Invacare 3650, 3600XL manual Securing Tub

Page 16

SECTION 2—PARTS AND INSTALLATION

Securing Tub

NOTE: For this procedure, refer to FIGURE 2.2.

1.Set the tub in place.

2.Ensure plumbing and electrical hook‐ups have been installed. Refer to Electrical and Plumbing Hook‐up Locations on the Tub on page 17, Electrical Installation on page 17 and Plumbing Installation on page 20 to ensure the proper hook‐ups have been installed before securing the tub.

3.Mark location of anchor holes, using pre‐drilled holes in leg mounting pads as a template.

4.Move tub away from mounting area.

WARNING

Protective eye wear MUST be worn when drilling to avoid possible eye injury.

5.Drill anchor holes in floor. Use jack‐drill and carbide bit in concrete or a wood bit for wood floors.

6.Reposition the tub in mounting area, aligning the holes in the leg mounting pads with the holes drilled in STEP 4.

WARNING

DO NOT adjust height of legs more than 1 inch (25.4 mm) for Model 3650 or 2 inches (50.8 mm) for Models 3600 and 3600XL; leg will disassemble from leg mounting pad and serious injury may occur.

7.Level the tub by adjusting the telescopic legs either up or down, using a wrench, to arrive at the desired height.

8.Check to make sure tub is level by placing a level on the front and sides of the tub.

9.Repeat STEPS 6 and 7 until tub is level.

10.Secure legs to floor using fasteners appropriate to the floor material and in keeping with any local codes.

LEVELING SIDE TO SIDE

Level

Securing Legs to Floor

LEVELING END TO END

Level

Maximum Adjustment

1-inch (25.4 mm) for Model 3650)

2-inch (50.8 mm) for Models 3600 and 3600XL

Lag Bolt

Leg

LegMounting

Pad

Lag

Bolt

Anchors

FIGURE 2.2 Securing Tub

Side Entry Whirlpool Tub

16

Part No 1118387

Image 16
Contents Side Entry Whirlpool Tub Accessories Warning Table of Contents Limited Warranty Maintenance Special NotesLabel Location Cabinet Door 3600XLTypical Product Parameters ModelFeatures Models 3600 and 3600XLModel Installation Important Safety InstructionsGeneral Guidelines Electrical PlumbingMaintenance and Inspection DisinfectingGeneral Guidelines Parts Installation About InstallationParts Information Preparing the Work AreaPreparing the Work Area Securing Tub Securing TubElectrical Installation Electrical and Plumbing Hook-up Locations on the TubParts and Installation Electrical Installation Plumbing Installation Post Installation Checklist Plumbing InstallationOperating Instructions OverviewDisinfecting the Tub Using the Closed Loop System Opening the Tub Door Opening/Closing the Tub DoorClosing the Tub Door Water Temperature Setting Tub OperationOperating Shower/Massage Wand Filling TubHydromassage Filling TubSafety INSPECTION/ Troubleshooting Safety Inspection ChecklistsCleaning Cleaning the Door Seal GasketCleaning Your Tub Removing Soap Film and Hard Water DepositsHeavy Duty Cleaning Procedure Required OZCalibrating the Disinfectant Flow Meter Safety INSPECTION/TROUBLESHOOTING Troubleshooting Symptoms Faults SolutionMaintenance Record Side Entry Whirlpool Tub Limited Warranty USA
Related manuals
Manual 36 pages 42.37 Kb

3600XL, 3600, 3650 specifications

Invacare is a renowned name in the healthcare industry, providing innovative solutions for individuals with mobility challenges. Among its notable offerings are the Invacare 3600, 3650, and 3600XL models, which are designed to improve the quality of life for users while ensuring ease of use and safety.

The Invacare 3600 is engineered for users who require a reliable and comfortable wheelchair. It features a lightweight aluminum frame, which contributes to its portability and ease of maneuverability. The user-friendly design incorporates adjustable armrests and footrests, allowing for customized comfort tailored to individual needs. With a seat width of up to 20 inches, it accommodates various body types while maintaining stability. The Invacare 3600 also includes durable, puncture-resistant tires that are designed for both indoor and outdoor surfaces, ensuring users can navigate various terrains without hassle.

The Invacare 3650 offers even more advanced features, making it suitable for users who need enhanced support and comfort. This model boasts a higher weight capacity and a reinforced frame, allowing it to accommodate larger users without compromising safety. The 3650 also integrates a unique folding mechanism, making it incredibly easy to transport and store. Its adjustable backrest provides additional comfort for longer periods of sitting, while the breathable upholstery minimizes the risk of skin irritation.

For those requiring additional room and support, the Invacare 3600XL is the optimal choice. This model features an extra-wide seating area and a robust design that supports heavier users. The 3600XL includes enhanced stability features, such as a wider wheelbase and a reinforced chassis, ensuring safety during use. Like its counterparts, the 3600XL maintains a foldable structure for easy transport, but it also comes equipped with advanced shock-absorbing components that provide a smoother ride across various surfaces.

All three models utilize cutting-edge technologies designed to improve user experience. Features such as adjustable components, enhanced seating systems, and lightweight materials all contribute to a product range that prioritizes user comfort and safety. Invacare’s commitment to quality ensures these wheelchairs not only meet but exceed industry standards, making them a trusted choice for individuals with mobility challenges. With their combination of comfort, durability, and innovative design, the Invacare 3600, 3650, and 3600XL models stand out in the market, empowering users to navigate their environments with confidence and ease.