Husqvarna 1365GN owner manual Cold Weather Operation, Permanent Cold Weather Shelter

Page 10

Operation

6.Connect battery charge cable clamp with black handle to the negative (–)battery terminal (Figure 5).

7.Start engine. Let engine run while battery recharges.

8.When battery has charged, shut down engine

NOTE: Use an automotive hydrometer to test battery state of charge and condition. Follow the hydrometer manufacturer’s instructions carefully. Generally, a battery is considered to be at 100% state of charge when specific gravity of its fluid (as measured by hydrometer) is 1.260 or higher.

COLD WEATHER

OPERATION

Under certain weather conditions (temperatures below 40°F [4°C] and a high dew point), your generator may experience icing of the carburetor and/or the crankcase breather system.

Build a structure that will enclose three sides and the top of the generator:

1.Make sure entire muffler-side of generator is exposed. Note that your generator may appear different from that shown in Figure 6.

Figure 6 — Permanent Cold Weather Shelter

Wind

2.Ensure a minimum of two feet clearance between open side of box and nearest object.

3.Face exposed end away from wind and elements.

4.Enclosure should hold enough heat created by generator to prevent problems.

DANGER

Running generator gives off carbon monoxide, an odorless, colorless, poison gas.

Breathing carbon monoxide will cause nausea, fainting or death.

•Operate generator ONLY outdoors.

•Keep at least 2 feet of clearance on all sides of generator for adequate ventilation.

•DO NOT operate generator inside any building or enclosure, including the generator compartment of a recreational vehicle (RV).

•Remove generator from shelter when temperature is above 40°F [4°C].

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents 1365GN Safety Rules Table of ContentsEquipment Description Generator produces powerful voltage Unintentional sparking can result in fire or electric shock Volt AC, 20 Amp Gfci Duplex Receptacles Know Your GeneratorVolt DC,10 Amp Receptacle Recharge a discharged 120/240 Volt AC, 30 Amp Locking Receptacle MayInstall Wheel Kit AssemblyCarton Contents Remove Generator From CartonEngine Before StartingAdd Engine Oil and Fuel Operating Generator Grounding GeneratorStarting the Engine Stopping the Engine Connecting Electrical LoadsCharging a Battery Operating Automatic Idle ControlCold Weather Operation Permanent Cold Weather ShelterVolt AC, 20 Amp, Gfci Duplex Receptacles Receptacles120/240 Volt AC, 30 Amp, Locking Receptacle Volt DC, 10 Amp ReceptacleGround Fault Protection Testing the GfciCapacity Power ManagementDont Overload Generator ExampleEngine Maintenance SpecificationsGeneral Maintenance Recommendations Generator CleaningGenerator Storage StorageEngine Storage Other Storage Tips Page Troubleshooting Schematic Wiring Diagram Exploded View Main Unit Description Parts List Main UnitParts Not Illustrated Exploded View and Parts List Alternator Exploded View and Parts List Control Panel Exploded View and Parts List Wheel KIT Equipment Consumer Use Commercial Use Pressure Washer About your equipment warrantyPortable Generator

1365GN specifications

The Husqvarna 1365GN is a robust and highly efficient chainsaw designed for both professional users and serious enthusiasts. Built with innovation in mind, this model is particularly suited for demanding environments, combining power, durability, and user-friendly features that make it stand out in the market.

One of the main features of the Husqvarna 1365GN is its powerful engine, which delivers impressive performance for a variety of cutting tasks. With a high displacement engine, the chainsaw offers exceptional torque and cutting speeds, making it ideal for felling large trees, limbing, and heavy-duty cutting operations. The engine is designed to be fuel-efficient, helping users save on fuel costs while reducing emissions, adhering to modern environmental standards.

The 1365GN is equipped with advanced technologies that enhance its usability and performance. The AutoTune feature automatically adjusts the fuel-air mixture for optimal performance in different operating conditions, ensuring the machine runs smoothly regardless of the altitude, temperature, or fuel quality. This self-adjusting technology not only simplifies starter adjustments but also contributes to maintaining engine efficiency and longevity.

Another notable characteristic of the Husqvarna 1365GN is its ergonomic design. The chainsaw features an anti-vibration system that significantly reduces vibrations experienced by the operator, enabling extended use without discomfort. The lightweight construction ensures ease of handling, while the comfortable grip allows for better control during operation, providing safety and precision.

Safety is paramount in any power tool, and the Husqvarna 1365GN is fitted with several safety features that protect users during operation. The chain brake system is designed to stop the chain immediately in the event of a kickback, preventing potential accidents. Additionally, the chainsaw includes a low kickback bar and chain, enhancing overall safety without compromising cutting efficiency.

In terms of maintenance, the 1365GN is designed for easy access to key components, facilitating quick and hassle-free servicing. The air filter can be easily accessed and replaced, ensuring that the engine remains clean, which is vital for optimal performance and longevity.

Overall, the Husqvarna 1365GN exemplifies quality and reliability, being a perfect choice for those seeking a powerful, efficient, and safe chainsaw. Whether you're a professional logger or a tree care specialist, this chainsaw offers performance and features that meet the rigorous demands of any cutting task.
Top Page Image Contents