25 2

specifications
amplifier section
power output 4W(watts)150/channel 150/bridged channel pair
power output 2W(watts)275/channel
distortion all channels driven 0.1% 20Hz to 20,000Hz
frequency response ±1dB 10Hz to 30,000Hz
signal-to-noise ratio full
bandwidth @ rated output power >90dB
damping factor @ output
connector full bandwidth >150
input sensitivity 100mV to 8Vrms for full output
input impedance 47 kW
recommended fuse type
P850 2 X 40 ATC
P650 2 X 30 ATC
P450 1 X 40 ATC
crossover section3
ch 1 & 2 high-pass
ch 3 & 4 high-pass & low-pass
ch 5 & 6 high-pass & low-pass (P850), low-pass (P650)
ch 7 & 8 low-pass
dimensions
P850 13" X 2" X 16 1/8" (330mm X 50mm X 410mm)
P650 13" X 2" X 141/8" (330mm X 50mm X 359mm)
P450 13" X 2" X 11 1/8" (330mm X 50mm X 283mm)
1 All channels driven, continuous FTC rated 4Wload, 20Hz to 20,000Hz, <0.1% THD,
power input voltage at 13.8DVC.
2 All channels driven, continuous FTC rated 2Wload, 20Hz to 20,000Hz, <0.1% THD,
power input voltage at 13.8DVC.
3 All channels are selectable with infinitely variable adjustments from 45Hz to 5,000Hz
with a slope rate of 12dB/octave and a "Q" of .707.
about this manual
To get the most from your a/d/s/ PowerPlateTM, we recommend that you have the installation
performed by your qualified authorized a/d/s/ dealer. If this unit is installed by your dealer, we will
extend the warranty to three years instead of the standard one year. However, if you feel that you
have the necessary skills and prefer to perform the installation yourself, this manual will guide you
through the process of installation and set-up. Please read through it completely before beginning
the installation so that you may familiarize yourself with the total procedure before you begin. If
there is anything that you do not fully understand, please consult with your a/d/s/ dealer before
attempting the installation.
keep listening, but be safe!
Sustained listening to loud music over 100dB has been shown to cause permanent hearing dam-
age. Systems using a/d/s/ components are capable of achieving volume levels which substantially
exceed this level. When operating your system for sustained periods at high volume, be sure to
use hearing protection to prevent long-term exposure. We want you to be able to enjoy the music
for many more years.
features of your PowerPlate™
Transient PerfectTMMOSFET Power Supply – The heart of the P-series, this supply frees the
PowerPlateTMfrom the constraints of common pwm (pulse width modulated) supplies. The advan-
tages are: extremely fast overload recovery time, low output
mpedance for superior damping, and stability during voltage fluctuations for reliable performance
in the harsh automotive environment.
Remote Subwoofer Control Capability – Can be used with accessory control AC502 to provide
a dashboard mounted subwoofer or rear channel level control
Detachable Plug in Connectors – High current speaker and power connectors
simplify installation.
Multi-crossTMVariable Built-in Crossovers – High-pass, Low-pass and Bandpass functions are
built-in, virtually eliminating the need for external crossover networks in even the most elaborate
systems.
PowerPlateTMDesign – a/d/s/ original low profile, high efficiency heatsink design keeps size mini-
mum and allows mounting where space is limited.
Wide Input Sensitivity Range – Allows connection to virtually any source unit from factory OEM
radios through low output preamps.
Simultaneous Stereo and Mono – Each channel pair may be used Stereo, Mono, Bridged or
both Stereo and Mono simultaneously. This allows an additional Mono speaker to be used with a
stereo pair for center-channel or subwoofer applications from each channel pair.
Same Side Adjustments – The P-series PowerPlateTM makes system adjustment easy by
organizing all signal processing controls on one side of the amplifier. This layout allows convenient
system adjustment and facilitates a variety of installation possibilities when access to the controls is
desired.