Jonsered CS 2139T manual Lubricating cutting equipment, Chain oil, Filling with chain oil

Page 13

GENERAL SAFETY PRECAUTIONS

Tension the chain as tightly as possible, but not so tight that you cannot pull it round freely by hand.

•Undo the bar nuts that hold the clutch cover/chain brake. Use the combination spanner. Then tighten the bar nuts by hand as tight as you can.

•Raise the tip of the bar and stretch the chain by tightening the chain tensioning screw using the combination spanner. Tighten the chain until it does not sag from the underside of the bar.

•Use the combination spanner to tighten the bar nuts while lifting the tip of the bar at the same time. Check that you can pull the chain round freely by hand and that it does not sag from the underside of the bar.

The position of the chain tensioning screw on our chain saws varies from model to model. See instructions under the heading What is what? to find out where it is on your model.

Lubricating cutting equipment

WARNING! Poor lubrication of cutting

!equipment may cause the chain to snap, which could lead to serious, even fatal injuries.

Chain oil

Chain oil must demonstrate good adhesion to the chain and also maintain its flow characteristics regardless of whether it is warm summer or cold winter weather.

As a chain saw manufacturer we have developed an optimal chain oil which, with its vegetable oil base, is also biodegradable. We recommend the use of our own oil for both maximum chain life and to minimise environmental damage. If our own chain oil is not available, standard chain oil is recommended.

Never use waste oil! Using waste oil can be dangerous to you and damage the machine and environment.

IMPORTANT! When using vegetable based saw chain oil, dismantle and clean the groove in the bar and saw chain before long-term storage. Otherwise there is a risk of the saw chain oil oxidizing, which will result in the saw chain becoming stiff and the bar tip sprocket jamming.

Filling with chain oil

•All our chain saws have an automatic chain lubrication system. On some models the oil flow is also adjustable.

•The saw chain oil tank and the fuel tank are designed so that the fuel runs out before the saw chain oil.

However, this safety feature requires that you use the right sort of chain oil (if the oil is too thin it will run out before the fuel), and that you adjust the carburetor as recommended (a lean mixture may mean that the fuel lasts longer than the oil) and that you also use the recommended cutting equipment (a bar that is too long will use more chain oil).

Checking chain lubrication

•Check the chain lubrication each time you refuel. See instructions under the heading Lubricating the bar tip sprocket.

Aim the tip of the bar at a light coloured surface about 20 cm (8 inches) away. After 1 minute running at 3/4 throttle you should see a distinct line of oil on the light surface.

If the chain lubrication is not working:

•Check that the oil channel in the bar is not obstructed. Clean if necessary.

English – 13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Operator′s manual Symbols on the machine KEY to SymbolsSymbols in the operator’s manual Contents Dear Customer IntroductionWhat is what on the chain saw? What is WHAT?Before using a new chain saw General Safety PrecautionsAlways use common sense Personal protective equipment Machine′s safety equipmentChain brake and front hand guard General Safety Precautions Throttle lockout Stop switchChain catcher Vibration damping systemMuffler Cutting equipmentGeneral rules Cutting equipment designed to reduce kickbackSome terms that describe the bar and chain Sharpening your chain and adjusting depth gauge settingGeneral information on sharpening cutting teeth Adjustment of depth gauge setting General advice on adjusting depth gauge settingTensioning the chain Sharpening cutting teethChain oil Lubricating cutting equipmentFilling with chain oil Checking chain lubricationChecking wear on cutting equipment Chain drive sprocketFitting the bar and chain AssemblyFitting a spike bumper Fuel Fuel HandlingFuelling Fuel safetyTransport and storage Long-term storageStarting and stopping Starting and StoppingCold engine Warm engineStopping Working Techniques Basic safety rulesBefore use General working instructionsGeneral rules General Basic cutting techniqueTerms Cutting Felling technique for tree topsLimbing Safe distanceDirectional cuts FellingFreeing a tree that has fallen badly General adviceCutting trees and branches that are in tension What is kickback? How to avoid kickbackCutting the trunk into logs Carburettor adjustment MaintenanceGeneral Checking brake band wear Correctly adjusted carburettorChecking the front hand guard Checking the brake triggerMuffler Changing a broken or worn starter cord StarterTensioning the recoil spring Changing a broken recoil springSpark plug Air filterLubricating the bar tip sprocket Cooling system Adjustment of the oil pumpDaily maintenance Weekly maintenance Monthly maintenance Maintenance scheduleTechnical data Technical DataSaw chain filing and file gauges EC-declaration of conformity Bar and chain combinationsApplies to Europe only 1150867-26 ´z+Rvh¶6¨ ´z+Rvh¶6¨

CS 2139T specifications

The Jonsered CS 2139T is a robust chainsaw designed for both professional and semi-professional users seeking reliability, power, and ease of use. This model is perfect for tree care, firewood cutting, and other demanding tasks in forestry and landscaping.

One of the standout features of the CS 2139T is its powerful 39cc 2-stroke engine, which delivers impressive performance while maintaining fuel efficiency. This engine is designed for a quick start, thanks to its efficient ignition system, reducing the time users spend trying to get the saw running. The power-to-weight ratio is favorable, making it suitable for extended use without causing fatigue.

The chainsaw incorporates advanced technology such as the Clean Power engine, which minimizes harmful emissions while maximizing fuel efficiency. This is particularly beneficial for environmentally conscious users and complies with stringent emission regulations. The CS 2139T also features an Anti-Vibration system, which significantly reduces vibrations felt by the operator, enhancing comfort and control, especially during prolonged use.

Safety is a priority with the CS 2139T, featuring a chain brake that engages automatically in the event of kickback, ensuring that the user is protected from potential accidents. Additionally, the saw is equipped with a throttle lock that prevents accidental engagement, providing extra peace of mind.

The ergonomic design of the handle and controls has been thoughtfully engineered for ease of use, allowing operators to maneuver the chainsaw with confidence. The unique air filtration system enhances the longevity of the engine by preventing dust and debris from entering, resulting in less frequent maintenance and longer operating life.

The chainsaw also boasts a durable construction, with robust materials that withstand the rigors of cutting hard wood and facing varying weather conditions. A tool-free chain tensioning system allows for quick and easy adjustments, ensuring that users can maximize performance without wasting time.

In summary, the Jonsered CS 2139T is a reliable choice for demanding users who require a combination of power, efficiency, and safety. With its advanced technologies and thoughtful design features, it stands out as an exceptional tool in the world of chainsaws.
Top Page Image Contents