King Kutter manual Rotary Mower Operation Step

Page 21

Note: For best results in heavier cutting conditions adjust the deck so the rear of the mower is approximately 2" higher than the front. This method requires less horsepower and ground speeds of approximately 3-5mph. If finer shredding results are desired, adjust the deck to level or slightly lower in the rear. This method will keep foilage under the deck longer resulting in finer pieces. The down side of this method is if it takes alot more horsepower and very slow ground speed. This method is not reccommended unless a PTO speed of 540 RPM can be maintained.

ROTARY MOWER OPERATION

STEP 1

Before each use perform the maintenance described in maintenance section. (page 22)

STEP2

Read, understand, and follow the information on safety training, preparation, starting and stopping safety, operational safety, transport safety warning sections of this manual (pages 11 thru 16)

STEP 3

With tractor running, lower rotary mower into working position.

STEP 4

With the tractor at idle RPM, engage PTO and slowly advance throttle to 540 PTO RPM. NOTE: Rotary mower designed to run at 540 PTO RPM only.

STEP 5

Select a low gear for the tractor and begin to mow. Tractor ground speed is to be con- trolled by gear selection only and not engine speed. Tractor ground speed should allow rotary mower to maintain 540 PTO RPM and thus maximum blade tip speed.

NOTE: Do not allow the tractor engine or rotary mower to bog down or stall. This causes undue wear and tear on the mower and tractor. If this continues to happen reduce ground speed and raise cutting height of rotary mower until the 540 PTO RPM is able to be maintained.

Never attempt to clean out a plugged discharge chute until the tractor has been shut down and the mower blades have completely stopped.

STEP 6

After each use clean all debris from the top and bottom of the rotary mower. Replace any missing or illegible safety decals. Inspect for any damaged or worn parts and replace before next use. Store rotary mower in a dry environment.

21

Image 21
Contents Rotary Mower Operation and Parts Manual Page To the Purchaser Page Contents Signal Words SafetyEquipment Safety Guidelines Figure E Rotary Mower Assembly Instructions StepFigure a Figure G Before Putting Rotary Mower Into Service Safety Training Prepartion Starting and Stopping SafetyOperational Safety Operational Safety Transport Safety Curely Block Rotary Mower in Position Attaching to TractorAttaching to Tractor Sizing PTO Shaft Step PRE-OPERATIONAL Adjustments Cutting Height AdjustmentOperating Instructions Rotary Mower Operation Step Grease points at arrows Joints MaintenanceStorage Safety Maintenance SafetySafety Sign Locations Page Page Page Page Part Name Part Number 147022 147029 147034 Shear PIN PTO ShaftPart Name Part Number 147129 147134 147248 Slip Clutch PTO ShaftPart Name Part Number Slip Clutch AssemblyPart Name Part Number Rotary Mower Size Rotary Mower Lift60hp 80hp Heavy Duty Lift 5 MowerPart Name Part Number Rotary Mower Size 60hp 80hp Heavy Duty Lift 6 & 7 Mower40hp Rotary Mower PullPull Mower LA Magdalena Eurocardan SeriesPage PTO Shafts Cover Removal Eurocardan Series HP Gearbox Part Name Gearbox 184000 184005 184010 HP Gearbox Part Name Gearbox 184060 184065 HP Gearbox Part Name Gearbox 184080 Warranty of Title LimitedWarrantyWhat is Not Covered by This Limited Warranty No Other Warranties

Rotary Mower specifications

The King Kutter Rotary Mower stands as a benchmark in the realm of lawn and field maintenance, offering a robust solution for both professional landscapers and avid gardeners. Renowned for its durability and performance, the King Kutter Rotary Mower is designed to tackle the toughest mowing jobs.

One of the primary features of the King Kutter Rotary Mower is its solid construction. Built with heavy-duty materials, the mower can withstand the rigors of continuous use. The mower deck, available in various sizes, is crafted from high-grade steel, ensuring resistance against wear and tear. Additionally, its powder-coat finish protects against corrosion, making it ideal for different weather conditions and terrains.

The mower is powered by a reliable gearbox drive system, which provides efficient power transfer from the tractor to the blades. This technology allows for consistent mowing performance even in tough conditions. The rotary blades are designed for optimal cutting efficiency, ensuring a clean, even cut. Adjustable blade heights give users the flexibility to choose the desired cutting length, accommodating various grass types and conditions.

The King Kutter Rotary Mower also features an innovative chain drive design, which enhances reliability and minimizes maintenance needs. This feature, combined with its easy-to-access grease fittings, allows users to keep the mower in prime condition with minimal effort.

Safety is another paramount characteristic of the King Kutter Rotary Mower. The mower is equipped with a front-mounted shield for protection against flying debris. Moreover, it incorporates a slip clutch that disengages the mower blades in case of obstacles, preventing potential damage to both the mower and the tractor.

Comfort and ease of use are hallmarks of this rotary mower. The mower's design includes a Category 1 hitch, which enables quick and straightforward attachment to a variety of tractors. The adjustable tail wheel provides improved maneuverability, ensuring that users can navigate tight spaces and uneven terrain with ease.

In conclusion, the King Kutter Rotary Mower exemplifies a perfect blend of strength, safety, and versatility. Whether for residential yards or larger agricultural fields, it stands ready to deliver exceptional mowing performance and reliability, making it a preferred choice for outdoor maintenance enthusiasts.