Jonsered CC2036 Bevel gear, Air filter, Spark plug, Cleaning the air filter, Oiling the air filter

Page 30

MAINTENANCE

Bevel gear

The bevel gear is filled with the right amount of grease at the factory. However, before using the machine you should check that the bevel gear is filled 3/4 full with grease. Use JONSERED special grease.

The grease in the bevel gear does not normally need to be changed except if repairs are carried out.

Air filter

The air filter must be regularly cleaned to remove dust and dirt in order to avoid:

•Carburettor malfunctions

•Starting problems

•Loss of engine power

•Unnecessary wear to engine parts

•Excessive fuel consumption.

Clean the filter every 25 hours, or more regularly if conditions are exceptionally dusty.

Cleaning the air filter

Remove the air filter cover and take out the filter. Wash it clean in warm, soapy water. Ensure that the filter is dry before refitting it.

An air filter that has been in use for a long time cannot be cleaned completely. The filter must therefore be replaced with a new one at regular intervals. A damaged air filter

must always be replaced.

If the machine is used in dusty conditions the air filter should be soaked in oil. See instructions under the heading Oiling the air filter.

30 – English

Oiling the air filter

Always use special filter oil. Filter oil contains a solvent to make it spread evenly through the filter. You should therefore avoid skin contact.

Put the filter in a plastic bag and pour the filter oil over it. Knead the plastic bag to distribute the oil. Squeeze the excess oil out of the filter inside the plastic bag and pour off the excess before fitting the filter to the machine. Never use common engine oil. This would drain through the filter quite quickly and collect in the bottom.

Spark plug

The spark plug condition is influenced by:

•Incorrect carburetor adjustment.

•An incorrect fuel mixture (too much or incorrect type of oil).

•A dirty air filter.

These factors cause deposits on the spark plug electrodes, which may result in operating problems and starting difficulties.

If the machine is low on power, difficult to start or runs poorly at idle speed: always check the spark plug first before taking any further action. If the spark plug is dirty, clean it and check that the electrode gap is 0.020 inch (0.5 mm). The spark plug should be replaced after about a month in operation or earlier if necessary.

CAUTION! Always use the recommended spark plug type! Use of the wrong spark plug can damage the piston/ cylinder. Check that the spark plug is fitted with a suppressor.

Note: Use only JONSERED replacement parts. Use of other brands of replacement parts can cause damage to your unit or injury to the operator or others. Your warranty does not cover damage or liability caused by the use of accessories and/or attachments not specifically recommended by JONSERED.

Page 29 Page 31
Image 30
Page 29 Page 31
Contents GR2036 Operator of the machine must Ensure, while working, that no KEY to SymbolsSymbols Persons or animals come closer thanContents Introduction Dear customerWhat is WHAT? What is what?General Safety Precautions Personal protective equipmentMachine′s safety equipment Throttle lockoutVibration damping system Stop switchCutting attachment guard Quick releaseMuffler Locking nutCutting equipment Cutting equipmentGeneral rules Sharpening grass cutters and grass blades Sharpening the saw bladeTrimmer head Assembly Fitting the handlebarTransport position, handlebar Fitting blades and trimmer heads Fitting a blade guard, grass blade and grass cutterFitting the blade guard and saw blade Fitting the trimmer guard and trimmer head Trimmy SII AM LAdjusting the harness and clearing saw Fitting other guards and cutting attachmentsSpreading the load on your shoulders Forestry clearing Correct heightCorrect balance Grass clearingFuel safety Fuel HandlingFuel Fueling MixingStarting and stopping Starting and StoppingCheck before starting Cold engineFor throttle handles with a start throttle lock Warm engineStarting StoppingBasic safety rules Working TechniquesGeneral working instructions ABC of clearing Forestry clearing using a saw blade Grass trimming with a trimmer head Grass clearing using a grass bladeBrush cutting with a saw blade TrimmingCutting SweepingMaintenance CarburetorAdjusting the start throttle speed Fine adjustment of the idle speed TCorrectly adjusted carburetor Low speed jet LMuffler Cooling systemRemember the risk of fire Air filter Cleaning the air filterBevel gear Spark plugMaintenance schedule Maintenance Daily Weekly MonthlyTechnical Data Technical dataApproved accessories Type Cutting attachment guard, Art. no Federal Emission Control Warranty Statement Your Warranty Rights and ObligationsEmission Control Warranty Parts List Poly Trim Tap n’ Go 35 Spin Tap n’Go 45 Spin Trimmy SII Page Page Page Page 1151201-95

CC2036 specifications

The Jonsered CC2036 is a powerful and efficient chainsaw designed for both professional users and homeowners looking to tackle demanding cutting tasks. Equipped with a robust 36cc engine, the CC2036 offers an impressive balance between performance and ease of use. This model is particularly favored for its lightweight design, making it an ideal choice for extended operational periods without causing fatigue.

One of the standout features of the Jonsered CC2036 is its Easy Start technology. This innovative system significantly reduces the effort required to start the engine. With just a few simple pulls, users can get the chainsaw running smoothly, making it accessible for operators of all skill levels. This technology is especially beneficial for those who may struggle with traditional starting methods.

Additionally, the CC2036 incorporates a tool-less chain tensioning system, which allows users to adjust the chain tension quickly and efficiently without the need for additional tools. This feature enhances convenience, ensuring that the chainsaw is always in optimal working condition, which is crucial for safety and performance during cutting tasks.

Another notable characteristic of the Jonsered CC2036 is its low-vibration design. This feature minimizes user fatigue and enhances comfort during prolonged use, making it suitable for tasks that require precision and stamina. The anti-vibration technology reduces the shock transmitted to the user’s hands, allowing for a more controlled and stable cutting experience.

In terms of safety, the CC2036 is equipped with a chain brake that provides instant stopping of the chain in the event of kickback, offering peace of mind to the operator. Furthermore, the chainsaw is designed with an ergonomic handle that provides a secure grip, enhancing control and maneuverability.

Fuel efficiency is another highlight of the Jonsered CC2036. Its advanced engine technology not only delivers powerful performance but also ensures lower emissions, making it an environmentally friendly choice. This blend of efficiency and power ensures that users can operate the chainsaw for extended periods without frequent refueling.

Overall, the Jonsered CC2036 is engineered for reliability and performance, making it a versatile tool for a variety of cutting applications, whether for landscaping, firewood processing, or tree maintenance. With its user-friendly features, safety mechanisms, and powerful engine, the CC2036 stands out as an excellent option for those seeking a dependable chainsaw.
Top Page Image Contents