Marantz SR7400 Surround Mode, Temporarily Turning OFF Sound, Using the Sleep Timer, Dolby Digital

Page 26
NIGHT MODE
The sleep time will be shown for a few seconds in the display on the front panel, and it will count down until the time has elapsed.
When the programmed sleep time has elapsed, the unit will automatically turn off.
Note that the SLEEP indicator on the display will illuminate when the Sleep function is programmed. To cancel the Sleep function, press the SLEEP button until the display shows “SLEEP OFF” and the SLEEP indicator will disappear.
To program the SR7400 for automatic standby, press tne SLEEP button on the remote.
Each press of the button will increase the time before shut down in the following sequence.

(Using the remote control unit)

To adjust the tone, press the AMP button and press the > button PAGE3 is displayed.

To adjust the bass effect, press BASS+ (D2) or BASS– (D3).

To adjust the treble effect, TREB+ (D4) or TREB–

(D5).

Notes :

•The tone control function can work in the AUTO Surround, Stereo, Dolby Pro Logic IIx , DTS, DTS-ES, and Multi Ch. Stereo mode.

TEMPORARILY TURNING OFF THE

SOUND

VOLUME

 

 

 

 

 

OK

 

F/P

MODE

DOWN

 

UP

 

 

 

 

 

MUTE

PREV

 

MUTE

 

 

 

 

 

TAPE

CD

TUNER

 

 

GUIDE

 

 

 

 

AUX1 INPUT

MENU

 

EXIT

 

 

 

 

 

 

 

 

 

TEST

CH.SEL

SURR

 

 

 

 

1

2

3

 

 

 

 

7.1CH

ATT

SPK-AB

 

 

 

 

4

5

6

 

 

 

 

DISP

OSD

SLEEP

7 8 9

USING THE SLEEP TIMER

PREV

 

MUTE

 

GUIDE

 

MENU

 

EXIT

TEST

CH.SEL

SURR

1

2

3

7.1CH

ATT

SPK-AB

4

5

6

DISP

OSD

SLEEP

7

8

9

CLEAR

0

MEMO

OFF 10 20 30

90 80 70 60

SURROUND MODE

The SR7400 is equipped with many surround modes. These are provided to reproduce a variety of surround sound effects, according to the content of the source to be played.

The available surround modes may be restricted depending on the input signal and speaker setup.

AUTO

When this mode is selected, the receiver determines whether the digital input signal is Dolby Digital, Dolby Digital Surround EX, DTS, DTS-ES, DTS 96/ 24 or PCM-audio.

Surround EX & DTS-ES will operate for multichannel source that has a Dolby Digital Surround EX or DTS-

40ES auto trigger flag in the digital signal.

When a Dolby Digital or DTS signal is input, the

50number of channels for which the corresponding signal is encoded will be played.

Inputting a Dolby Digital two channel signal with Dolby surround status automatically subjects that signal to Pro Logic IIx movie processing before play.

PCM 96 kHz source material can be played in this mode.

Notes:

Dolby Pro Logic IIx brings the excitement of

ENGLISH

Pro Logic IIx MOVIE

surround sound to any stereo mix, while making

 

existing Dolby Surround mixes sound more like

 

discrete 5.1 channels Surround sound.

 

Dolby Pro Logic IIx has 3 modes. Please see below.

 

This mode provides 6.1 or 7.1 channel surround

 

 

sound from Dolby Surround encoded stereo movie

 

sound tracks.

 

Pro Logic IIx MUSIC

 

This mode provides 6.1 or 7.1 channel surround

 

sound from conventional stereo sources, analog or

 

digital, such as CD, Tape, FM, TV, Stereo VCR,

 

etc.

 

Pro Logic IIx GAME

 

Game mode restores the impact low-frequency

 

surround effects by routing them to the system’s

 

subwoofer.

 

Pro Logic

 

This mode emulated original Dolby Pro Logic

 

decoding (3/1 surround) suit for Dolby Surround

 

encoded stereo movie soundtracks.

