Marantz SR6400 manual FL Display, Pcm

FL DISPLAY

s	d		g	j l ¡1 ¡3
a		f	h	k ¡0¡2		¡4
DISP	AUTO	TUNED	ST V – OFF	NIGHT PEAK ATT ANALOG		SURROUND
¡7 SLEEP	AUTO SURR	DIRECT	DISC 6.1 MTX 6.1 SPKR AB EQ		DIGITAL	DIGITAL
						L	C	R
					PCM		LFE
						SL	S	SR

		¡6	¡5
a	DISP (Display Off) indicator	k	SPKR (speaker) AB indicator
This indicator is illuminated when the SR6400 is in		Active speaker system will be illuminated by this
the display off condition.		indicator.
s	SLEEP timer indicator	l	PEAK indicator

¡5ENCODED CHANNEL STATUS indicators

These indicators display the channels that are encoded with a digital input signal. If the selected digital input signal is Dolby Digital 5.1ch or DTS 5.1ch, “L”, “C”, “R”, “SL”, “SR” and “LFE” will is illuminated. If the digital input signal is 2 channel PCM-audio, “L” and “R” will be displayed.

If Dolby Digital 5.1ch signal with Surround EX flag or DTS-ES signal comes in, “L”, “C”, “R”, “SL”, “S” , “SR” and “LFE” will be illuminated.

¡6Main Information Display

This display shows messages relating to the status, input source, surround mode, tuner, volume level or other aspects of unit’s operation.

¡7DIRECT (Source direct) indicator

This indicator is illuminated when the SR6400 is in the SOURCE DIRECT mode.

ENGLISH

This indicator is illuminated when the sleep timer function is in use.

dAUTO SURR (Auto Surround mode)

indicator

This indicator illuminates to show that the AUTO SURROUND mode is in use.

fTUNER’s indicators

AUTO : This indicator illuminates when the tuner’s Auto mode is in use.

TUNED : This indicator illuminates when a station is being received with sufficient signal strength to provide acceptable listening quality.

ST(Stereo) : This indicator illuminates when an FM station is being tuned into stereo.

gDTS-ES mode indicators (DISC6.1, MTX6.1) These indicators will illuminate to show the DTS- ES decoding mode (Discrete 6.1 or Matrix 6.1).

hV (video)-OFF mode indicator

This indicator is illuminated when the Video-OFF function is active.

jNIGHT mode indicator

This indicator is illuminated when the SR6400 is in the Night mode, which reduces the dynamic range of digital program material at low volume levels.

This indicator is a monitor for an analog audio input signal. If the selected analog audio input signal is greater than the capable level of internal processing, this will illuminate. If this happens, you should press the ATT button.

¡0EQ mode indicator

This indicator is illuminated when the HT-EQ function is active.

¡1ATT (Attenuation) indicator

This indicator is illuminated when the attenuation function is active.

¡2DIGITAL Input Indicator

This indicator is illuminated when a digital input has been selected.

¡3ANALOG input indicator

This indicator is illuminated when an analog input source has been selected.

¡4SIGNAL FORMAT indicators

2DIGITAL, EX, 2 SURROUND, dts, ES, 96/24,

PCM

When the selected input is a digital source, some of these indicators will be illuminated to display the specific type of signal in use.

5