Plumbing Installation

SECTION 2—PARTS AND INSTALLATION

DANGER

Be certain all plumbing work is performed by a qualified plumber and is in compliance with local codes.

WARNING

Some state and local plumbing codes require the installation of a “reduced pressure zone” (RPZ) assembly on both the incoming hot and cold supply lines to prevent back flow contamination into the potable water system. Invacare recommends you check local plumbing code requirements to determine if RPZs are required on your tub installation. RPZs are NOT supplied by Invacare and are to be provided by the customer if required.

The hot water supply to the tub MUST NOT exceed 110° F (46° C) to protect the user from scalding.

CAUTION

Purge water lines. Hot and cold lines MUST be purged (blown down) to clear lines of debris prior to connection. Valves and spray heads may become inoperable and/ or damaged if lines are not properly cleared. Items damaged in this way are not covered under the warranty.

When operating water pressure exceeds 55 PSI, pressure regulators (similar to the ¾-inch Watts U5) MUST be installed.

NOTE: For this procedure, refer to FIGURE 2.5 on page 21.

1.Refer to Electrical and Plumbing Hook‐up Locations on the Tub on page 17 for the location of the hot water stub and cold water stub.

2.Measure the location of the drain on the unit.

3.Install the drain in the floor in the appropriate location determined in STEP 2.

4.Purge water lines. Hot and cold lines MUST be purged (blown down) prior to connection, to clear lines of debris.

5.Install On/Off valves at wall and use unions between valves and stubs.

6.Connect hot and cold supply lines to ¾‐inch copper pipes found on back of tub in accordance with applicable building codes.

7.Connect 2‐inch drains in accordance with local plumbing codes.

8.Assemble hand held shower and disinfectant wands. Be sure to use the washers supplied.

CAUTION

DO NOT run pump without water in the tub. Serious damage could result. Pump requires water for cooling.

Side Entry Whirlpool Tub

Part No 1118387

3600XL, 3600, 3650 specifications

Invacare is a renowned name in the healthcare industry, providing innovative solutions for individuals with mobility challenges. Among its notable offerings are the Invacare 3600, 3650, and 3600XL models, which are designed to improve the quality of life for users while ensuring ease of use and safety.

The Invacare 3600 is engineered for users who require a reliable and comfortable wheelchair. It features a lightweight aluminum frame, which contributes to its portability and ease of maneuverability. The user-friendly design incorporates adjustable armrests and footrests, allowing for customized comfort tailored to individual needs. With a seat width of up to 20 inches, it accommodates various body types while maintaining stability. The Invacare 3600 also includes durable, puncture-resistant tires that are designed for both indoor and outdoor surfaces, ensuring users can navigate various terrains without hassle.

The Invacare 3650 offers even more advanced features, making it suitable for users who need enhanced support and comfort. This model boasts a higher weight capacity and a reinforced frame, allowing it to accommodate larger users without compromising safety. The 3650 also integrates a unique folding mechanism, making it incredibly easy to transport and store. Its adjustable backrest provides additional comfort for longer periods of sitting, while the breathable upholstery minimizes the risk of skin irritation.

For those requiring additional room and support, the Invacare 3600XL is the optimal choice. This model features an extra-wide seating area and a robust design that supports heavier users. The 3600XL includes enhanced stability features, such as a wider wheelbase and a reinforced chassis, ensuring safety during use. Like its counterparts, the 3600XL maintains a foldable structure for easy transport, but it also comes equipped with advanced shock-absorbing components that provide a smoother ride across various surfaces.

All three models utilize cutting-edge technologies designed to improve user experience. Features such as adjustable components, enhanced seating systems, and lightweight materials all contribute to a product range that prioritizes user comfort and safety. Invacare’s commitment to quality ensures these wheelchairs not only meet but exceed industry standards, making them a trusted choice for individuals with mobility challenges. With their combination of comfort, durability, and innovative design, the Invacare 3600, 3650, and 3600XL models stand out in the market, empowering users to navigate their environments with confidence and ease.