 

Notes:

• Pro Logic IIx mode will decode as Pro Logic II

mode when the SURROUND BACK SPEAKER is

set NONE in SPEAKER SETUP menu. (See

SPEAKER SETUP, page 18)

• Pro Logic IIx mode is available for a 2ch input

signal which is encoded in Dolby Digital or PCM

To temporarily silence all speaker outputs such as when interrupted by a phone call, press the MUTE button on the front panel or MUTE button on the remote.

This will interrupt the output to all speakers and the head-phone jack, but it will not affect any recording or dubbing that may be in progress.

When the system is muted, the display will show “MUTE” .

Press the MUTE button again to return to normal operation.

M

D1

D2

D3

D4

PAGE3

D5

TUNER CD CD-R MD

TAPE AUX1 AUX2 AMP

LIGHT

12

RC1400

Learning Remote Controller

To select the NIGHT mode, press the AMP button and press the > button until PAGE3 is displayed. Press the NIGHT (D1) button.

Selecting the Night Mode ON is effective in Dolby Digital only, and it compresses the dynamic range. This softens loud passages such as sudden explosions, to help prevent disturbing others late at night.

To turn off the Night mode, press the NIGHT button again.

•When you use this mode with certain DVD and CD players, performing operations such as “Skip” or “Stop” may momentarily interrupt the output.

•When the signal is not decoded, the mode is changed to AUTO mode automatically. Refer to page 22 to confirm the available decoding mode.

2MODE

(Dolby Digital, Pro Logic IIx MOVIE, Pro Logic IIx MUSIC, Pro Logic IIx GAME Pro Logic)

This mode is used with source materials encoded in Dolby Digital and Dolby Surround.

DOLBY DIGITAL

This mode is enabled when playing source materials encoded in Dolby Digital.

Playing multichannel encoded 6.1 or 7.1-channel Dolby Digital sources provides five main audio channels (left, center, right, surround left and surround right) and Low Frequency Effect channel. Dolby Digital EX decoding is not available in this mode.

format.

• PCM-audio signals can be subjected to Pro Logic

processing when the sampling frequency is 32

kHz, 44.1 kHz or 48 kHz.

EX/ES

This mode provides 6.1 channel surround for DOLBY DIGITAL EX, DTS-ES encoded source material such as DVD.

This mode cannot be used when an analog input has been selected.

Dolby Digital EX

In a movie theater, film soundtracks that have been encoded with Dolby Digital surround EX technology are able to reproduce an extra channel which has been added during the mixing of the program.

This channel, called Surround Back, places sounds behind the listener in addition to the currently available front left, front center, front right, surround right, surround left and subwoofer channels.

This additional channel provides the opportunity for more detailed imaging behind the listener and brings more depth, spacious ambience and sound localization than ever before.

Dolby Digital EX is not available in the system without surround back speaker(s).

