ENGLISH
UNDERMOUNT TUB INSTALLATION INSTRUCTIONS
Position the counter on top of the bath to ensure | COUNTER |
correct fit and appearance. Make any adjustments that |
|
may be necessary. Remove the counter. |
|
BATH
Adhering Counter to Bath
Ensure control panel cord (from underneath) is routed |
|
up through the control panel cutout in the counter and |
|
secured before gluing counter to tub. |
|
Clean any dirt or debris from the bath rim. Do not use |
|
abrasive cleaners. |
|
Where the counter will make contact with top of the | Control Panel |
bath rim, apply a bead of silicone sealant (not provided). | cord |
|
CAUTION: Do not use an adhesive or adhesive sealant to secure the counter to the bath rim. If maintenance or remodelling is required the counter may have to be removed. Adhesive will permanently
bond the counter to the bath. This will make removalCOUNTER difficult and costly and may cause damage to the
counter or bath.
BATH
Carefully position the counter onto the bath rim. The counter will need to be held in place while the sealant cures. Follow the manufacturer's instructions to deter- mine time required for curing.
WEIGHTS COUNTER
BATH
Apply a continuous bead of silicone sealant around the entire seam between the counter and bath rim. Allow sealant to skin over or cure before cleaning the counter or bath.
COUNTER
BATH RIM
APPLY
SILICONE
HERE
14
Jacuzzi Whirlpool Bath DE99000A 3/06