Jacuzzi FL61000 manual Control Panel Switches

Page 16

Pump/Motor Switch (ON/OFF )

Pressing the button will turn ON the two speed pump/motor at HIGH speed. Pressing a second time will turn OFF the pump/motor. To change speeds use the Toggle buttons.

Pump/Motor Status LED

When the pump/motor is ON at HIGH speed all four LED indicator lights will be lit. When the pump/motor is ON at LOW speed the bottom LED indicator light will be lit.

Left Air Valve Switch

Pressing this button will activate the left air valves using the Toggle buttons to increase/decrease air flow to the left set of jets. The air flow can be adjusted from no air to maximum air.

Left Air Valve Status LED

The Left Air Valve Status LED will show four LED lights at maximum air and only one LED light when the air is turned OFF. Each additional LED indicates more air flow.

Right Air Valve Switch

Pressing this button will activate the right air valves. Use the Toggle buttons to increase/ decrease air flow to the right set of jets. The air flow can be adjusted from no air to maximum air.

Right Air Valve Status LED

The Right Air Valve Status LED will show four LED lights at maximum air and only one LED light when the air is turned OFF. Each additional LED indicates more air flow.

Bath Light Switch (ON/OFF )

Pressing this button will turn ON the white bath light(s). Pressing the Toggle buttons at this time will increase or decrease light intensity.

Pressing the button a second time will access the saved favorite color. To cycle lighting colors use the Toggle button. Pressing the Toggle button again will stop the light cycling. The color displayed when the cycle has been stopped will be saved as your favorite color.

Pressing the button a third time to turn OFF the light.

Wave Function Switch (ON/OFF )

Pressing this button activates wave action by opening and closing air valves. Pressing a second time will turn OFF the wave action.

When pressing this button after pressing the Pump/Motor button or the Air Valve button, the wave action will work on both Right and Left Air valves.

NOTE: When switching between functions, the LED for the inactive functions will dim and the active function will brighten.

Control Panel Switches

Left air valve,

Left air

Bath

Right air

Right air

Status LEDs

valve

light

valve

valve,

 

 

 

 

Status LEDs

Pump/Motor

On-Off

Wave

Toggle

Air bath Blower

status LEDs

Pump/

function

switches

status

 

Motor

 

 

LEDs

Air Bath Switch

Pressing this button will activate the blower using the Toggle buttons to increase/decrease air flow from the blower. Blower air can be adjusted from low air to maximum air.

Air Bath Status LED

The Air Bath Status LED will show four LED lights at maximum air and only one LED light when the air is turned OFF. Each additional LED indicates more air flow.

Toggle Switches

The Toggle buttons, up and down , act on each of the other switches to increase, decrease, or modify functionality. Use the up arrow to increase and the down arrow to decrease.

•Pressing a toggle button after pressing the Pump/Motor button will increase or decrease speeds on the Pump/Motor. If the pump/motor is on HIGH speed press the down arrow to select LOW speed. If the pump/motor is on LOW speed press the up arrow to select HIGH speed.

•Pressing an up or down toggle button after pressing the Bath Light button once will increase or decrease the white light brightness. Pressing an up or down toggle button after pressing the Bath Light button twice will begin cycling the light colors.

Leave the colors cycling or press the same toggle button again to stop the color cycling.

With the lights stopped on a color pressing the Bath Light button a third time will turn OFF the light. (A favorite color will be saved ONLY when the cycling has been stopped on that color and then turned OFF.)

(Continued)

Jacuzzi Whirlpool Bath: Finestra Walk-in Bath

Page 16

FL61000B • 10/07

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Finestra Walk-In Bath Important Safety Instructions Read and Follow ALL InstructionsOperation Contents Specifications Back Left ENDDimensions Cutout Total WeightProduct Weight Drain/OverflowSkirt Mounting Electrical Specifications Heater StandardRequires a dedicated Gfci protected separate circuit Back Left END Front Requires two seperate Gfci protected circuits EW25, EW30 350 lb kg EY60, EY65 350 lb kg Installation Service AccessFraming and Support Semi-SunkenLeveling Legs Right side of unit Left side of unitClean-Up After Installation Drain InformationPlumbing Anti-Siphon ValveOperation Water LevelControlling Whirlpool Action General FunctionsControl Panel Switches Vacuum/Pressure Switch High-Limit SwitchProper Door Closure OperationTo Set Timer PrO3 Ozone Sanitation SystemMaintenance Suction/Intake Cover/Strainer Maintenance Interconnection of Airbath, Whirlpool, and Salon BathsAIRBath Interconnection Diagram Electrical SpecsWhirlpool Bath Interconnection Diagram Salon Bath Interconnection Diagram FL61000B 10/07Troubleshooting Guide Authorized Service Bath ProductsThis page Intentionally Left Blank Jacuzzi Whirlpool Bath Warranty Registration Card

FL61000 specifications

The Jacuzzi FL61000 is an innovative and versatile hot tub that combines luxury with advanced technology to create an enjoyable and therapeutic experience. Designed for both relaxation and socialization, the FL61000 can accommodate up to six individuals, making it perfect for family gatherings or intimate get-togethers with friends.

One of the standout features of the Jacuzzi FL61000 is its powerful hydrotherapy system. The hot tub is equipped with strategically placed jets that provide targeted massage to various muscle groups throughout the body. With a variety of jet types, including rotating and directional jets, users can customize their massage experience according to individual needs.

The FL61000 also boasts an advanced water management system, which enhances the quality and clarity of water. Equipped with a filtration system that uses enhanced sanitation technologies, including ozone purification, the hot tub minimizes chemical usage while ensuring clean and safe water. This gives users peace of mind while they indulge in relaxation.

In terms of design, the Jacuzzi FL61000 is aesthetically pleasing with its sleek, modern lines and available in several stylish colors that can complement any outdoor space. Its durable acrylic shell provides long-lasting beauty and is engineered to withstand various weather conditions. The hot tub is framed with a robust composite base, ensuring longevity and stability.

Energy efficiency is another hallmark of the FL61000. It features an insulating cover that reduces heat loss, ensuring that energy costs are kept low. The hot tub is also equipped with an energy-efficient pump that minimizes electricity consumption without compromising performance.

Additional technologies integrated into the Jacuzzi FL61000 enhance user convenience and enjoyment. The intuitive control panel allows for easy customization of temperature, jet speed, and lighting. Some models even support smart technology, offering remote access through mobile devices for added flexibility.

Finally, safety features such as non-slip surfaces and easy-access steps ensure that users can enjoy the hot tub with peace of mind. Whether seeking relief from everyday stress or looking to create a social hub at home, the Jacuzzi FL61000 delivers a luxurious experience that can be enjoyed year-round.
Top Page Image Contents