23

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Model SR7400 User Guide Cloth for cleaning Outlet before cleaning. Do not use liquidCleaners or aerosol cleaners. Use a damp Product may fall, causing serious injury toLightning and power-line surges Power-Cord Protection Power-supply cordsProduct during a lightning storm, or when it is Power Lines An outside antenna systemTable of Contents Description PrecautionsIntroduction About Dolby Pro LogicRemote Controller RC1400 FeaturesAccessories Input Function Selector FL Display PCMRear Panel SBR, CAudio IN/OUT CD, TAPE, CD-R, TV, DVD, VCR1, DSS/VCR2 When AMP mode is selectedNames and Functions Digital Input Dig.1 6 / Output coaxial, opticalLCD Indicators Safety Precautions for Batteries Remote Control RangeBattery Replacement Interval Loading BatteriesSetting the Time General Information of RC1400Connections Speaker PlacementConnecting Speakers Tighten the knob by turning clockwise and then Connecting Audio ComponentsBanana plug connections are also possible Insert the banana plugVideo jack Connecting Video ComponentsThere are 3 types of video jacks on the rear panel Component jackSacd Multi Channel Player Connecting Multi Channel Audio SourceConnecting AN External Power Amplifier MD DeckConnecting the Antenna Terminals Connecting the supplied AM loop antennaMultiroom On Screen Display Menu System SetupSelect the AMP mode on the remote control Small Speaker SetupLarge YESPreference CS II Circle Surround Parameter SurroundPL II PRO Logic II Music Parameter Multi RoomTo set on or OFF, press or cursor button DC Trigger SetupCH Input Level Video Convert Selecting the Surround ModeAdjusting the Tone Bass Treble Control Selecting AN Input SourceTemporarily Turning OFF Sound Surround ModeUsing the Sleep Timer Dolby DigitalNeo6 Cinema, Neo6 Music DTS-ES Discrete 6.1, MatrixDts, Neo6 Cinema, Neo6 Music SBL Other Function CH Input Recording AN Analog SourceSpeaker A/B HT-EQBasic Operation Tuner Preset MemoryUsing the SR7400 Using the remote control unit Listening to the Tuner→ B → C ... Z → 1 → 2 → 3 .... → → + → / → Blank → a ← DownMulti Room Multi Room Playback Using Multi Speaker TerminalsMulti Room Playback Using SystemControlling Marantz Components Remote Controller OperationControlling a Marantz VCR VCR Mode Turns the CD recorder on and off Basic Operation When operating non-Marantz AV equipment productsThis example shows how to set a DVD player Normal operation statusControl will transmit either the Marantz preset This remote control is capable of learningStoring codes used by other remote controls that Codes from the initial settings, or remote codesErasing buttons Erasing direct buttonsProgramming Macros Space Press the 5 numeric button to select MPress Cursor button to next Or cursor buttons to move toTransmitting remote control Clone ModeReceiving remote control Interval time SetupMore Troubleshooting Symptom Cause RemedyMemory backup General MalfunctionTechnical Specifications Dimensions Setup Codes Tape Deck Iii VCR DVD Functions R E C T B U T T O NIs a registered trademark
Related manuals
Manual 52 pages 11.83 Kb

SR7400 specifications

The Marantz SR7400 is a distinguished audio receiver designed to provide an excellent home theater experience. Launched in the early 2000s, the SR7400 has maintained its reputation as a premium choice for audiophiles and home cinema enthusiasts due to its robust build and extensive feature set.

One of the main highlights of the SR7400 is its 7.1-channel amplification, capable of delivering a powerful and engaging sound experience. Rated at 90 watts per channel, it ensures ample output for most home environments, making it suitable for both movies and music alike. The receiver supports a variety of surround sound formats, including Dolby Digital, DTS, and Pro Logic II, enabling users to enjoy dynamic audio from their favorite media.

The SR7400 is equipped with advanced circuitry, including Marantz's proprietary HDAM (Hyper Dynamic Amplification Module) technology. This innovation enhances audio performance by minimizing distortion and improving signal clarity. The design emphasizes a high current capability, providing a lively and detailed sound stage, essential for engrossing home theater experiences.

Another significant feature is the SR7400's multi-room capability, allowing different audio sources to be played in separate zones of the house. This flexibility makes it ideal for larger homes where the desire for sound in multiple rooms is a common preference.

In terms of connectivity, the receiver boasts a comprehensive array of inputs and outputs, including multiple HDMI inputs, digital coaxial and optical connections, as well as traditional analog inputs. This versatility allows for seamless integration with various audio and video components, such as DVD players, gaming consoles, and streaming devices.

Additionally, the SR7400 supports the Audyssey MultEQ, an automatic calibration system that optimizes the audio settings based on the room's acoustics. This feature ensures that listeners experience balanced sound regardless of their positioning within the space.

In conclusion, the Marantz SR7400 combines cutting-edge technology with user-friendly features, making it a remarkable choice for anyone looking to enhance their home audio experience. With its powerful amplification, advanced audio processing capabilities, and versatile connectivity options, it remains a sought-after receiver for a truly immersive sound experience.
Top Page Image Contents