Jacuzzi FL61000 manual Maintenance

Page 19

MAINTENANCE

Cleaning the Bath

To clean your bath, simply use a mild, nonabrasive liquid detergent solution. You can protect and restore the gloss to a dulled acrylic surface by applying Meguiar’s #10 Mirror Glaze, a product specifically designed for use on acrylic finishes. If Meguiar’s is not available, an acrylic polish of equal quality or automotive paste wax is acceptable.

Never use abrasive household cleaners on any Jacuzzi Whirlpool Bath product.

Repairs to the Surface

Minor scratches which do not penetrate the color finish can be removed by lightly sanding with 600-grit wet/dry sandpaper. Restore the gloss using Meguiar’s Mirror Glaze or automotive paste wax.

Major scratches and gouges which penetrate the acrylic surface will require refinishing. Ask your Jacuzzi Whirlpool Bath dealer for special instructions.

Bath Additives

NOTE: Do not use oil or oil-based bath additives.

If you want to use any kind of bath additive, use only a small amount of low-foaming powder or crystal substance; the whirlpool action intensifies the foaming properties of soaps.

The use of certain bath oils, bubble baths and bath additives may increase the level of accumulations of bath residue in the whirlpool system. If excess accumulations persist, you should discontinue use of these products.

Purging the Whirlpool System

NOTE: The Whirlpool System should be purged at least twice a month.

To remove accumulations of bath residue from the whirlpool system, it is recommended that a whirlpool bath be purged at least twice a month. For best results, however, we recommend that you purge your whirlpool bath after each use using, Systems Clean™, our exclusive two-part plumbing system cleaner made specifically for whirlpool baths.

Systems Clean™ is available through an authorized Jacuzzi Whirlpool Bath distributor or by calling us direct at 1-800-288- 4002.

Systems Clean™ Instructions

Refer to the instructions on the Systems Clean™ packet.

CAUTION: Do not use while bathing! Use extreme caution when handling this product!

Immediately after bathing and exiting the whirlpool bath, leave the bath water in the tub and add more hot water. The water level in the tub must be at least 2” (5,08 cm) above the highest jet.

NOTE: Inducted air from the hydromassage system will cause the Systems Clean™ contents to foam increasing odor.

Turn OFF the whirlpool air control or turn it to the lowest setting and pour in the entire contents of PACKET #1 ONLY directly into the bath water. For best results, pour the System Clean into the tub near the intake for the circulation pump and be sure to avoid contact with your skin. Allow the whirlpool to run for 30 seconds and then add PACKET #2 ONLY. It is important to use Packet #1 before Packet #2 to avoid a strong odor. Allow the bath to run for 5 to 10 minutes then drain the tub completely. Refill the tub with cold water and run for 2 to 3 minutes. Drain completely and rinse off any residue. Remember to reset the air valves to your bathing comfort level.

DANGER: Harmful if swallowed. Eye irritant. Protect your eyes, skin and mucus membranes from contact with this product or its concentrated solution. A strong alkaline product can cause severe burns to the eyes and skin.

If you have followed the standard purging instructions above and still have an excess accumulation of bath residue and desire an alternative cleaning mechanism, we recommend SUPER SYSTEMS CLEAN™ PLUS manufactured by Stearns Packaging to rectify this condition. This may be obtained by contacting us at 1-800-288-4002. It is recommended that you follow the instructions provided by the manufacturer with the product. Repeated use may be necessary. SUPER SYSTEMS CLEAN™ PLUS does not replace the necessity to regularly purge your whirlpool system with Systems Clean™ as recommended.

Ozone Maintenance

The PrO3 Ozone Sanitation System is a maintenance-free system. All that is required is the regular system cleaning using the Systems Clean™ as directed.

Jacuzzi Whirlpool Bath: Finestra Walk-in Bath

Page 19

FL61000B • 10/07

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Finestra Walk-In Bath Read and Follow ALL Instructions Important Safety InstructionsOperation Contents Back Left END SpecificationsDrain/Overflow DimensionsCutout Total Weight Product WeightHeater Standard Skirt Mounting Electrical SpecificationsRequires a dedicated Gfci protected separate circuit Back Left END Front Requires two seperate Gfci protected circuits EW25, EW30 350 lb kg EY60, EY65 350 lb kg Semi-Sunken InstallationService Access Framing and SupportRight side of unit Left side of unit Leveling LegsAnti-Siphon Valve Clean-Up After InstallationDrain Information PlumbingGeneral Functions OperationWater Level Controlling Whirlpool ActionControl Panel Switches Operation Vacuum/Pressure SwitchHigh-Limit Switch Proper Door ClosurePrO3 Ozone Sanitation System To Set TimerMaintenance Interconnection of Airbath, Whirlpool, and Salon Baths Suction/Intake Cover/Strainer MaintenanceElectrical Specs AIRBath Interconnection DiagramWhirlpool Bath Interconnection Diagram FL61000B 10/07 Salon Bath Interconnection DiagramTroubleshooting Guide Bath Products Authorized ServiceThis page Intentionally Left Blank Jacuzzi Whirlpool Bath Warranty Registration Card

FL61000 specifications

The Jacuzzi FL61000 is an innovative and versatile hot tub that combines luxury with advanced technology to create an enjoyable and therapeutic experience. Designed for both relaxation and socialization, the FL61000 can accommodate up to six individuals, making it perfect for family gatherings or intimate get-togethers with friends.

One of the standout features of the Jacuzzi FL61000 is its powerful hydrotherapy system. The hot tub is equipped with strategically placed jets that provide targeted massage to various muscle groups throughout the body. With a variety of jet types, including rotating and directional jets, users can customize their massage experience according to individual needs.

The FL61000 also boasts an advanced water management system, which enhances the quality and clarity of water. Equipped with a filtration system that uses enhanced sanitation technologies, including ozone purification, the hot tub minimizes chemical usage while ensuring clean and safe water. This gives users peace of mind while they indulge in relaxation.

In terms of design, the Jacuzzi FL61000 is aesthetically pleasing with its sleek, modern lines and available in several stylish colors that can complement any outdoor space. Its durable acrylic shell provides long-lasting beauty and is engineered to withstand various weather conditions. The hot tub is framed with a robust composite base, ensuring longevity and stability.

Energy efficiency is another hallmark of the FL61000. It features an insulating cover that reduces heat loss, ensuring that energy costs are kept low. The hot tub is also equipped with an energy-efficient pump that minimizes electricity consumption without compromising performance.

Additional technologies integrated into the Jacuzzi FL61000 enhance user convenience and enjoyment. The intuitive control panel allows for easy customization of temperature, jet speed, and lighting. Some models even support smart technology, offering remote access through mobile devices for added flexibility.

Finally, safety features such as non-slip surfaces and easy-access steps ensure that users can enjoy the hot tub with peace of mind. Whether seeking relief from everyday stress or looking to create a social hub at home, the Jacuzzi FL61000 delivers a luxurious experience that can be enjoyed year-round.
Top Page Image Contents