Jonsered CS 2139T manual General Safety Precautions, Before using a new chain saw

Page 6

GENERAL SAFETY PRECAUTIONS

Before using a new chain saw

•Please read this manual carefully.

•Check that the cutting equipment is correctly fitted and adjusted. See instructions under the heading Assembly.

•Refuel and start the chain saw. See the instructions under the headings Fuel Handling and Starting and Stopping.

•Do not use the chain saw until sufficient chain oil has reached the chain. See instructions under the heading Lubricating cutting equipment.

•Long-term exposure to noise can result in permanent hearing impairment. So always use approved hearing protection.

WARNING! Under no circumstances may the

!design of the machine be modified without the permission of the manufacturer. Always use genuine accessories. Non-authorized modifications and/or accessories can result in serious personal injury or the death of the operator or others.

WARNING! A chain saw is a dangerous tool

!if used carelessly or incorrectly and can cause serious, even fatal injuries. It is very important that you read and understand the contents of this operator’s manual.

WARNING! The inside of the muffler contain

!chemicals that may be carcinogenic. Avoid contact with these elements in the event of a damaged muffler.

WARNING! Long term inhalation of the

!engine’s exhaust fumes, chain oil mist and dust from sawdust can represent a health risk.

WARNING! The ignition system of this

!machine produces an electromagnetic field during operation. This field may under some circumstances interfere with pacemakers.To reduce the risk of serious or fatal injury, we recommend persons with pacemakers to consult their physician and the pacemaker manufacturer before operating this machine.

Important

IMPORTANT!

The machine is only designed for cutting wood.

You should only use the saw with the bar and chain combinations we recommend in the chapter Technical data.

Never use the machine if you are fatigued, while under the influence of alcohol or drugs, medication or anything that could affect your vision, alertness, coordination or judgement.

Wear personal protective equipment. See instructions under the heading Personal protective equipment.

Do not modify this product or use it if it appears to have been modified by others.

Never use a machine that is faulty. Carry out the checks, maintenance and service instructions described in this manual. Some maintenance and service measures must be carried out by trained and qualified specialists. See instructions under the heading Maintenance.

Never use any accessories other than those recommended in this manual. See instructions under the headings Cutting equipment and Technical data.

CAUTION! Always wear protective glasses or a face visor to reduce the risk of injury from thrown objects. A chain saw is capable of throwing objects, such as wood chips, small pieces of wood, etc, at great force. This can result in serious injury, especially to the eyes.

WARNING! Running an engine in a confined

!or badly ventilated area can result in death due to asphyxiation or carbon monoxide poisoning.

WARNING! Faulty cutting equipment or the

!wrong combination of bar and saw chain increases the risk of kickback! Only use the bar/saw chain combinations we recommend, and follow the filing instructions. See instructions under the heading Technical data.

Always use common sense

It is not possible to cover every conceivable situation you can face when using a chain saw. Always exercise care and use your common sense. Avoid all situations which you consider to be beyond your capability. If you still feel uncertain about operating procedures after reading these instructions, you should consult an expert before continuing. Do not hesitate to contact your dealer or us if you have any questions about the use of the chain saw. We will willingly be of service and provide you with advice as well as help you to use your chain saw both efficiently and safely. Attend a training course in

6 – English

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Operator′s manual KEY to Symbols Symbols on the machineSymbols in the operator’s manual Contents Introduction Dear CustomerWhat is WHAT? What is what on the chain saw?General Safety Precautions Before using a new chain sawAlways use common sense Machine′s safety equipment Personal protective equipmentChain brake and front hand guard General Safety Precautions Chain catcher Stop switchThrottle lockout Vibration damping systemGeneral rules Cutting equipmentMuffler Cutting equipment designed to reduce kickbackSharpening your chain and adjusting depth gauge setting Some terms that describe the bar and chainGeneral information on sharpening cutting teeth Tensioning the chain General advice on adjusting depth gauge settingAdjustment of depth gauge setting Sharpening cutting teethFilling with chain oil Lubricating cutting equipmentChain oil Checking chain lubricationChain drive sprocket Checking wear on cutting equipmentAssembly Fitting the bar and chainFitting a spike bumper Fuel Handling FuelTransport and storage Fuel safetyFuelling Long-term storageCold engine Starting and StoppingStarting and stopping Warm engineStopping Before use Basic safety rulesWorking Techniques General working instructionsGeneral rules Basic cutting technique GeneralTerms Limbing Felling technique for tree topsCutting Safe distanceFelling Directional cutsGeneral advice Freeing a tree that has fallen badlyCutting trees and branches that are in tension How to avoid kickback What is kickback?Cutting the trunk into logs Maintenance Carburettor adjustmentGeneral Checking the front hand guard Correctly adjusted carburettorChecking brake band wear Checking the brake triggerMuffler Tensioning the recoil spring StarterChanging a broken or worn starter cord Changing a broken recoil springAir filter Spark plugLubricating the bar tip sprocket Adjustment of the oil pump Cooling systemMaintenance schedule Daily maintenance Weekly maintenance Monthly maintenanceTechnical Data Technical dataBar and chain combinations Saw chain filing and file gauges EC-declaration of conformityApplies to Europe only 1150867-26 ´z+Rvh¶6¨ ´z+Rvh¶6¨

CS 2139T specifications

The Jonsered CS 2139T is a robust chainsaw designed for both professional and semi-professional users seeking reliability, power, and ease of use. This model is perfect for tree care, firewood cutting, and other demanding tasks in forestry and landscaping.

One of the standout features of the CS 2139T is its powerful 39cc 2-stroke engine, which delivers impressive performance while maintaining fuel efficiency. This engine is designed for a quick start, thanks to its efficient ignition system, reducing the time users spend trying to get the saw running. The power-to-weight ratio is favorable, making it suitable for extended use without causing fatigue.

The chainsaw incorporates advanced technology such as the Clean Power engine, which minimizes harmful emissions while maximizing fuel efficiency. This is particularly beneficial for environmentally conscious users and complies with stringent emission regulations. The CS 2139T also features an Anti-Vibration system, which significantly reduces vibrations felt by the operator, enhancing comfort and control, especially during prolonged use.

Safety is a priority with the CS 2139T, featuring a chain brake that engages automatically in the event of kickback, ensuring that the user is protected from potential accidents. Additionally, the saw is equipped with a throttle lock that prevents accidental engagement, providing extra peace of mind.

The ergonomic design of the handle and controls has been thoughtfully engineered for ease of use, allowing operators to maneuver the chainsaw with confidence. The unique air filtration system enhances the longevity of the engine by preventing dust and debris from entering, resulting in less frequent maintenance and longer operating life.

The chainsaw also boasts a durable construction, with robust materials that withstand the rigors of cutting hard wood and facing varying weather conditions. A tool-free chain tensioning system allows for quick and easy adjustments, ensuring that users can maximize performance without wasting time.

In summary, the Jonsered CS 2139T is a reliable choice for demanding users who require a combination of power, efficiency, and safety. With its advanced technologies and thoughtful design features, it stands out as an exceptional tool in the world of chainsaws.
Top Page Image Contents