Marantz SR6300 manual ¡7AC Outlet, Speaker Systems a Terminals, Speaker Systems B Terminals

Page 10

REAR PANEL CONNEC - TIONS (SEE PAGE iii.)

All connections to the rear panel should be made with the entire system powered off.

To avoid errors, it is advisable to connect one cable at a time between the various components.

aFM antenna terminal (75 ohms)

Connect an external FM antenna with a coaxial cable, or a cable network FM source.

AM antenna and ground terminals

Connect the supplied AM loop antenna. Use the terminals marked “AM” and “GND”.

The supplied AM loop antenna will provide good AM reception in most areas.

Position the loop antenna until you hear the best reception.

sPRE OUT jacks

Jacks for Front - L/R, Center,Surround-L/R and Surround center. Use these jacks for connection to an external power amplifier.

dSUB WOOFER output jack

Connect to the input jack(s) of the power amplifier for subwoofer channel or powered subwoofer.

fAnalog AUDIO outputs for audio

recording equipment

TAPE and CD-R/MD

Connect each output to the audio inputs (REC in) of your recording equipment.

gAnalog AUDIO inputs

CD, TAPE, and CD-R/MD

Connect the audio outputs of your source components to the input jacks on the receiver.

hVIDEO (VIDEO/S-VIDEO) outputs

VCR1, and DSS/VCR2

Connect each output to the video input (REC in) of your video recording equipment.

jTV MONI. (VIDEO/S-VIDEO) output jacks

Connect the TV MONI jack to your TV’s video input (VIDEO IN) jack. You can connect your video equipment with S-VIDEO jacks if possible, or the composite VIDEO jacks.

You must use the same type of connection from your video player into the receiver, and out of the receiver into your TV.

Both must be composite video or both must be S-Video. You cannot convert a signal from one type to the other.

kSPEAKER SYSTEMS terminals

SPEAKER SYSTEMS A TERMINALS

FRONT Left & Right speakers output terminals

Connect to the front left & right speakers.

CENTER speaker output terminals

Connect to the center speaker.

SURROUND Left & Right speakers output terminals

Connect to the surround (rear) left & right speakers.

SURROUND Center speaker output terminals

Connect to the surround center speaker.

SPEAKER SYSTEMS B TERMINALS

FRONT Left & Right speakers output terminals

Connect to the front left & right speakers.

Notes:

•When you use the speaker systems A and B simultaneously, the connected speakers which are impeadance 12 to 16 ohms must be used.

l6.1 CH INPUT jacks

Connect to the outputs of DVD Audio player, SACD Multi channel player or an external multichannel decoder.

¡0DIGITAL outputs

Optical and Coaxial

Connect to the digital input of your digital recording equipment.

¡1DIGITAL inputs

Dig.1,2 (Optical) and Dig. 3, 4, 5 (Coaxial)

Connect each input to the digital output of your source equipment. Use the SETUP MAIN MENU to assign digital input to appropriate source. (see page 16)

Note :

•The coaxial connections are not for AC-3 RF from the LD player, If you want to decode this type of signal, an external demodulator must be used.

¡2REMOTE CONTOROL IN/OUT terminals

Connect to a Marantz component equipped with remote control (RC- 5) terminals.

¡3Analog AUDIO outputs for video recording equipment

VCR1, and DSS/VCR2

Connect each output to the audio inputs (REC in) of your video recording equipment.

¡4Analog AUDIO inputs for video source equipment

TV, DVD, VCR1, and DSS/VCR2

Connect each input to the audio outputs of your video source equipment.

¡5VIDEO inputs

TV, DVD, VCR1, and DSS/VCR2

Connect each input to the video outputs of your video source equipment.

¡6S-VIDEO inputs

TV, DVD, VCR1, and DSS/VCR2

Connect each input to the S-video outputs of your video source equipment.

¡7AC OUTLET

Connect the power cables of components such as a DVD and CD player to these outlets. Both SWITCHED and UNSWITCHED outlets are provided.

The one marked SWITCHED provides power only when the SR6300 is turned on and is useful for components which you use every time you play your system.

The one marked UNSWITCHED is always live as long as the SR6300 is plugged into a live outlet.

A component connected here may be left on permanently, or may be switched off with its own power switch.

Caution:

•In order to avoid potential turn-off thumps, anything plugged in here should be powered up BEFORE the SR6300 is turned on.

•The capacity of this AC outlet is 120W. Do not connect devices that consume electricity more than the capacity to this AC outlet. If total power consumption of connected devices exceeds the capacity, protection circuit shuts down the power supply.

¡8Power Cable

Connect to AC power outlet.

SR6300 can be powered by 120V AC only.

