Component Markings, Component Connection

	Figure 3
MAIN POWER	main power of the sauna room
HT1, HT2,	heaters power output cable
READING LAMP	reading lamp power output cable
CTRL PANEL	control panel connecting
CD/SIG	signal cable group

10) COMPONENT MARKINGS

For easy and proper installation, please read the information below thoroughly to make sure all connections are correct. (see form 1)

MARKING

POWER

FUSE

HT1, HT2

LIGHT

CTRL

L/SPEAKER

R/SPEAKER

BUZZER

TEMP SENSOR

COMPONENT CONNECTION

Power cord

Fuse (15A) (reset) Heater power cord Reading lamp connector Control panel connecting Left speaker plug Right speaker plug Buzzer plug Temperature sensor

Form 1

Please read the operating instructions carefully before assembly. 2 adults are required for the sauna installation.

The power cord is taken out of the TOP COVER, do not plug in power during installation.

Figure20

Figure 21

11) Connect all the plugs on the TOP PANEL

1>. Plug in according to the respective label. (see figure 23-25)

2>. Connect the CTRL plug from the CONTROL BOX and CTRL plug from the CONTROL PANEL, then screw