MAINTENANCE INSTRUCTIONS
ENGLISH
Suction Cover/Strainer Maintenance
Clean the suction cover/strainer of hair and debris when necessary. To do this, remove the center screw and detach the square cover. Clean the cover by backflushing debris from the holes. Replace the suction cover immediately after cleaning. When reinstalling, orient the cover/strainer with the small notch at the bottom. The gasket must be inserted into the groove of the cover/strainer before reinstalling onto the suction fitting.
CAUTION: Keep hair a minimum of 6 inches (15,2 cm) away from the suction fitting at all times when the whirl- pool system is operating. Hair longer than shoulder length should be secured close to the head, or a bathing cap should be worn. Do not operate the whirlpool system with the suction cover removed! It is a safety device and must always be in place on the suction fitting to mini- mize the potential hazard of hair and body entrapment.
SUCTION COVER/STRAINER ASSEMBLY
COVER STRAINER
SUCTION
FITTING
SCREW
NOTCHGASKET
Chromotherapy Lighting
If your unit has Chromotherapy (LED) lighting and the lights fail to function contact your Jacuzzi Whirlpool Bath dealer. There are no customer serviceable components on the Chro- motherapy lighting.
Replacement fixtures are available from your Jacuzzi Whirlpool Bath dealer.
LED LIGHT ASSEMBLY
LOCKING NUT
LIGHT BEZEL
SHELL
IllumatherapyTM Lighting
If your unit has IllumatherapyTM (fiberoptic) lighting and the lights fail to function contact your Jacuzzi Whirlpool Bath dealer. There are no customer serviceable components on the Illumatherapy lighting.
Replacement fixtures are available from your Jacuzzi Whirlpool Bath dealer.
JET WITH FIBEROPTIC LIGHTS
DIN BOX (MOUNTED
ONTO FIBERGLASS SHELL)
LOCKING NUT
LIGHT BEZEL
FIBEROPTIC CABLE (ROUTED TO WHIRLPOOL CONTROL BOX)
SHELL
FIBEROPTIC CABLES
ROUTED FROM JET TO DIN BOX
22
Jacuzzi Whirlpool Bath DE99000A 3/06