Jonsered LM2153CMD Training, II. Preparation, III. Operation, IV. Maintenance and Storage

Page 3

Safe Operation Practices for Pedestrian-Controlled Rotary Lawnmowers

IMPORTANT: This cutting machine is capable of amputating hands and feet and throwing objects. Failure to observe the following safety instructions could result in serious injury or death.

I. Training

Read the instructions carefully. Be familiar with the controls and the proper use of the equipment.

Never allow children or people unfamiliar with the instructions to use the lawnmower. Local regulations may restrict the age of the operator.

Never mow while people, especially children, or pets are nearby.

Keep in mind that the operator or user is responsible for accidents or hazards occurring to other people or their property.

II. Preparation

While mowing, always wear substantial footwear and long trousers. Do not operate the equipment when barefoot or wearing open sandals.

Thoroughly inspect the area where the equipment is to be used and remove all objects which may be thrown by the machine.

WARNING - Petrol is highly fl ammable.

-Store fuel in containers specifi cally designed for this purpose.

-Refuel outdoors only and do not smoke while refu- eling.

-Add fuel before starting the engine. Never remove the cap of the fuel tank or add petrol while the engine is running or when the engine is hot.

-If petrol is spilled, do not attempt to start the engine but move the machine away from the area of spillage and avoid creating any source of ignition until petrol vapors have dissipated.

-Replace all fuel tanks and container caps se- curely.

Replace faulty silencers.

Before using, always visually inspect to see that the blades, blade bolts and cutter assembly are not worn or damaged. Replace worn or damaged blades and bolts in sets to preserve balance.

On multi-bladed machines, take care as rotating one blade can cause other blades to rotate.

III. Operation

Do not operate the engine in a confi ned space where dangerous carbon monoxide fumes can collect.

Mow only in daylight or in good artifi cial light.

Avoid operating the equipment in wet grass, where feasible.

Always be sure of your footing on slopes.

Walk, never run.

For wheeled rotary machines, mow across the face of slopes, never up and down.

Exercise extreme caution when changing direction on slopes.

Do not mow excessively steep slopes.

Use extreme caution when reversing or pulling the lawnmower towards you.

Stop the blade if the lawnmower has to be tilted for transportation when crossing surfaces other than grass, and when transporting the lawnmower to and from the area to be mowed.

Never operate the lawnmower with defective guards, or without safety devices, for example defl ectors and/or grass catchers, in place.

Do not change the engine governor settings or over- speed the engine. Operating the engine at excessive speed may increase the hazard of personal injury.

Disengage all blade and drive clutches before starting the engine.

Start the engine or switch on the motor carefully ac- cording to instructions and with feet well away from the blade.

Do not tilt the lawnmower when starting the engine or switching on the motor, except if the lawnmower has to be tilted for starting. In this case, do not tilt more than absolutely necessary and lift only the part which is away from the operator.

Do not start the engine when standing in front of the discharge chute.

Do not put hands or feet near or under rotating parts. Keep clear of the discharge opening at all times.

Never pick up or carry lawnmower while the engine is running.

Stop the engine and disconnect the spark plug wire:

-before cleaning blockages or unclogging chute;

-before checking, cleaning or working on the lawn- mower;

-after striking a foreign object. Inspect the lawnmower for damage and make repairs before restarting and operating the lawnmower;

-if the lawnmower starts to vibrate abnormally (check immediately).

Stop the engine:

-whenever you leave the lawnmower;

-before refuelling.

Reduce the throttle setting during engine shut down and, if the engine is provided with a shut-off valve, turn the fuel off at the conclusion of mowing.

Go slow when using a trailing seat.

IV. Maintenance and Storage

Keep all nuts, bolts and screws tight to be sure the equipment is in safe working condition.

Never store the equipment with petrol in the tank inside a building where fumes may reach an open fl ame or spark.

Allow the engine to cool before storing in any enclo- sure.

To reduce the fi re hazard, keep the engine, silencer, battery compartment and petrol storage area free of grass, leaves, or excessive grease.

