Jonsered 2054 manual Min m, 10 ft

Page 18

SAFETY INSTRUCTIONS

GENERAL SAFETY PRECAUTIONS

1

Chain saws are designed solely for cutting wood. The only

 

cutting equipment that can be used with this chain saw are

 

the combinations of bars and chains recommended in the

 

”Technical data” section.

2

Never use a chain saw if

 

 

 

you are tired, if you have

 

drunk alcohol, or if you

 

are taking medication that

7FUEL SAFETY

(Refuelling, fuel mixture, storage.)

!Fuel and fuel vapour are highly inflammable. Take care when handling fuel and chain oil. Keep away from naked flames and do not breathe in fuel vapour.

 

affects your vision, your

 

judgement or your co-

 

ordination.

 

 

 

 

 

3

Always wear suitable protective clothing. See the section

 

on ”Personal protective equipment”.

4

Never use a chain saw that has been modified in any way

 

from its original specification.

5

Never use a chain saw

 

 

 

 

 

 

 

that is faulty. Carry out

 

 

 

 

the regular checks,

 

 

 

 

maintenance and service

 

 

 

 

routines described in this

 

 

 

 

manual. Some

 

 

 

 

maintenance and service

 

 

 

 

measures must be carried

 

 

 

 

out by trained specialists.

 

 

 

 

See the section on

 

 

 

 

”Maintenance”.

 

 

 

6

STARTING

 

 

 

 

 

 

 

 

 

• Never start a chain saw unless the bar, chain and clutch cover are fitted

•Never try to refuel the saw while it is running.

•Make sure there is plenty of ventilation when refuelling or mixing fuel (2-stroke mixture).

•Move the saw at least 3 m from the refuelling point before starting it.

•Never start the chainsaw:

a)If you have spilt fuel or chain oil on the saw. Wipe off the spill and allow remaining fuel to evaporate.

b)If you spill fuel or chain oil on yourself or your clothes. Change your clothes.

c)If there is a fuel leak. Check regularly for leaks from the FUEL CAP and FUEL LINES.

Min. 3 m

(10 ft)

correctly. (See section on ”Assembly”).

• Never start a chain saw indoors. Exhaust fumes can be dangerous.

• Before starting the saw make sure there are no people or animals nearby who might be put at risk.

• Place the saw on the ground and hold the rear handle down with your right foot. Grasp the front handle firmly using your left hand. Make sure the chain saw is steady and the chain is not touching the ground. Then grasp the starter handle with your right hand and pull the starter cord.

•Always store the chain saw and fuel away from any sources of sparks or naked flames, e.g. machines, electric motors, relays, switches, boilers, etc.

•Always store fuel in an approved container designed for that purpose.

•For longer periods of storage or for transport of the saw, the fuel and chain oil tanks should be emptied. Ask where you can dispose of waste fuel and chain oil at your local petrol station.

8Never use any accessories other than those recommended in this manual. See the sections on ”Cutting equipment” and ”Technical data”.

!The risk of accident is increased if you use the wrong cutting equipment or a chain that is not sharpened correctly. Using the wrong combi- nation of bar and chain can increase the risk of accidents!

18 – English

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Operator´s manual EPA KEY to Symbols SymbolsContents Safety Instructions Personal Protective EquipmentChain brake and front hand guard Throttle lock Chain catcherRight hand guard Stop switch Vibration damping systemMuffler Checking the automatic brake Checking brake band wearChecking the front hand guard Checking the brake triggerThrottle lock Cutting Equipment 5 basic rulesSaw chain Cutting equipment designed to minimise kickbackBar Some terms that describe the bar and chainSharpening your chain and adjusting raker clearance General information on sharpening cutting teethSharpening cutting teeth General advice on setting raker clearance Setting the raker clearanceTensioning the chain Filling with chain oil Lubricating cutting equipmentChain oil Never use waste oilChecking wear on cutting equipment Checking chain lubricationLubricating the clutch drum bearing Lubricating the bar tip sprocketHOW to Avoid Kickback What is kickback?General rules Do not let go of the handlesNever use the saw one- handed Min m 10 ftBasic safety rules General Working InstructionsTerms Basic cutting techniqueGeneral CuttingLimbing Tree felling techniqueSafe distance Felling directionClearing the trunk and preparing your retreat FellingCutting the trunk into logs General adviceFreeing a tree that has fallen badly = high accident risk Freeing a Trapped treeWhat is WHAT? What is what?Assembly Mounting guide bar and chainFuel Handling Fuelmix10 ft Oil pumpFuelling Min mStart and Stop Start and stopMaintenance CarburetorChanging a broken or worn starter cord Starter device assemblyStarter device Tensioning the recoil springMuffler Needle bearing maintenanceAir filter Spark plugWinter use Centrifugal cleaning TurboCooling system Electrically heated handles or carburetorWeekly maintenance Daily maintenance Monthly maintenanceTechnical Data 2054Federal Emission Control Warranty Statement Your Warranty Rights Obligations108 87 1998W48

2054 specifications

The Jonsered 2054 is a high-performance chainsaw designed for both residential and professional use, offering a blend of power, reliability, and advanced technology. Known for its durability and efficiency, the 2054 has garnered a reputation among users who require effective cutting tools for various tasks, from tree felling to firewood preparation.

One of the standout features of the Jonsered 2054 is its powerful engine. Equipped with a robust 54cc two-stroke engine, it delivers impressive power to tackle demanding cutting jobs with ease. The engine is designed with advanced fuel technology, allowing for a more efficient combustion process that not only increases power output but also improves fuel economy. This ensures that users can work longer without frequent refueling, making it an ideal choice for extended use.

The chainsaw incorporates a low-vibration system, which significantly reduces user fatigue during operation. This technology dampens vibrations produced during cutting, ensuring a smoother experience and promoting more precise cuts. The ergonomic handle design further enhances comfort, allowing users to maintain a firm grip without straining their hands over prolonged periods.

Safety is a top priority with the Jonsered 2054, as it is equipped with several protective features. The chainsaw comes with a chain brake mechanism that halts chain movement in the event of kickback, minimizing the risk of injury. Additionally, the easy-access air filter and tool-less chain tensioning system simplify maintenance tasks, allowing users to keep their equipment in top condition without the hassle of complicated procedures.

The Jonsered 2054 also boasts a powerful cutting system, utilizing a high-quality cutting chain and bar that ensures smooth and efficient cutting. The balanced design of the saw contributes to its maneuverability, enabling users to navigate tight spaces with ease when performing detailed work.

Overall, the Jonsered 2054 combines power, comfort, and safety in a well-engineered package. It's a versatile tool suited for a wide range of cutting tasks, and its advanced technologies ensure that it delivers consistent performance even under challenging conditions. Whether for personal or professional use, the Jonsered 2054 is a reliable choice that meets the demands of modern forestry and landscaping needs.
Top Page Image Contents