Marantz SR8200 Multi Room System, Multi Room Playback Using Multi Room OUT Terminals, Second Room

Page 49

MULTI ROOM SYSTEM

The Multi Room system is a function which allows you to listen to the same or a different source in a room other than the room in which the SR8200 is located.

To use this function, a multi room remote unit and remote control signal receiver available from your Marantz dealer are necessary. The operations possible with the multi room function are explained briefly below.

For details, refer to the instruction manual supplied with the multi room remote control unit and receiver.

When the outputs of the MULTI ROOM OUT terminals are wired and connected to amplifiers installed in other rooms or MULTI SPEAKER OUT terminals are wired and connected to L&R speakers in other room, different sources can be played in rooms other than the main room in which this unit and the playback devices are installed.

SR8200 has some feature to MULTI ROOM SYSTEM as source selector, OSD information, sleep timer, Multi Room Speaker output and remote control.

MULTI ROOM PLAYBACK USING THE

MULTI ROOM OUT TERMINALS

The SR8200 is equipped with audio pre-out terminals for which the volume is adjustable and composite video output terminals as the MULTI ROOM output terminals.

A separately sold stereo power amplifier (PM8100) can be connected to enjoy multi room playback.

Operation to MULTI ROOM OUT without the remote controller.

 

 

1.

 

4.

 

 

 

 

 

 

3.

 

 

SELECTOR

 

 

 

 

 

 

 

 

 

 

 

VOLUME

 

 

DISPLAY

CLEAR

MEMO

 

DOWN

TUNING

UP

F/P

T-MODE

P-SCAN

DOWN

UP

SELECT

ENTER

7.1CH-IN

DVD

DSS

TV

VCR1

VCR2/DVD-R

CD

TAPE

CD-R

TUNER

MUTE

ATT

POWERSTANDBYON/STANDBY

PHONES

MULTIMULTIROOM-SPK

SLEEPA/D

S-NIGHTDIRECT

AUX1AUX2

DIGITAL

S-VIDEO

VIDEOAUX1INPUTL AUDIO

R

 

 

1. Press the MULTI button. The unit enters multi room mode and the display indicates “SELCT SOURCE” and flashes the “MULTI” indicator for approx. 10 seconds.

2. In this time, you can select the input source by pressing the input selector buttons.

Then, the display indicates “MULTI VOL” “VOLUME xx dB” for approx. 5 seconds.

3. During this time, you can set the volume level in the multi room as desired.

This will only set the volume in the second room.

4. If you desire to set sleep timer to multi room, press SLEEP button to setup the time.

MULTI ROOM PLAYBACK USING THE

MULTI SPEAKER TERMINALS

The SR8200 allows you to connect another set of speakers and place them in a different room or separated area for listening to music. Operation to MULTI ROOM SPEAKER without the remote controller.

 

 

1.

 

4.

 

 

 

 

 

 

2.

3.

 

SELECTOR

 

 

 

 

 

 

 

 

 

 

 

VOLUME

 

 

DISPLAY

CLEAR

MEMO

 

DOWN

TUNING

UP

F/P

T-MODE

P-SCAN

DOWN

UP

SELECT

ENTER

7.1CH-IN

DVD

DSS

TV

VCR1

VCR2/DVD-R

CD

TAPE

CD-R

TUNER

MUTE

ATT

POWERSTANDBYON/STANDBY

PHONES

MULTIMULTIROOM-SPK

SLEEPA/D

S-NIGHTDIRECT

AUX1AUX2

DIGITAL

S-VIDEO

VIDEOAUX1INPUTL AUDIO

R

 

 

1. Press the MSPK button. The unit enters multi room mode and the display indicates “SELCT SOURCE” and flashes the “MULTI” & “M-SPKR” indicators for approx. 10 seconds.

2.

In this time, you can select the input source by pressing the input

ENGLISH

3.

selector buttons.

