Jonsered cs 2159 manual What is WHAT?, What is what?

Page 24

WHAT IS WHAT?

What is what?

1.Cylinder cover.

2.Front handle.

3.Front hand guard.

4.Starter cover.

5.Chain oil tank.

6.Starter handle.

7.Adjuster screw, carburetor.

8.Choke control/Start throttle lock.

9.Rear handle.

10.Stop switch. Ignition on/off switch.

11.Fuel tank.

12.Muffler.

13.Bar tip sprocket.

14.Saw chain.

15.Saw bar.

16.Bumper.

17.Chain catcher. Catches chain if it jumps or breaks.

18.Clutch cover.

19.Right hand guard. Protects right hand if chain breaks or jumps.

20.Throttle control.

21.Throttle lock. Prevents accidental operation of throttle control.

22.Decompression valve.

23.Combination spanner.

24.Chain tensioning screw.

25.Operator´s manual.

26.Bar guard.

27.Oil pump adjustment screw.

28.Switch for heated handles (CS 2159 W).

24 – English

Image 24

Contents Operator´s manual EPAKEY to Symbols SymbolsContents Safety Instructions Personal Protective EquipmentChain brake and front hand guard 3a StartingThrottle lock Chain catcherRight hand guard Stop switch Vibration damping systemMuffler Checking brake band wear Checking the front hand guardChecking the inertia brake release Checking the brake triggerThrottle lock Cutting Equipment 5 basic rulesCutting equipment designed to minimise kickback BarSaw chain Some terms that describe the bar and chainSharpening your chain and adjusting raker clearance General information on sharpening cutting teethSharpening cutting teeth Risk of kickback is increased with a badly sharpened chainGeneral advice on setting raker clearance Setting the raker clearanceTensioning the chain Lubricating cutting equipment Chain oilFilling with chain oil Never use waste oilNeedle bearing maintenance Checking chain lubricationChecking wear on cutting equipment Lubricating the bar tip sprocketHOW to Avoid Kickback What is kickback?General rules Do not let go of the handlesNever use the saw one- handed Min m 10 ftBasic safety rules General Working InstructionsBasic cutting technique GeneralTerms CuttingTree felling technique Safe distanceLimbing Felling directionClearing the trunk and preparing your retreat FellingGeneral advice Freeing a tree that has fallen badly = high accident riskCutting the trunk into logs Freeing a Trapped treeWhat is WHAT? What is what?Assembly Mounting guide bar and chainFuel Handling FuelmixFuelling Chain oilMin 3 m 10ftStart and Stop Start and stopStart StopMaintenance CarburetorStarter device assembly Starter deviceChanging a broken or worn starter cord Tensioning the recoil springNeedle bearing maintenance Spark plug Air filterMuffler IMPORTANT! a damaged air filter must always be replacedAdjustment of the oil pump Heated handles CS 2159 W Centrifugal cleaningCooling system Winter useWeekly maintenance Daily maintenance Monthly maintenanceTechnical Data Emission Control Warranty Statement + 46 36 14 65 00. Warranty Period+ 46 36 14 65 108 88 2002W43