Kunz MR44B, MR44K owner manual Safety Signs And Locations, Danger, Warning, Decal, Cut Hand & Foot

Page 4

SAFETY SIGNS AND LOCATIONS

SAFETY SIGNS AND LOCATIONS

275003 – Danger		275007 – Warning
275003 – Danger		275007 – Warning
Decal, Cut Hand & Foot		Decal, Belt Sheild

275002 – Warning

Decal, General

Serial # and Model #

Decal

Clean or Replace Any Safety Signs That Are not Readable or Damaged

Replacement decals can be purchased from your local dealer or

Kunz Engineering Inc.

Mendota, IL 61342

(815) 539-6954

3

Image 4

Contents With Assembly Instructions For Models MR44B & MR44KKUNZ ENGINEERING, INC. / MENDOTA, IL 61342 / PH 1/09SAFETY INTRODUCTION IMPORTANT SAFETY INFORMATION SAFETY SIGNS AND LOCATIONS Clean or Replace Any Safety Signs That Are not Readable or Damaged275003 - Danger 275007 - WarningASSEMBLY INSTRUCTIONS A. ASSEMBLY OF REAR WHEELS AND CARRIER ARMSYou should have Read the complete assembly instructions before starting the assemblyB. INSTALLATION OF CROSS BRACE TUBES AND HEIGHT ADJUST ASSY Figure 3 Cross Brace Tube Installation Offset Position C. INSTALLATION OF TONGUE ASSEMBLYDirect Behind Position OPERATIONS AND ADJUSTMENTS A. TONGUE CONFIGURATIONS AND ADJUSTMENTSB. ADJUSTING CUTTING HEIGHT Adjust the mower as follows D. SHUTTING OFF ROUGH CUT MOWER C. STARTING ENGINEE. MOWER OPERATION WARNING Do not fill fuel tank while engine is running or hot F. DRIVE BELT REMOVAL AND TENSION - Refer to Figure Disengaged Spring Length Brake Stud ClearanceH. LUBRICATION G. MOWER BLADE REMOVAL, BALANCING & INSTALLATIONI. STORAGE ACREASE ROUGH CUT MOWER SPECIFICATIONS DIMENSIONSModel ENGINEACREASE ROUGH CUT MOWER PARTS LIST DescriptionDescription UACREASE 44” ROUGH CUT MOWER PARTS 2933OPTIONAL WETLANDS KIT OPTIONAL EQUIPMENTShown on the 57” Rough Cut Mower OPTIONAL ELECTRIC LIFT KIT OPTIONALUEQUIPMENT OPTIONAL FLOATATION KIT