Jonsered CS 2139T manual Cutting equipment, Muffler, General rules

Page 10

GENERAL SAFETY PRECAUTIONS

Muffler

The muffler is designed to keep noise levels to a minimum and to direct exhaust fumes away from the user.

WARNING! The exhaust fumes from the

!engine are hot and may contain sparks which can start a fire. Never start the machine indoors or near combustible material!

In areas with a hot, dry climate there is a high risk of fires. These areas are sometimes subject to government rules requiring among other things the muffler must be equipped with an approved type of spark arrestor mesh.

CAUTION! The muffler gets very hot during and after use. This also applies during idling. Be aware of the fire hazard, especially when working near flammable substances and/ or vapours.

WARNING! Never use a saw without a

!muffler, or with a damaged muffler. A damaged muffler may substantially increase the noise level and the fire hazard. Keep fire fighting equipment handy. If a spark arrestor screen is required in your area, never use the saw without or with a broken spark arrestor screen.

Cutting equipment

This section describes how to choose and maintain your cutting equipment in order to:

•Reduce the risk of kickback.

•Reduce the risk of the saw chain breaking or jumping off the bar.

•Obtain optimal cutting performance.

•Extend the life of cutting equipment.

•Avoid increasing vibration levels.

General rules

•Only use cutting equipment recommended by us! See instructions under the heading Technical data.

•Keep the chain’s cutting teeth properly sharpened! Follow our instructions and use the recommended file gauge. A damaged or badly sharpened chain increases the risk of accidents.

•Maintain the correct depth gauge setting! Follow our instructions and use the recommended depth gauge clearance. Too large a clearance increases the risk of kickback.

•Keep the chain properly tensioned! If the chain is slack it is more likely to jump off and lead to increased wear on the bar, chain and drive sprocket.

•Keep cutting equipment well lubricated and properly maintained! A poorly lubricated chain is more likely to break and lead to increased wear on the bar, chain and drive sprocket.

Cutting equipment designed to reduce kickback

WARNING! Faulty cutting equipment or the

!wrong combination of bar and saw chain increases the risk of kickback! Only use the bar/saw chain combinations we recommend, and follow the filing instructions. See instructions under the heading Technical data.

The only way to avoid kickback is to make sure that the kickback zone of the bar never touches anything.

By using cutting equipment with ”built-in” kickback reduction and keeping the chain sharp and well-maintained you can reduce the effects of kickback.

Bar

The smaller the tip radius the lower the chance of kickback.

Chain

A chain is made up of a number of links, which are available in standard and low-kickback versions.

IMPORTANT! No saw chain design eliminates the danger of kickback.

10 – English

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Operator′s manual Symbols on the machine KEY to SymbolsSymbols in the operator’s manual Contents Introduction Dear CustomerWhat is WHAT? What is what on the chain saw?Before using a new chain saw General Safety PrecautionsAlways use common sense Personal protective equipment Machine′s safety equipmentChain brake and front hand guard General Safety Precautions Chain catcher Stop switchThrottle lockout Vibration damping systemGeneral rules Cutting equipmentMuffler Cutting equipment designed to reduce kickbackSome terms that describe the bar and chain Sharpening your chain and adjusting depth gauge settingGeneral information on sharpening cutting teeth Tensioning the chain General advice on adjusting depth gauge settingAdjustment of depth gauge setting Sharpening cutting teethFilling with chain oil Lubricating cutting equipmentChain oil Checking chain lubricationChain drive sprocket Checking wear on cutting equipmentFitting the bar and chain AssemblyFitting a spike bumper Fuel Handling FuelTransport and storage Fuel safetyFuelling Long-term storageCold engine Starting and StoppingStarting and stopping Warm engineStopping Before use Basic safety rulesWorking Techniques General working instructionsGeneral rules General Basic cutting techniqueTerms Limbing Felling technique for tree topsCutting Safe distanceFelling Directional cutsFreeing a tree that has fallen badly General adviceCutting trees and branches that are in tension What is kickback? How to avoid kickbackCutting the trunk into logs Carburettor adjustment MaintenanceGeneral Checking the front hand guard Correctly adjusted carburettorChecking brake band wear Checking the brake triggerMuffler Tensioning the recoil spring StarterChanging a broken or worn starter cord Changing a broken recoil springSpark plug Air filterLubricating the bar tip sprocket Adjustment of the oil pump Cooling systemMaintenance schedule Daily maintenance Weekly maintenance Monthly maintenanceTechnical Data Technical dataSaw chain filing and file gauges EC-declaration of conformity Bar and chain combinationsApplies to Europe only 1150867-26 ´z+Rvh¶6¨ ´z+Rvh¶6¨

CS 2139T specifications

The Jonsered CS 2139T is a robust chainsaw designed for both professional and semi-professional users seeking reliability, power, and ease of use. This model is perfect for tree care, firewood cutting, and other demanding tasks in forestry and landscaping.

One of the standout features of the CS 2139T is its powerful 39cc 2-stroke engine, which delivers impressive performance while maintaining fuel efficiency. This engine is designed for a quick start, thanks to its efficient ignition system, reducing the time users spend trying to get the saw running. The power-to-weight ratio is favorable, making it suitable for extended use without causing fatigue.

The chainsaw incorporates advanced technology such as the Clean Power engine, which minimizes harmful emissions while maximizing fuel efficiency. This is particularly beneficial for environmentally conscious users and complies with stringent emission regulations. The CS 2139T also features an Anti-Vibration system, which significantly reduces vibrations felt by the operator, enhancing comfort and control, especially during prolonged use.

Safety is a priority with the CS 2139T, featuring a chain brake that engages automatically in the event of kickback, ensuring that the user is protected from potential accidents. Additionally, the saw is equipped with a throttle lock that prevents accidental engagement, providing extra peace of mind.

The ergonomic design of the handle and controls has been thoughtfully engineered for ease of use, allowing operators to maneuver the chainsaw with confidence. The unique air filtration system enhances the longevity of the engine by preventing dust and debris from entering, resulting in less frequent maintenance and longer operating life.

The chainsaw also boasts a durable construction, with robust materials that withstand the rigors of cutting hard wood and facing varying weather conditions. A tool-free chain tensioning system allows for quick and easy adjustments, ensuring that users can maximize performance without wasting time.

In summary, the Jonsered CS 2139T is a reliable choice for demanding users who require a combination of power, efficiency, and safety. With its advanced technologies and thoughtful design features, it stands out as an exceptional tool in the world of chainsaws.
Top Page Image Contents