TECHNICAL DATA
EC-declaration of conformity
(Applies to Europe only)
Jonsered, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declares under sole responsibility that the chain saws Jonsered CS 2147, CS 2147CWH, CS 2152, CS 2152W, CS 2152WH, CS 2152C and CS 2152CWH from 2002’s serial numbers and onwards (the year is clearly stated in plain text on the type plate with subsequent serial number), are in conformity with the requirements of the COUNCIL’S DIRECTIVES:
of June 22, 1998 ”relating to machinery” 98/37/EC, annex IIA.
of May 3, 1989 ”relating to electromagnetic compatibility” 89/336/EEC, and applicable supplements.
of May 8, 2000 ”relating to the noise emissions in the environment” 2000/14/EC.
For information relating to noise emissions, see the chapter Technical data. The following standards have been applied: EN292-2,
CISPR 12:1997, EN608.
Notified body: 0404, SMP Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has carried out EC type examination in accordance with the machinery directive’s (98/37/EC) article 8, point 2c. The certificates for EC type examination in accordance with annex VI, have the numbers: 404/02/898 – CS 2152, CS 2152W, CS 2152WH 404/02/898 – CS 2152C, CS 2152CW, CS 2152CWH 404/03/985 - 2147 CWH
In addition, SMP, Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has certified conformity with annex V of the Council’s Directive of May 8, 2000 ”relating to the noise emissions in the environment” 2000/14/EC. The certificates have the numbers: 01/161/050 - CS 2147 01/161/051 - CS 2147 CWH 01/161/047 – CS 2152, CS 2152W, CS 2152WH 01/161/048 – CS 2152C, CS 2152CW, CS 2152 CWH
The supplied chain saw conforms to the example that underwent EC type examination.
Huskvarna 3 July 2003
Bo Andréasson, Development manager