ENGLISH

5

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Model SR6300 User Guide Risk of Electric Shock Read Before Operating Equipment AC Polarized PlugPage ¡0 ¡1 ¡32 ¡7 ¡8 Table of Contents Introduction DescriptionFeatures BUILT-IN 6 Channel Power AmplifierFront Panel Features SeeSpeaker Systems a Terminals ¡7AC OutletSpeaker Systems B Terminals Names and Functions C d e f Loading Batteries Remote Control RangeGeneral Infromation of RC7300SR Connections Speaker PlacementHeight of the Speaker Units Connecting Banana Plug Connecting SpeakersConnecting Speaker Wire Connecting a SubwooferConnecting Audio Components Connecting Digital Audio ComponentsVIDEO, S-VIDEO Jacks Connecting Video ComponentsVideo jack Advanced Connecting Connecting Remote Control JacksConnecting AN FM Outdoor Antenna Connecting the Antenna TerminalsConnecting the Supplied Antennas Connecting AN AM Outdoor AntennaOn Screen Display Menu System SetupSetup Main Menu UnlockSpeaker Setup Speaker SizeSpeaker Distance Time Alignment Speakers LevelSurround PreferencePL2 PRO Logic II Music Parameter CS2 Circle Surround II Parameter CH Input LevelBasic Operation Listening to the TunerPlayback Operation Auto Power onAuto Power OFF TV Auto ON/OFF FunctionAdjusting the Surround Level Setting the Sleep TimerOFF S C R E E N D I S P L a Y Infomation Master Volume ControlSleep Timer General InformationOperation Controlling a Marantz DVD Player DVD ModeControlling a Marantz VCR VCR1 Mode Controlling Marantz ComponentsDeck A, B Deck a BErasing Learning Code Learn ModeLearning Procedure Erasing the code by buttonsProgramming Macros Macro ModeErasing the all functions Confirming Macros Using MacrosEditing Macros Now, execute the macro you just programmed Examples of Macro ProgramsExample PlayAdjusting the Interval Time of Macro Operations Transmitting Clearing Macro ProgramsSurround Mode Stereo VirtualDSP Surround MOVIE, HALL, STADIUM, Matrix Source DirectAUTO, DOLBY, DIGITAL, PRO Logic Auto Surround Input SignalFluorescent Indicator 96KHZ PCM AUTO, STEREO, PCMVIRTUAL, DTS Virtual DTS-ES6.1CH Format Status & Surround Mode Temporary Display StatusDolby DIGITAL5.1CH CS2 Music Dolby DIGITAL2CH CS2 Mono Dolby DIGITAL5.1CH Movie Dolby DIGITAL2CH HallTrouble Shooting Symptom Cause RemedyMemory backup HOW to Reset the UnitGeneral Malfunction Technical Specifications DimensionIs a registered trademark

SR6300 specifications

The Marantz SR6300 is a multi-channel audio/video receiver known for its impressive performance and versatility, making it a popular choice among home theater enthusiasts. This receiver is part of Marantz's celebrated line of high-fidelity equipment, bringing together powerful amplification, advanced processing capabilities, and user-friendly features.

One of the key characteristics of the SR6300 is its robust amplification system. It delivers a total of 100 watts per channel across all five channels, allowing for dynamic sound reproduction that can fill even larger rooms with clarity and detail. The integrated high-current amplifier section provides ample power while ensuring that even the most demanding speakers perform at their best. This amplifier technology is complemented by Marantz's commitment to enhancing audio quality, ensuring minimal distortion and noise.

The SR6300 supports various surround sound formats, including Dolby Digital and DTS, allowing users to experience their favorite movies, music, and games in immersive audio. Additionally, it features a Dolby Pro Logic II mode, which enables users to create a surround sound experience from stereo sources, transforming everyday content into an engaging audio-visual experience.

Another significant feature of the Marantz SR6300 is its array of input and output options. With multiple digital and analog inputs, including six audio inputs, two optical digital inputs, and one coaxial digital input, the receiver can accommodate a range of source components, such as DVD players, gaming consoles, and streaming devices. The SR6300 also includes multi-room capability, enabling audio playback in different zones throughout the home, enhancing the overall flexibility of the system.

The user interface of the SR6300 is designed for simplicity and ease of use, with a backlit remote control and an intuitive on-screen display. This makes navigating through settings, adjustments, and source selection straightforward, catering to both novice and experienced users.

In terms of build quality, the SR6300 reflects Marantz's dedication to precision craftsmanship, featuring a solid chassis, high-quality components, and an elegant design that fits seamlessly into any home theater setup. Overall, the Marantz SR6300 proves to be a worthy investment for anyone looking to elevate their audio experience with a reliable, high-performing receiver that combines sound quality, flexibility, and style.
Top Page Image Contents