Kunz MR44K, MR44B Optionaluequipment, Optional Floatation Kit, Shown on the 57” Rough Cut Mower

Page 23

OPTIONALUEQUIPMENT

OPTIONALUEQUIPMENT

OPTIONAL FLOATATION KIT

The optional floatation kit consists of one additional front and rear tire, mounting brackets and hardware.

•Great for mowing around ponds and on rough uneven ground where scalping would normally occur.

•Clamping style receiver allows for adjustments from side to side with both the front and rear tires.

•Pinned receivers make for quick kit removal when not needed.

•Works on all existing and new rough cut mowers.

Shown on the 57” Rough Cut Mower

Rear Floatation Kit (Part # 003907)

Front Floatation Kit (Part # 003908)

22

Image 23

Contents 1/09 With Assembly InstructionsFor Models MR44B & MR44K KUNZ ENGINEERING, INC. / MENDOTA, IL 61342 / PHSAFETY INTRODUCTION IMPORTANT SAFETY INFORMATION 275007 - Warning SAFETY SIGNS AND LOCATIONSClean or Replace Any Safety Signs That Are not Readable or Damaged 275003 - DangerRead the complete assembly instructions before starting the assembly ASSEMBLY INSTRUCTIONSA. ASSEMBLY OF REAR WHEELS AND CARRIER ARMS You should haveB. INSTALLATION OF CROSS BRACE TUBES AND HEIGHT ADJUST ASSY Figure 3 Cross Brace Tube Installation Direct Behind Position C. INSTALLATION OF TONGUE ASSEMBLYOffset Position A. TONGUE CONFIGURATIONS AND ADJUSTMENTS OPERATIONS AND ADJUSTMENTSB. ADJUSTING CUTTING HEIGHT Adjust the mower as follows E. MOWER OPERATION C. STARTING ENGINED. SHUTTING OFF ROUGH CUT MOWER WARNING Do not fill fuel tank while engine is running or hot F. DRIVE BELT REMOVAL AND TENSION - Refer to Figure Brake Stud Clearance Disengaged Spring LengthI. STORAGE G. MOWER BLADE REMOVAL, BALANCING & INSTALLATIONH. LUBRICATION ENGINE ACREASE ROUGH CUT MOWER SPECIFICATIONSDIMENSIONS ModelDescription ACREASE ROUGH CUT MOWER PARTS LISTDescription 2933 UACREASE 44” ROUGH CUT MOWER PARTSShown on the 57” Rough Cut Mower OPTIONAL EQUIPMENTOPTIONAL WETLANDS KIT OPTIONAL ELECTRIC LIFT KIT OPTIONAL FLOATATION KIT OPTIONALUEQUIPMENT