Marantz SR6300 manual Clearing Macro Programs

ENGLISH

CLEARING MACRO PROGRAMS

The following procedure is used to erase macros you have programmed into the remote controller’s memory.

1. Press and hold the T.MODE ⁄1and MENU button ¤2until the MACRO is displayed on the LCD.

•LEARN and MACRO is displayed blinking.

2. Press and hold the CL button ., then the button for the function

,to be cleared (in this case DVD) for 3 seconds.

DVDCL will appear on LCD.

3. Press the OK button ⁄5to clear and return step 1.

•To cancel the memory clearing operation, do not press OK button ⁄5and simply touch any other button.

4. To return the USE mode, press and hold down the OK button ⁄5 until USE is displayed in the display.

ADJUSTING THE INTERVAL TIME OF MACRO

OPERATIONS TRANSMITTING

1. Press and hold the T.MODE ⁄1and SETUP button ⁄7until the SETUP is displayed on the LCD.

•SETUP is displayed for 3 seconds

2. Confirm the display changes from SETUP to MCRxx.

(“xx” means the interval time of macro operations transmitting )

3. Press the Cursor/ button ⁄5to change the interval time.

•The interval time can be changed from 0.5 to 5 seconds by 0.5 seconds step.

(0.5 seconds)

(1 second)

(1.5 seconds)

(5 seconds)

4. Press and hold down the OK button ⁄5until USE is displayed in the display.

30