Then, the display indicates “MULTI VOL” “VOLUME xx dB” for

 

 

approx. 5 seconds.

 

 

During this time, you can set the volume level in the multi room as

 

 

desired.

 

4.

This will only set the volume in the multi room.

 

If you desire to set sleep timer to multi room, press SLEEP button

 

to setup the time.

Notes for MULTI ROOM SPEAKER

•MULTI ROOM SPEAKER On/ Off is available in main room only.

•You can only play the source in the Stereo mode or Virtual mode in the main room, when MULTI SPEAKER is active.

•You can not turn MULTI SPEAKER on, when you set Speaker setup in OSD menu.

OPERATION TO MULTI ROOM OUTPUTS WITH THE REMOTE CONTROLLER FROM

SECOND ROOM.

1.

1. Tap the MULTI ROOM on on multi room remote control unit from the MULTI ROOM.

This operations will put the SR8200 into multi room mode and “MULTI” will light in the display.

MULTI ROOM Video output will show OSD information to condition of MULTI ROOM setup.

MU L T I ROOM

MU L T I ROOM

:

O F F

MU L T I S P KR

: O F F

V I D EO

:

D V D

A UD I O

:

D V D

V O L UME S E T U P

:

V AR I AB L E

V O L UME L E V E L

:

- 9 0 d B

S L E E P T I ME R

: O F F

- - - - MA I N - ROOM

 

S T A T U S - - - -

V I D EO : D V D

AUD I O : D V D

MA I N

 

E X I T

2. Press the VOL + or VOL – button on the multi room remote control unit to set the desired sound volume.

3. In multi room mode, the multi room remote control unit can be used in the multiroom to operate the following functions.

General:

Controlling volume level, sleep timer, and muting. Selecting input audio and video source

Tuner:

Selecting band, controlling preset channel up and down, tuning up and down, direct frequency call.

Notes for multi room system:

•The MULTI ROOM OUT and MULTI SPEAKER terminals are analog outputs.

These are not support to digital signals input.

If no sound is heard from the selected input source, check if the component is connected to the analog inputs.

•If Tuner (FM or AM) is active in main room, you can not control any function of tuner.

In this case, You can listen the same condition as main room.

