Control cable rough-in | Jacuzzi SteamPro specification

INSTALLATION

A. STEAM CONTROL BY 30 MINUTE LOW VOLTAGE ON/OFF CONTROL.

1. Control cable rough-in:

The low voltage control can be mounted up to 75 feet from the generator either inside or outside the steam room. (A 25’ cable provided.) Also, see # 4 Optional Secondary Generator Control. String (3) 18 to 22 AWG solid wires from the control location through 1/2" holes in the wall studes or ceiling joists to the generator.

Note: 1) Do not staple through or damage wires,

2)Label or color code wires for proper TB1 to R30i orientation. See diagram.

2.Control cable at the generator

Route control wires through the generator CONTROL WIRING ENTRY and appropriate strain relief. Connect 3 wires to terminal block TB-1 on the printed circuit assembly, as shown in diagram.

3. Install generator control (R30i)

The low voltage control can be mounted directly to a finished wall either inside or outside the steam room. Using a 1-3/4" hole saw, drill a hole in the finished wall where the control is to be mounted (the control wires should already be roughed-in to this location). Locate the control wires, pull them out through the 1-3/4" hole and plug the 3 wires into the connector on the back of the control housing, as shown in diagram. Run a bead of 100% silicone caulk around the perimeter on the back of the control housing. See diagram. Insert the control into the wall cavity.

4. Optional second generator control

As an option, a second R30i control can be installed with the generator to provide ON/OFF control both inside and outside the steam room. The second control should be installed as described in paragraphs 1 & 3, with the second control wire plugged into the same connector TB1 connector as the first control on the PCA.

THIS LOW VOLTAGE CONTROL CAN

BE LOCATED INSIDE OR OUTSIDE

THE STEAM ENCLOSURE

(OPTIONAL NUT INSTALLATION IF BACK OF WALL IS ACCESSABLE)

APPLY SEALANT

(100% SILICONE CAULK)

1-3/4" DIAMETER HOLE IN FINISHED WALL

BUSHING B

To prepare steam generator:

1.Make certain that power is disconnected. Remove cover.

2.Remove and discard plug from hole A.

3.Feed wire through hole A and connect to TB1 on the circuit board.

4.Locate strain relief bushing 1" from stripped end of cable jacket with the two connectors. Snap strain relief bushing B into hole A.

5.Replace cover.

(3) GREEN

(2) RED

(1) WHITE

HOLE A

TB1

SK1

SK3

SK4

GREEN (3)

RED (2)

WHITE (1)

LOW VOLTAGE CONTROL WIRE (25') IS PROVIDED FOR 5 VOLT DC SWITCH CONNECTION TO STEAM GENERATOR. NO ADDITONAL ELECTRICAL SUPPLY OR WIRING REQUIRED.

SteamPro specifications

The Jacuzzi SteamPro is an innovative steam shower system designed to elevate your home spa experience, offering a blend of relaxation and wellness. Known for its sleek design and advanced technology, the SteamPro is not just a steam generator; it embodies the essence of luxury and comfort.

One of the standout features of the SteamPro is its ability to produce high-quality steam quickly and efficiently. The advanced steam generator utilizes a patented technology that ensures rapid heating, allowing users to enjoy soothing steam in less time. This efficiency is complemented by customizable steam settings, which enable you to adjust the intensity and duration of your steam sessions to suit your personal preferences.

The SteamPro also incorporates a user-friendly control panel, featuring a digital display that allows for easy navigation and access to various functions. This interface gives users the ability to program personalized steam sessions, including pre-set temperature levels and aromatherapy options. The inclusion of essential oil dispensers enhances the experience, filling your space with calming scents that promote relaxation and well-being.

In terms of technology, the SteamPro is equipped with an advanced water softening system that minimizes mineral buildup, ensuring longevity and optimal performance. This system not only protects the unit but also contributes to cleaner steam, enhancing the overall shower experience. The design also allows for efficient drainage, preventing water from pooling and maintaining a clean environment.

Safety is a top priority with the SteamPro, which incorporates features such as automatic shut-off functions to prevent overheating and overpressure. The steam generator is constructed from high-quality materials that resist corrosion and wear, ensuring durability and reliability over time.

The SteamPro’s compact design makes it an ideal choice for various bathroom layouts, easily integrating with both new and existing setups. Its stylish aesthetics add a modern touch to any space, making it not just a functional piece of equipment, but also a stylish addition to your home.

In summary, the Jacuzzi SteamPro is a pinnacle of steam shower technology that combines efficiency, safety, and luxury. With customizable features, advanced materials, and user-friendly design, it represents a significant advancement in home wellness solutions, allowing users to transform their daily routine into a spa-like retreat. Whether it’s for relaxation or therapeutic benefits, the SteamPro provides an unparalleled steam shower experience.