Marantz SR7400 manual Erasing buttons, Erasing direct buttons

2.	Press the D3 (NAME) direct button .
3.	Press the DVD source button .
	The NAME indicator blinks.
	The “ ” blinks to indicate that the letter can be
4.	changed.
	Press the cursor button twice.
	The D in DVD blinks to indicate that the letter can
5.	be changed.
	Press the 1 numeric button to select A.

Each time the numeric buttons are pressed, the button cycles through the alphanumeric characters shown below.

1:A → B → C → 1 → A

2:D → E → F → 2 → D

3:G → H → I → 3 → G

4:J → K → L → 4 → J

5:M → N → O → 5 → M

6:P → Q → R → 6 → P

7:S → T → U → 7 → S

8:V → W → X → 8 → V

9:Y → Z → / → 9 → Y

0:SPACE ( ) → + → — → , → ’ → < → > → ? →

0 → SPACE ( )

6. Press the or cursor button .

The letter is changed to “A”.

• The and cursor buttons can be used to

move the blinking indicator of the section

to be rewritten.

ERASING PROGRAMMED CODES (RETURNING TO

INITIAL SETTINGS)

Codes can be erased in five ways: by buttons, direct buttons, direct button pages, sources, and by all memory contents.

Erasing Buttons and Erasing Direct Buttons

This example shows how to erase the code learned from the PLAY button of the DVD player and the AUTO code of the AMP direct button.

Erasing buttons
1	3	4
	LEARN	LEARN
USEPAGE 1	USEPAGE 1 2	USE	PAGE 1 2

1. Hold down the M button for three seconds or more.

The menu is displayed.

2. Press the D5 (ERASE) direct button .

3. Press the DVD source button .

The USE and LEARN indicators blink.

4. Press the button ( : PLAY) that you want to erase while holding down the CLEAR button .

A message is displayed on the LCD.

6. Press the AMP source button .

7. Press the > button to display the first page for AMP.

8. Press the D1 (AUTO) direct button to be erased while holding down the CLEAR button

.

9. Press the D4 (YES) direct button to erase.

The code programmed to the AUTO button is erased.

When the code is cleared, the code for this button resets to the factory default code or becomes blank. The rewritten name returns to the original name.

•To cancel the erasing operation, press the D5 (NO) button to return to the previous screen.

10.When the erasing operation is finished, press the M button .

The USE indicator displays to indicate that the remote control can now be operated.

Erasing Direct Button Pages

This example shows how to erase the entire direct button second page learned from the DVD player.

1 3 4

All codes and names programmed to page 2 are				ENGLISH
erased. When the codes are cleared, the codes for
this button reset to the factory default code or
become blank. Any rewritten names return to the
original name.
• To cancel the erasing operation, press the
D5 (NO) button to return to the previous
screen.
7. When the erasing operation is finished, press
the M button .
The USE	indicator lights up to indicate that the
remote control can now be operated.
Erasing Sources
This procedure clears all codes and names
programmed to the DVD, TV, or other sources. All
codes and names in the four direct button pages
are also erased.
This example shows how to erase the names and
codes learned from the DVD player.
1	3		4
		LEARN	LEARN
USEPAGE 1		USEPAGE 1 2	USEPAGE 1 2

7.	Press the or cursor buttons to select
	AUDIO on the direct button indicator. The A
	flashes to indicate that the name can be
8.	changed.
	Press the 7 numeric button to select S.
	Each time the button is pressed, the button cycles
	through S → T → U → 7 → S.

9.	Press the cursor button to move the flashing
10.	section.
	Press the 5 numeric button to select O.
11.	Follow the same procedure to enter U, N, and
12.	D.
	When finished entering the text, press the OK

5. Press the D4 (YES) direct button to erase.

The code programmed to the ( :PLAY) button is erased.

When the code is cleared, the code for this button resets to the factory default code or becomes blank.

• To cancel the erasing operation, press the

D5 (NO) button to return to the previous

display.

To erase codes programmed for the

CLEAR button, simply press the CLEAR

button twice.

To erase codes programmed for the

S O U R C E b u t t o n , s i m p l y p r e s s t h e

USE PAGE 1

5

LEARN

USE PAGE 1 2

LEARN

USE PAGE 1 2

LEARN

USE PAGE 1 2

1. Hold down the M button for three seconds or more.

The menu is displayed.

2. Press the D5 (ERASE) direct button .

3. Press the DVD source button .

The USE and LEARN indicators blink.

4. Press the DVD source button while holding down the CLEAR button .

5. Press the D4 (YES) direct button to erase.

All codes and names programmed to the DVD source are erased. When the codes are cleared, the codes for this button reset to the factory default

cursor button .

13. Press the M button .

The USE indicator displays on the LCD, and the newly stored codes can be used.

The input is overwritten, and so the currently displayed text is erased.

Up to six characters can be entered for the direct button indicator.

SOURCE button twice.

Erasing direct buttons
6	8	9
LEARN	LEARN	LEARN
USEPAGE 1 2	USEPAGE 1 2	USE	PAGE 1 2

1. Hold down the M button for three seconds or more.

The menu is displayed.

2. Press the D5 (ERASE) direct button .

3. Press the DVD source button .

The USE and LEARN indicators blink.

4. Press the > button to display the second page.

5. Press the > button while holding down the CLEAR button .

6. Press the D4 (YES) direct button to erase.

code or become blank. Any rewritten names return to the original name.

•To cancel the erasing operation, press the D5 (NO) button to return to the previous display.

6.When the erasing operation is finished, press the M button .

The USE indicator displays to indicate that the remote control can now be operated.

35