Contents
Specifications _______________________________________________________________________ | 1 |
Framing and Support _________________________________________________________________ | 2 |
2 | |
Electrical and Service Access ___________________________________________________________ | 3 |
Drain Information _____________________________________________________________________ | 4 |
Plumbing and Water Supply ____________________________________________________________ | 5 |
Water Level Sensor ___________________________________________________________________ | 6 |
Rapid Heat™ Operation ________________________________________________________________ | 6 |
Operation __________________________________________________________________________ | |
Maintenance ________________________________________________________________________ | |
Warranty ___________________________________________________________________________ |
Important: Read complete instructions before beginning installation.
Each whirlpool bath arrives ready for installation, completely equipped with motor/pump assembly and plumbing and fittings necessary for whirlpool operation. The drain/overflow kit must be installed on the bath.
Remove the bath from the carton. Retain the shipping carton until satisfactory inspection of the product has been made. Do not lift the bath by the plumbing at any time; handle by the shell or frame only.
Immediately upon receipt, inspect the shell before installing. Should inspection reveal any damage or defect in the finish, do not install the bath. Damage or defect to the finish claimed after the bath is installed is excluded from the warranty. Jacuzzi Whirlpool Bath's responsibility for shipping damage ceases upon delivery of the products in good order to the carrier. Refer any claims for damage to the carrier. For definitions of warranty coverage and limitations, refer to the warranty information.
All bath units are factory tested for proper operation and watertight connections prior to shipping. Note: Prior to installation, the bath must be filled to the overflow with water and operated to check for leaks that may have resulted from shipping damage or mishandling. Jacuzzi Whirlpool Bath is not responsible for any defect that could have been discovered, repaired, or avoided by following this inspection and testing procedure.
Save These Instructions for Future Use.
Owner's Record
Date Purchased ____________________________________________________________
Purchased From ____________________________________________________________
Installed By ________________________________________________________________
Serial Number ___________________________