Jonsered RS52 Federal Emission Control Warranty Statement, Your Warranty Rights and Obligations

Page 31

FEDERAL EMISSION CONTROL WARRANTY STATEMENT

YOUR WARRANTY RIGHTS AND OBLIGATIONS

The EPA (The US Environmental Protection Agency), Environment Canada and Jonsered are pleased to explain the emissions control system warranty on your 2001 and later small nonroad engine. In U.S. and Canada, new small nonroad engines must be designed, built and equipped to meet the federal stringent anti-smog standards. Jonsered must warrant the emission control system on your small nonroad engine for the period of time listed below provided there has been no abuse, neglect or improper maintenance of your unit.Your emmission control system includes Parts such as the carburetor and the ignition system. Where a warrantable condition exists, Jonsered will repair your small nonroad engine at no cost to you. Expenses covered under warranty include diagnosis, parts and labor.

MANUFACTURER′S WARRANTY

COVERAGE

The 2001 and later small nonroad engines are warranted for two years. If any emission related part on you engine (as listed above) is defective, the part will be repaired or replaced by Jonsered.

OWNER′S WARRANTY RESPONSIBILITIES

As the small nonroad engine owner, you are responsible for the performance of the required maintenance listed in your Operator′s Manual. Jonsered recommends that you retain all receipts covering maintenance on your small nonroad engine, but Jonsered cannot deny warranty solely for the lack of receipts or for your failure to ensure the performance of all scheduled maintenance. As the small nonroad engine owner, you should, however, be aware that Jonsered may deny you warranty coverage if your small nonroad engine or a part of it has failed due to abuse, neglect, improper maintenance, unapproved modifications or the use of parts not made or approved by the original equipment manufacturer. You are responsible for presenting your small nonroad engine to a Jonsered authorized servicing dealer as soon as a problem exists. The warranty repairs should be completed in a reasonable amount of time, not to exceed 30 days. If you have any questions regarding your warranty rights and responsibilities, you should contact your nearest authorized servicing dealer or call Jonsered, at Sweden +46-36-146500.

WARRANTY COMMENCEMENT DATE

The warranty period begins on the date small nonroad engine is delivered.

LENGTH OF COVERAGE

Jonsered warrants to the initial owner and each subsequent purchaser that the engine is free from defects in materials and workmanship which cause the failure of a warranted part for a period of two years.

WHAT IS COVERED

REPAIR OR REPLACEMENT OF PARTS Repair or replacement of any warranted part will be performed at no charge to the owner at an approved Jonsered servicing dealer. If you have any questions regarding your warranty

rights and responsibilities, you should contact your nearest authorized servicing dealer or call Jonsered, at Sweden +46- 36-146500.

WARRANTY PERIOD Any warranted part which is not scheduled for replacement as required maintenance, or which is scheduled only for regular inspection to the effect of “repair or replace as necessary” shall be warranted for 2 years. Any warranted part which is scheduled for replacement as required maintenance shall be warranted for the period of time up to the first scheduled replacement point for that part.

DIAGNOSIS The owner shall not be charged for diagnostic labor which leads to the determination that a warranted part is defective, if the diagnostic work is performed at an approved Jonsered servicing dealer.

CONSEQUENTIAL DAMAGES Jonsered may be liable for damages to other engine components caused by the failure of a warranted part still under warranty.

WHAT IS NOT COVERED

All failures caused by abuse, neglect or improper maintenance are not covered.

ADD -ON OR MODIFIED PARTS

The use of add-on or modified parts can be grounds for disallowing a warranty claim. Jonsered is not liable to cover failures of warranted parts caused by the use of add-on or modified parts.

HOW TO FILE A CLAIM

If you have any questions regarding your warranty rights and responsibilities, you should contact your nearest authorized servicing dealer or call Jonsered, at Sweden +46-36-146500.

WHERE TO GET WARRANTY SERVICE

Warranty services or repairs shall be provided at all Jonsered authorized servicing dealers.

MAINTENANCE, REPLACEMENT AND REPAIR OF EMISSION-RELATED PARTS

Any Jonsered approved replacement part used in the performance of any warranty maintenance or repairs on emission-related parts, will be provided without charge to the owner if the part is under warranty.

