Invacare IH6300ADH manual Plumbing Installation

Page 23

SECTION 4—INSTALLATION

Plumbing Installation

WARNING

Be certain ALL plumbing work is performed by a qualified plumber.

Some state and local plumbing codes require the installation of a “reduced pressure zone” (RPZ) assembly on both the incoming hot and cold supply lines to prevent back flow contamination into the potable water system. Invacare recommends you check local plumbing code requirements to determine if RPZs are required on your tub installation. RPZs are NOT supplied by Invacare and are to be provided by the customer if required.

The hot water supply to the tub MUST NOT exceed 110o F (43° C) to protect the user from scalding.

CAUTION

Purge water lines. Hot and cold lines MUST be purged (blown down) to clear lines of debris prior to connection. Valves and spray heads may become inoperable and/ or damaged if lines are not properly cleared. Items damaged in this way are not covered under the warranty.

When operating water pressure exceeds 55 PSI, pressure regulators (similar to the ¾-inch Watts U5) MUST be installed.

NOTE: For this procedure, refer to FIGURE 4.6 on page 24.

1.Purge water lines. Hot and cold lines MUST be purged (blown down) prior to connection, to clear lines of debris.

2.Connect hot and cold supply lines to appropriate copper stubs found on back of tub (Detail “A” of FIGURE 4.6).

3.Install On/Off valves at wall and use unions between valves and stubs.

4.Connect drains in accordance with local plumbing codes.

5.Assemble hand held shower and disinfectant wands.

6.Check operation of tub according to operating instructions.

NOTE: Check local codes regarding maximum water temperature allowed at hot water outlets for facility type.

Part No 1096926

23

Supine Bath Tub

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Supine Bath Tub Accessories Warning Table of Contents Troubleshooting Limited Warranty Special Notes PAR9992 Label LocationTypical Product Parameters Fixed Height Adjustable HeightFeatures Plumbing InstallationGeneral Guidelines ElectricalElectrical Shock Hazard Maintenance and InspectionDisinfecting OperationGeneral Guidelines Disinfecting the TUB Disinfecting the Tub Using the Closed Loop SystemPreparing the Tub for Use OperationOverview Operating the Tub Using Water Temperature SettingFilling the Tub Using HydromassageOperating Shower/Massage Wand Lowering the Supine Tub Adjusting Tub Height Model IH6300ADH onlyRaising the Supine Tub Preparing the Work Area InstallationSecuring the Tub Securing the TubElectrical Hook-up Install the electrical hook‐ups per FigureElectrical Hook-up Electrical Installation Electrical InstallationPlumbing Hook-Up Install the plumbing hook‐ups per FigurePlumbing Installation Plumbing Installation and Schematic Before Each Use MaintenanceParts Information Safety Inspection Checklists InitiallyEvery Six Months Maintenance for IH6300ADH Adjustable Height only Glide PadsRemoving Soap Film and Hard Water Deposits Removing Calcium Deposits, Scale and Lime Build-upHeavy Duty Cleaning Procedure Calibrating the Disinfectant Flowmeter Calibrating the Disinfectant Flowmeter Maintenance Record Symptoms Faults Solution TroubleshootingUSA Limited Warranty

IH6300, IH6300ADH specifications

The Invacare IH6300ADH and IH6300 are advanced power wheelchairs designed to enhance mobility and independence for individuals with limited mobility. Featuring cutting-edge technology, these chairs are engineered to provide a safe, comfortable, and reliable mode of transportation for users.

One of the standout features of the Invacare IH6300 series is its robust and durable design. Built with a sturdy steel frame, these chairs can support a higher weight capacity, ensuring that they can accommodate a wide range of users. The ergonomic seating system provides optimal support and comfort during use, with adjustable seat depth and height options that cater to individual needs.

The IH6300ADH model takes comfort a step further with its enhanced cushioning and sophisticated suspension system, which absorbs shocks from uneven surfaces, allowing for a smoother ride. This is particularly beneficial for users who may travel over varied terrains or who may spend extended periods in their wheelchair.

Power and maneuverability are also key aspects of the Invacare IH6300 series. Both models come equipped with powerful motors that allow for swift movement and the ability to navigate inclines and tight spaces with ease. The intuitive joystick control enables users to operate the wheelchair effortlessly, offering precision in direction and speed.

Safety is paramount in the design of the IH6300 series. These wheelchairs feature intelligent braking systems that halt the chair when the joystick is released, preventing unintended movement. Additionally, the chairs are designed with anti-tip technology to enhance stability and prevent accidental falls.

The Invacare IH6300 series also boasts impressive battery life and efficiency, providing users with the freedom to travel longer distances without frequent recharging. The batteries are easily accessible for maintenance or replacement, ensuring ongoing reliability.

In summary, the Invacare IH6300ADH and IH6300 power wheelchairs stand out due to their exceptional build quality, user-friendly controls, and comprehensive safety features. They are ideal for individuals seeking mobility solutions that prioritize comfort, durability, and independence. With a range of options tailored to meet diverse user needs, the Invacare IH6300 series continues to be a leading choice in the realm of powered mobility devices.
Top Page Image Contents