Invacare manual Maintenance for IH6300ADH Adjustable Height only Glide Pads, Every Six Months

Page 26

SECTION 5—MAINTENANCE

Every Six Months

❑Verify the water flow temperature with a separate thermometer.

❑Visually inspect plumbing for leaks.

❑Check that all labels are present and legible. Replace if necessary.

❑IH6300ADH ONLY ‐ Re‐apply white lithium grease. Refer to Maintenance for IH6300ADH Adjustable Height ONLY Glide Pads on page 26.

Maintenance for IH6300ADH Adjustable Height ONLY Glide Pads

NOTE: For this procedure, refer to

FIGURE 5.1.

Glide Pad

NOTE: Glide pads require white lithium grease applied twice a year.

1. Remove side panel to access glide pads.

2. Generously apply white lithium grease to stainless steel rub panel.

3.Repeat STEPS 1‐2 for the opposite side.

4.Replace side panels.

Rub Panel

FIGURE 5.1 Maintenance for IH6300ADH

Adjustable Height ONLY Glide Pads

Removing Soap Film and Hard Water Deposits

Use a commercially available cleaner such as Invacare’s Heavy Duty Cleaner to thoroughly spray the exposed surfaces, including the openings of the tub jets and tub suction fitting. Use a long handled soft brush or similar product to wipe down all surfaces and allow the heavy duty cleaner to remain in contact with the exposed surfaces for approximately ten minutes. Rinse off surfaces using the shower wand, adjusted to spray position.

Removing Calcium Deposits, Scale and Lime Build-up

Spray a commercially available cleaner (full strength) for the intended application on all surfaces to be cleaned. Allow the cleaner to remain in contact with surfaces for at least five minutes to as long as 12 hours. Rinse off surfaces using the shower wand, adjusted to the spray position. Use the cleaner according to the manufacturer’s instructions.

Supine Bath Tub

26

Part No 1096926

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Supine Bath Tub Accessories Warning Table of Contents Troubleshooting Limited Warranty Special Notes Label Location PAR9992Fixed Height Adjustable Height Typical Product ParametersFeatures Electrical InstallationGeneral Guidelines PlumbingOperation Maintenance and InspectionDisinfecting Electrical Shock HazardGeneral Guidelines Disinfecting the Tub Using the Closed Loop System Disinfecting the TUBPreparing the Tub for Use OperationOverview Using Water Temperature Setting Operating the TubFilling the Tub Using HydromassageOperating Shower/Massage Wand Lowering the Supine Tub Adjusting Tub Height Model IH6300ADH onlyRaising the Supine Tub Installation Preparing the Work AreaSecuring the Tub Securing the TubInstall the electrical hook‐ups per Figure Electrical Hook-upElectrical Hook-up Electrical Installation Electrical InstallationInstall the plumbing hook‐ups per Figure Plumbing Hook-UpPlumbing Installation Plumbing Installation and Schematic Initially MaintenanceParts Information Safety Inspection Checklists Before Each UseRemoving Calcium Deposits, Scale and Lime Build-up Maintenance for IH6300ADH Adjustable Height only Glide PadsRemoving Soap Film and Hard Water Deposits Every Six MonthsHeavy Duty Cleaning Procedure Calibrating the Disinfectant Flowmeter Calibrating the Disinfectant Flowmeter Maintenance Record Troubleshooting Symptoms Faults SolutionLimited Warranty USA

IH6300, IH6300ADH specifications

The Invacare IH6300ADH and IH6300 are advanced power wheelchairs designed to enhance mobility and independence for individuals with limited mobility. Featuring cutting-edge technology, these chairs are engineered to provide a safe, comfortable, and reliable mode of transportation for users.

One of the standout features of the Invacare IH6300 series is its robust and durable design. Built with a sturdy steel frame, these chairs can support a higher weight capacity, ensuring that they can accommodate a wide range of users. The ergonomic seating system provides optimal support and comfort during use, with adjustable seat depth and height options that cater to individual needs.

The IH6300ADH model takes comfort a step further with its enhanced cushioning and sophisticated suspension system, which absorbs shocks from uneven surfaces, allowing for a smoother ride. This is particularly beneficial for users who may travel over varied terrains or who may spend extended periods in their wheelchair.

Power and maneuverability are also key aspects of the Invacare IH6300 series. Both models come equipped with powerful motors that allow for swift movement and the ability to navigate inclines and tight spaces with ease. The intuitive joystick control enables users to operate the wheelchair effortlessly, offering precision in direction and speed.

Safety is paramount in the design of the IH6300 series. These wheelchairs feature intelligent braking systems that halt the chair when the joystick is released, preventing unintended movement. Additionally, the chairs are designed with anti-tip technology to enhance stability and prevent accidental falls.

The Invacare IH6300 series also boasts impressive battery life and efficiency, providing users with the freedom to travel longer distances without frequent recharging. The batteries are easily accessible for maintenance or replacement, ensuring ongoing reliability.

In summary, the Invacare IH6300ADH and IH6300 power wheelchairs stand out due to their exceptional build quality, user-friendly controls, and comprehensive safety features. They are ideal for individuals seeking mobility solutions that prioritize comfort, durability, and independence. With a range of options tailored to meet diverse user needs, the Invacare IH6300 series continues to be a leading choice in the realm of powered mobility devices.
Top Page Image Contents