Check the grass catcher frequently for wear or dete- rioration.

Replace worn or damaged parts for safety.

If the fuel tank has to be drained, this should be done outdoors.

3

Image 3
Contents LM2153CMD Contents Indice III. Operation IV. Maintenance and StorageTraining II. PreparationIV. Wartung und Lagerung SchulungII. Vorbereitung III. BetriebIV. Entretien et Entreposage Précautions d’utilisationII. Préparation III. UtilisationIV. Mantenimiento y Almacenamiento InstrucciónII. Preparación III. OperaciónIV. Onderhoud en Opslag Veilig werken met handbediende grasmaaimachinesII. Voorbereiding III. BedieningIV. Manutenzione e Periodi di Inattivita’ Addestramento All’usoII. Preparazione III. FunzionamentoLM2153CMD Page Empuñadura HandleGriff MancheArmado y montaje del colector de hierba To Assemble and Attach Grass CatcherZusammensetzung und Montage des Grasfang- beutels Assemblage et montage du collecteur dherbeVaciado del colector de hierba To Empty Grass CatcherLeeren des Grasfangbeutels Vidage du collecteur dherbePara Convertir la Segadora To Convert MowerUmrüsten des Mäweks Pour Convertir la TondeuseAjuste AdjustmentEinstellung ReglageEst en marche Starting and StoppingStart und Stopp Marche et ArrêtNooit benzinetank vullen terwijl de motor draait Arranque y ParadaStarten en Stoppen Avviamento e ArrestoFuncionamiento Mise en serviceDrive LaufMAX 1/3 Inspeccion MaintenanceWartung EntretienRevisión anual Al terminar la estación Annually After end of seasonJährlich nach Beendigung der Saison Annuellement à fin de la saisonTransporto TransportTransporte VervoerAmendments of the following European ManufacturerHereby declares that the machinery described below Complies with provisions and currentSiguientes directivas europeas El FabricanteCumple con las disposiciones Enmiendas vigentes de las

LM2153CMD specifications

The Jonsered LM2153CMD is a premium lawn mower that stands out for its combination of performance, durability, and user-friendly design. Engineered to provide a pristine mowing experience, it caters to both residential homeowners and professional landscapers who demand efficiency and reliability.

One of the main features of the LM2153CMD is its powerful 150cc engine. This robust engine provides ample power to tackle overgrown grass and tough terrains, ensuring a clean and even cut every time. The model also boasts a self-propelled drive system, which makes maneuvering effortless, allowing users to navigate through their yards without straining themselves. The variable speed control feature provides even more flexibility, enabling operators to adjust the speed according to their walking pace.

The cutting deck measures 53 cm and is constructed from durable steel, offering a sturdy and long-lasting tool to handle various grass conditions. The LM2153CMD offers an adjustable cutting height, with settings that typically range from 25 mm to 75 mm, allowing users to customize their mowing experience based on the type of grass and desired lawn appearance.

In terms of grass collection, the mower comes equipped with a sizable grass catcher, which significantly reduces the frequency of emptying during mowing sessions. The bagger is designed for efficient airflow, facilitating a more effective collection process. Additionally, for those who prefer mulching, the LM2153CMD features a mulching function that finely chops clippings and returns them to the lawn.

Noise reduction technology is another characteristic of this lawn mower, making it quieter in operation than many of its competitors. This is particularly beneficial for early morning or late evening mowing, where noise can be an issue in residential areas.

The ergonomically designed handle is height adjustable and has a soft grip, providing comfort during prolonged use. Furthermore, the LM2153CMD is easy to start, often requiring just a single pull, and its compact design allows for hassle-free storage.

Overall, the Jonsered LM2153CMD is a well-rounded lawn mower that combines power, efficiency, and innovative features, making it an ideal choice for anyone looking to maintain a beautifully manicured lawn with minimal effort. Its reliability and advanced technology set it apart in a crowded market, making it a worthwhile investment for lawn care enthusiasts.