Marantz SR8200 manual Other Function

Page 43

OTHER FUNCTION

TV AUTO ON/OFF FUNCTION

This function allows the component connected to the TV-VIDEO in jack to control the power (ON/OFF) to the SR8200.

AUTO POWER ON

1. Be sure TV auto mode is ENABLE. (Refer page 30 : System Setup)

2. Connect your TV TUNER (etc) to the TV-VIDEO in terminal. Be sure to connect the VIDEO input.

3. Turn OFF the power to the TV TUNER and the SR8200.

4. Turn ON the TV TUNER and tune in a receivable station.

5. When the station is received, the SR8200 turns ON and TV is selected automatically.

AUTO POWER OFF

1. In the above situation, turn the TV TUNER OFF or select a channel that does not contain any broadcast.

2. The power to the SR8200 switches to STANDBY after approx. 5 minutes.

Notes:

AUTO POWER OFF is canceled if the SR8200 is set to a source other than TV.

The function reactivates when TV is selected again.

Some TV broadcasts may cause the TV AUTO FUNCTION to turn ON.

S-Video terminal does not support “TV AUTO ON/OFF” function.

ATTENUATION TO ANALOG INPUT SIGNAL

 

 

 

 

 

 

 

 

 

 

 

 

VOLUME

PLAY

CLEAR

MEMO

 

DOWN

 

TUNING

UP

F/P

T-MODE

P-SCAN

DOWN

UP

N

DVD

DSS

 

TV

VCR1

VCR2/DVD-R

CD

TAPE

CD-R

TUNER

MUTE

ATT

MULTIMULTIROOM-SPK

SLEEPA/D

S-NIGHTDIRECT

AUX1AUX2

 

DIGITAL

S-VIDEO

VIDEOAUX1INPUTL AUDIO

R

 

 

If the selected analog audio input signal is greater than the capable level of internal processing, “PEAK” indicator will light up on the front display. If this happens, you should press the ATT button or tap ATT on the remote.

ATT” indicator will light up when this function is activated. The signal- input level is reduced by about the half. Attenuation will not work with the output signal of TAPE-OUT, CD-R/MD-OUT, VCR1-OUT, VCR2- OUT and MULTI ROOM OUT.

This function is memorized for each individual input source.

LISTENING OVER HEADPHONES

This jack may be used to listen to the SR8200’s output through a pair of headphones. Be certain that the headphones have a standard 1/4" stereo phone plug. (Note that the main room speakers will automatically be turned off when the headphone jack is in use.)

 

 

DISPLAY

CLEAR

MEMO

 

DOWN

TUNING

SELECT

ENTER

7.1CH-IN

DVD

DSS

TV

VCR1

V

POWERSTANDBYON/STANDBY

PHONES

MULTIMULTIROOM-SPK

SLEEPA/D

S-NIGHTDIRECT

AUX1AUX2

 

Notes:

When using headphones, the surround mode will automatically change to STEREO.

The surround mode returns to the previous setting as soon as the plug is removed from the jack.

VIDEO ON/OFF

 

ENGLISH

OUT and VCR2-OUT and MULTI ROOM OUT.

When no video signals of a DVD, etc., are connected to the SR8200 or

 

the DVD, etc., are connected directly to a TV, the unnecessary video circuit can be turned off by selecting the “VIDEO OFF” setting.

To select video off condition, tap Video off on the remote.

Notes that VIDEO OFF will not work with the output signal of VCR1-

DISPLAY MODE

 

SELECTOR

 

 

 

 

 

 

 

 

 

 

 

 

 

DISPLAY

CLEAR

MEMO

 

DOWN

 

TUNING

UP

F/P

T-MODE

P-SC

SELECT

ENTER

7.1CH-IN

DVD

DSS

 

TV

VCR1

VCR2/DVD-R

CD

TAPE

CD-R

 

POWERSTANDBYON/STANDBY

PHONES

MULTIMULTIROOM-SPK

SLEEPA/D

S-NIGHTDIRECT

AUX1AUX2

 

DIGITAL

S-VIDEO

VIDEOAUX1INPUTL AUDIO

R

You can select the display mode for the front display of the SR8200. To select this mode, press DISP button on the front panel or tap Display on the remote control unit.

When this button is pressed, the display mode is switched in the following sequence.

Auto-display Off Display Off Normal Auto-display Off ....

In Auto display off mode, turn the display on automatically, after that any condition of SR8200 is changed.

In Display off mode, turn the display off completely.

Notes:

Only Disp will light up on the front display in display off condition

SELECTING ANALOG AUDIO INPUT OR

DIGITAL AUDIO INPUT

 

SELECTOR

 

 

 

 

 

 

 

 

 

 

 

 

 

DISPLAY

CLEAR

MEMO

 

DOWN

 

TUNING

UP

F/P

T-MODE

P-SC

SELECT

ENTER

7.1CH-IN

DVD

DSS

 

TV

VCR1

VCR2/DVD-R

CD

TAPE

CD-R

 

POWERSTANDBYON/STANDBY

PHONES

MULTIMULTIROOM-SPK

SLEEPA/D

S-NIGHTDIRECT

AUX1AUX2

 

DIGITAL

S-VIDEO

VIDEOAUX1INPUTL AUDIO

R

If you have already assign any digital input to input source.

You can select temporarily the audio input mode for each input source with A/D button on the remote controller or front panel.

When this button is pressed, the input mode is switched in the following sequence.

Digital Auto Digital Analog Digital Auto....

In Digital Auto mode, the types of signals being input to the digital and analog input jacks for the selected input source are detected automatically.

If no digital signal is being input, the analog input jacks are selected automatically.

