Marantz SR6400 manual Example, Now, execute the macro you just programmed

Page 34

USING MACROS

3. Press CD, 3 , and 3 buttons.

The following procedure will show how to use the

 

function buttons for which you have programmed

(2)

macros.

 

1. Press the Function button for the desired macro for 3 seconds.

• MACRO is displayed on the LCD for approximately 1 second, after which the number of steps in the macro is displayed on the LCD.

Example 2

Turn the main amplifier ON → Change the amplifier’s input source to DVD → Set the Surround mode to VIRTUAL → Set the DVD player to PLAY.

1. Press and hold the T.MODE and MENU button until the MACRO is displayed on the LCD.

• LEARN and MACRO are displayed blinking.

2. Press the DVD Function button .

Now, execute the macro you just programmed.

1.Press the DVD Function button for 3 seconds. The macro commands are transmitted in order, and the steps of the operations are displayed on LCD in order.

ENGLISH

(3)

(1)

• Here the DVD Function button is used as

the macro button, but any function button

can in fact be used.

•The remote control will do nothing if no macros are programmed. The macro steps are executed in order and the names of their buttons are displayed on the LCD. Also, the step numbers displayed on the LCD disappear as each step is executed.

2.After all macro commands have been transmitted, the remote control returns to AMP in use mode.

EXAMPLES OF MACRO PROGRAMS

Example 1

Change the input source for the amplifier to CD and play the 3rd track on a CD in the CD player.

1. Press and hold the T.MODE and MENU button until the MACRO is displayed on the LCD.

•LEARN and MACRO is displayed blinking.

2. Press the CD Function button. CD-M is displayed on the LCD.

4. When you are finished programming the macro, press the OK button until the display returns to USE mode.

Now, execute the macro you just programmed.

1. Press the CD Function button for 3 seconds.

•The macro commands are transmitted to the components in order, and the steps of the operations are displayed on the LCD in order.

3. To set the various steps of the macro, press the following buttons in order:

(1)AMP*→ (2) POWER ON → (3) DVD → (4) AMP*→ (5) 8 (VIRTUAL) → (6) DVD* → (7)

3.

(2)

(5)

(7)

(3) (6)

(1) (4)

4. When you are finished programming the macro, press the OK button until the display returns to USE mode.

•When executing this macro, function operations AMP* and DVD* only switch the command set of the remote controller and no signal is transmitted to the component.

CLEARING MACRO PROGRAMS

The following procedure is used to erase macros you have programmed into the remote controller’s memory.

1. Press and hold the T.MODE and MENU button until the MACRO is displayed on the LCD.

•LEARN and MACRO are displayed blinking.

2. Press and hold the CL button, then press the button for the Function to be cleared (in this case DVD) for 3 seconds.

DVDCL will appear on the LCD.

31

Page 33 Page 35
Image 34
Page 33 Page 35
Contents Model SR6400 User Guide Cleaners or aerosol cleaners. Use a damp Cleaning Unplug this product from the wallOutlet before cleaning. Do not use liquid Cloth for cleaningLightning and power-line surges Power-Cord Protection Power-supply cordsProduct during a lightning storm, or when it is Power Lines An outside antenna systemTable of Contents Introduction PrecautionsDescription Features AccessoriesFront Panel FL Display PCM⁄16.1 Channel Input Rear PanelAC Outlets ⁄3AUDIO IN/OUT CD, TAPE, CD-R, TV DVD, VCR1, DSS/VCR2Names and Functions When Tuner mode is selected European model only Loading Batteries Remote Control RangeGeneral Information Remote-controllable rangeConnecting Speakers Speaker PlacementConnections Connecting a Subwoofer Connecting Audio ComponentsConnecting Banana Plug Connecting Digital Audio ComponentsVideo jack Connecting Video ComponentsThere are 3 types of video jacks on the rear panel Component jackConnecting Multi Channel Audio Source Advanced ConnectingConnecting the Remote Control Jacks Connecting AN External Power AmplifierConnecting the supplied AM loop antenna Connecting the Antenna TerminalsPlace the antenna on stable surface Select the AMP mode on the remote control SetupOn Screen Display Menu System Speaker Setup InputPreference CS II Circle Surround Parameter SurroundPL II PRO Logic II Music Parameter CH Input LevelBasic Operation Selecting the Surround ModeAdjusting the Main Volume Selecting AN Input SourceDolby Digital EX Surround ModeDolby Digital DTS-ES Discrete 6.1, MatrixThis mode bypasses all surround processing Mode and the input signal Relation between the selected surroundOther Function Signal TV Auto ON/OFF FunctionDisplay Mode Attenuation to Analog InputSpeaker A/B HT-EQCH Input Tuner Preset MemoryListening to the Tuner → B → C ... Z → 1 → 2 → 3 .... → → + → / → Blank → a UP → ← DownControlling a Marantz CD Player CD Mode Remote Controller OperationControlling Marantz Components Controlling a Marantz MD Deck MD Mode Controlling a Marantz CD Recorder CDR ModeControlling a Marantz Tape Deck Tape Mode Erasing the code by buttons Learn ModePower on and Power OFF button Erasing the code by functionsMacro Mode Example Now, execute the macro you just programmedTroubleshooting MCRxxMemory backup General MalfunctionTechnical Specifications Dimensions Is a registered trademark
Top Page Image Contents