45

Page 48 Page 50
Image 49
Page 48 Page 50
Contents Model SR8200 User Guide Risk of Electric Shock Read Before Operating Equipment Important Safety InstructionsPage Table of Contents Amplifier Features FeaturesFlexbility Features AUDIO/VIDEO FeaturesDescription English Front Panel 4MUTE button @5PHONES jack for stereo headphones5INPUT Function Selector buttons AUDIO/ Video 6AUX1 input jacksMUSIC, PRO Logic FL DisplayCINEMA, Music ¡3THX Surr EX THX Surround EX mode indicator ¡2AUTO.SURR Auto Surround mode indicator¡4DTS-ES mode indicators DISC6.1 MTX6.1 ¡5PEAK indicatorSBR, C Rear Panel⁄1AC Outlets ⁄0AC Inlet⁄2VIDEO IN/OUT TV, DVD, DSS, VCR1 VCR2 ⁄3AUDIO IN/OUT CD, TAPE, CD-R, TV DVD, DSS, VCR1, VCR2Loading Batteries Operating Devices Activating the RC3200AREMOTE-CONTROLLABLE Range Operating AMP & Tuner Tone AdjustMain Input SelectMulti Room Surround ModeTuner Tuner page 2/3 Show the Status of SR8200 on LCD of RC3200ATuner page 3/3 First Setup Adjusting the SettingsAdjust the Backlight Timeout Change the Beep volumeThird Setup Second SetupTo Exit Setup Mode Recording Macros Learning CommandsLearn Sequence TipEnglish Minimum System Requirements RC3200 EditHOW to Reset the RC3200A Cleaning RC3200AImportant Notices Digiinptalut ConnectingConnecting the Monitor and Video Camera Connecting the Video Components with S-VIDEO / ComponentConnecting the Speakers Connecting the Digital / 7.1CH InputSM6100 24 MA700Connecting the Antenna and P WER Cord Connecting the Speakers with External AmplifierConnecting for the Multi Room Connecting the Remote Control BUS RC-5On Screen Display Menu System SetupSpeaker Size Speaker SetupSix digital inputs can be assigned as the desired source To select the input source, press Up or Down cursor buttonSpeakers Level Speaker Distance Time AlignmentBass Peak Level PreferencePL2 PRO Logic II Music Parameter SurroundEffect Level Select 7.1CH Main Setup Menu with Up or Down DC Trigger SetupCH Input Level To Select desired channel , press Up or Down cursor buttonAdjusting the Main Volume Selecting the Surround ModeAdjusting the Tonebass & Treble Control Basic Operation Play BackNight Mode Using the Sleep TimerDialogue Normalization Message Surround Mode Multi CH. Stereo Circle SurroundVirtual CS-Cinema, CS-MusicPL2-PL Neo6Multi Ch VirtualStereo Other Function Recording a Digital Source Recording AN Analog SourceListening to AUX2 Input CH InputBasic Operation Tuner Preset MemoryListening to the Tuner Recalling a Preset Station Manual Preset MemoryChecking the Preset Stations Preset ScanName Input of the Preset Station Sorting Preset StationsC ...Z 1 2 3.... + / Blank a UP Down Multi Room Playback Using Multi Speaker Terminals Multi Room Playback Using Multi Room OUT TerminalsMulti Room System Second RoomAre the power amplifiers and speaker working properly ? TroubleshootingGeneral Malfunction Memory backupFM Tuner Section Technical SpecificationsIs a registered trademark

SR8200 specifications

The Marantz SR8200 is a remarkable AV receiver that has garnered attention from audio enthusiasts for its exceptional performance and advanced features. Released as part of Marantz’s prestigious lineup, it showcases a perfect blend of powerful audio capabilities and sophisticated technology, making it an ideal choice for home theater setups.

One of the standout features of the SR8200 is its multi-channel amplifier, which delivers up to 110 watts per channel across seven channels. This capability ensures that users can experience immersive surround sound, whether they are watching movies or listening to music. The amplifier utilizes a high-current design, allowing it to drive demanding speakers with ease, contributing to an overall dynamic listening experience.

In terms of audio technologies, the Marantz SR8200 is equipped with DTS and Dolby Digital decoding, providing support for a variety of surround sound formats. These technologies enhance the audio experience by delivering crisp and detailed sound, effectively transporting listeners into the heart of their favorite entertainment. Additionally, the receiver incorporates Marantz's proprietary HDAM (Hyper-Dynamic Amplifier Module) technology. This ensures low noise levels and high-speed response, further improving sound quality across the frequency spectrum.

The SR8200 also features a powerful DSP (Digital Signal Processing) engine, which allows for various audio modes and surround processing options such as 5.1 and 7.1 channel setups. Users can customize their audio experience to match their preferences or the specifics of their room layout. Moreover, the receiver is equipped with an extensive array of input and output options, including multiple HDMI ports, component video inputs, and analog connections, making it versatile for various audio and visual sources.

For ease of use, the SR8200 comes with an intuitively designed remote control and an on-screen display that simplifies navigation through settings and features. It also includes a room calibration system, which analyzes the acoustics of the room and automatically adjusts the speaker settings to ensure optimal sound staging.

In conclusion, the Marantz SR8200 represents a high-quality AV receiver that combines powerful amplification, advanced audio technologies, and user-friendly features. Its ability to deliver stunning audio performance makes it a worthy investment for enthusiasts looking to enhance their home theater experience. With its robust build quality and stylish design, the SR8200 is not just an audio device, but a key component in creating a rich and engaging entertainment environment.
Top Page Image Contents