In Digital mode, input is fixed to an assigned digital input terminal. In analog mode, the analog input jacks are selected.

This selecting is temporarily, so the result will not be stored in memory. If you need to change input mode completely, use SYSTEM SETUP in

OSD menu system.(see page 28)

39

Image 43
Contents Model SR8200 User Guide Risk of Electric Shock Read Before Operating Equipment Important Safety InstructionsPage Table of Contents AUDIO/VIDEO Features FeaturesAmplifier Features Flexbility FeaturesDescription English Front Panel 6AUX1 input jacks @5PHONES jack for stereo headphones4MUTE button 5INPUT Function Selector buttons AUDIO/ VideoMUSIC, PRO Logic FL DisplayCINEMA, Music ¡5PEAK indicator ¡2AUTO.SURR Auto Surround mode indicator¡3THX Surr EX THX Surround EX mode indicator ¡4DTS-ES mode indicators DISC6.1 MTX6.1SBR, C Rear Panel⁄3AUDIO IN/OUT CD, TAPE, CD-R, TV DVD, DSS, VCR1, VCR2 ⁄0AC Inlet⁄1AC Outlets ⁄2VIDEO IN/OUT TV, DVD, DSS, VCR1 VCR2Loading Batteries Operating Devices Activating the RC3200AREMOTE-CONTROLLABLE Range Input Select Tone AdjustOperating AMP & Tuner MainMulti Room Surround ModeTuner Tuner page 2/3 Show the Status of SR8200 on LCD of RC3200ATuner page 3/3 Change the Beep volume Adjusting the SettingsFirst Setup Adjust the Backlight TimeoutThird Setup Second SetupTo Exit Setup Mode Tip Learning CommandsRecording Macros Learn SequenceEnglish Minimum System Requirements RC3200 EditHOW to Reset the RC3200A Cleaning RC3200AImportant Notices Digiinptalut ConnectingConnecting the Monitor and Video Camera Connecting the Video Components with S-VIDEO / Component24 MA700 Connecting the Digital / 7.1CH InputConnecting the Speakers SM6100Connecting the Antenna and P WER Cord Connecting the Speakers with External AmplifierConnecting for the Multi Room Connecting the Remote Control BUS RC-5On Screen Display Menu System SetupTo select the input source, press Up or Down cursor button Speaker SetupSpeaker Size Six digital inputs can be assigned as the desired sourceSpeakers Level Speaker Distance Time AlignmentBass Peak Level PreferencePL2 PRO Logic II Music Parameter SurroundEffect Level To Select desired channel , press Up or Down cursor button DC Trigger SetupSelect 7.1CH Main Setup Menu with Up or Down CH Input LevelBasic Operation Play Back Selecting the Surround ModeAdjusting the Main Volume Adjusting the Tonebass & Treble ControlNight Mode Using the Sleep TimerDialogue Normalization Message Surround Mode CS-Cinema, CS-Music Circle SurroundMulti CH. Stereo VirtualPL2-PL Neo6Multi Ch VirtualStereo Other Function Recording a Digital Source Recording AN Analog SourceListening to AUX2 Input CH InputBasic Operation Tuner Preset MemoryListening to the Tuner Preset Scan Manual Preset MemoryRecalling a Preset Station Checking the Preset StationsName Input of the Preset Station Sorting Preset StationsC ...Z 1 2 3.... + / Blank a UP Down Second Room Multi Room Playback Using Multi Room OUT TerminalsMulti Room Playback Using Multi Speaker Terminals Multi Room SystemAre the power amplifiers and speaker working properly ? TroubleshootingGeneral Malfunction Memory backupFM Tuner Section Technical SpecificationsIs a registered trademark

SR8200 specifications

The Marantz SR8200 is a remarkable AV receiver that has garnered attention from audio enthusiasts for its exceptional performance and advanced features. Released as part of Marantz’s prestigious lineup, it showcases a perfect blend of powerful audio capabilities and sophisticated technology, making it an ideal choice for home theater setups.

One of the standout features of the SR8200 is its multi-channel amplifier, which delivers up to 110 watts per channel across seven channels. This capability ensures that users can experience immersive surround sound, whether they are watching movies or listening to music. The amplifier utilizes a high-current design, allowing it to drive demanding speakers with ease, contributing to an overall dynamic listening experience.

In terms of audio technologies, the Marantz SR8200 is equipped with DTS and Dolby Digital decoding, providing support for a variety of surround sound formats. These technologies enhance the audio experience by delivering crisp and detailed sound, effectively transporting listeners into the heart of their favorite entertainment. Additionally, the receiver incorporates Marantz's proprietary HDAM (Hyper-Dynamic Amplifier Module) technology. This ensures low noise levels and high-speed response, further improving sound quality across the frequency spectrum.

The SR8200 also features a powerful DSP (Digital Signal Processing) engine, which allows for various audio modes and surround processing options such as 5.1 and 7.1 channel setups. Users can customize their audio experience to match their preferences or the specifics of their room layout. Moreover, the receiver is equipped with an extensive array of input and output options, including multiple HDMI ports, component video inputs, and analog connections, making it versatile for various audio and visual sources.

For ease of use, the SR8200 comes with an intuitively designed remote control and an on-screen display that simplifies navigation through settings and features. It also includes a room calibration system, which analyzes the acoustics of the room and automatically adjusts the speaker settings to ensure optimal sound staging.

In conclusion, the Marantz SR8200 represents a high-quality AV receiver that combines powerful amplification, advanced audio technologies, and user-friendly features. Its ability to deliver stunning audio performance makes it a worthy investment for enthusiasts looking to enhance their home theater experience. With its robust build quality and stylish design, the SR8200 is not just an audio device, but a key component in creating a rich and engaging entertainment environment.