EMISSION CONTROL WARRANTY PARTS LIST

1Carburetor and internal parts

2Intake pipe, airfilter holder and carburetor bolts.

3Airfilter and fuelfilter covered up to maintenance schedule.

4Ignition System

1 Spark Plug, covered up to maintenance schedule

2 Ignition Module

MAINTENANCE STATEMENT

The owner is responsible for the performance of all required maintenance, as defined in the operator’s manual.

English – 31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Operator’s manual EPA Symbols KEY to SymbolsContents Dear customer IntroductionWhat is what on the clearing saw? RS44 What is WHAT?What is what on the clearing saw? RS52 Personal protective equipment General Safety PrecautionsStop switch Machine′s safety equipmentThrottle lockout Muffler Cutting attachment guardVibration damping system Quick releaseLocking screw Locking nutCutting equipment Cutting equipmentSharpening the saw blade Sharpening grass cutters and grass bladesTrimmer head Assembling the cutting equipment AssemblyAssembling the handlebar and throttle Transport position, handlebarFitting the trimmer guard and trimmer head Trimmy SII Fitting the blade guard and saw bladeFitting other guards and cutting attachments Adjusting the harness and clearing sawStandard harness Vector harness Adjusting the harnessCorrect balance Fuel Handling Fuel safetyFuel Mixing FuelingCold engine Starting and StoppingCheck before starting Starting and stoppingStopping StartingABC of clearing Basic safety rulesWorking Techniques General working instructionsWorking methods Forestry clearing using a saw bladeBrush cutting with a saw blade Grass clearing using a grass bladeTrimming Grass trimming with a trimmer headCarburetor MaintenanceHigh speed jet H RS52 Fine adjustment of the idle speed TLow speed jet L High speed jet H GR41, GR50, RS44Cooling system Correctly adjusted carburetorCleaning the air filter MufflerSpark plug Bevel gearMaintenance Daily Weekly Monthly Maintenance scheduleTechnical data Technical DataYour Warranty Rights and Obligations Federal Emission Control Warranty StatementTrimmy SII Page ´z+R¶5Q¨ Page 1150269-95 ´z+R¶5Q¨ ´z+R¶5Q¨

RS52 specifications

The Jonsered RS52 is a robust and high-performance chainsaw renowned for its blend of power and user-friendly design, making it an ideal choice for both professional lumberjacks and serious DIY enthusiasts. This versatile tool is engineered to tackle a range of forestry tasks, from felling trees to trimming branches and preparing firewood.

One of the main features of the RS52 is its powerful engine. The chainsaw is equipped with a 52cc two-stroke engine that delivers impressive performance, enabling it to handle larger logs with ease. This power ensures efficiency and speed during cutting operations, allowing users to complete their tasks in less time. Despite its powerful engine, the RS52 is designed to minimize fuel consumption, making it an eco-friendly option for users who are conscious about their environmental impact.

In terms of technology, the Jonsered RS52 boasts a well-designed air injection system that helps to keep the air filter cleaner for longer durations. This innovation not only extends the life of the filter but also maintains engine performance by ensuring a steady supply of clean air. Additionally, this chainsaw features an easy start mechanism, reducing the effort needed to start the engine and making it user-friendly for individuals of all skill levels.

Safety is a paramount consideration in the design of the RS52. The chainsaw incorporates a chain brake system that allows for quick stopping in the event of kickback, significantly enhancing user safety. Furthermore, the ergonomic design of the handle promotes comfort during use, reducing fatigue even during prolonged cutting sessions.

The RS52 is equipped with a durable chain and bar, designed for optimal cutting performance and longevity. The chain tensioning system allows for straightforward adjustments, ensuring that the chain remains taut and functioning properly.

Overall, the Jonsered RS52 chainsaw is a powerful and efficient tool that combines advanced technology with user-centric features. Its robust performance, safety mechanisms, and ease of use make it a preferred choice for professionals and hobbyists alike, proving its worth in various cutting tasks. Whether you are a seasoned professional or a weekend woodworker, the RS52 is engineered to deliver reliability and exceptional results in every operation.
Top Page Image Contents