Homelite UT13120 Installing the Grass Catcher, Setting Blade Height, To set the blade height

Page 11

ASSEMBLY

INSTALLING THE GRASS CATCHER

(MODEL UT13120 ONLY)

See Figure 6.

NOTE: When using the grass catcher, do not install either the side discharge deflector or the mulching plug.

Lift the rear discharge door.

Lift the grass catcher by its handle and place under the rear discharge door so that the hooks on the grass catcher are seated on the door rod.

Release the rear discharge door. When installed correctly, the hooks on the grass catcher will extend through the openings on the rear discharge door.

SETTING BLADE HEIGHT

See Figure 7.

When shipped, the wheels on the mower are set to a low- cutting position. Before using the mower for the first time, adjust the cutting position to the height best suited for your lawn. The average lawn should be between 1-1/2 in. to 2 in. during cool months and between 2 in. and 3-1/4 in. during hot months.

To set the blade height:

To raise the blade height, grasp the height adjustment lever and move it toward the back of the mower.

To lower the blade height, grasp the height adjustment lever and move it toward the front of the mower.

MODEL UT13120 ONLY

GRASS CATCHER

HANDLE

 

 

HOOKS

REAR

 

DISCHARGE

 

DOOR

OPENINGS

DOOR ROD

Fig. 6

 

HEIGHT

ADJUSTMENT

LEVER

 

LOWEST

 

BLADE

HIGHEST

SETTING

BLADE SETTING

Fig. 7

 

Page 11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Save this Manual for Future Reference OPERATOR’S ManualIntroduction Table of ContentsRead ALL Instructions General Safety RulesSpecific Safety Rules Name DESIGNATION/EXPLANATION SymbolsSymbol Signal Meaning ServiceElectrical Connection Cord Length Wire Size A.W.GElectrical Double InsulationUT13120 FeaturesProduct Specifications UT13118Assembly Installing the Mulching Plug Adjusting HandleInstalling Side Discharge Deflector To set the blade height Installing the Grass CatcherSetting Blade Height Door ROD Height Adjustment LeverMowing Tips OperationApplications STARTING/STOPPING the MowerEmptying the Grass Catcher Model UT13120 only Slope OperationLubrication MaintenanceGeneral Maintenance Replacing the Cutting BladeTo check the blade balance FAN Assembly Shaft Blade SpacerSharpening the Blade Balancing the BladeTo lower the handle before storing Replacing WheelsStoring the Mower To replace a wheelProblem Possible Cause Solution TroubleshootingKey Part Description Qty Exploded VIEW/PARTS ListModel UT13118 Key Part Description This Warranty is not Transferable and does not Cover Warranty Limited Warranty for Corded Electric ModelsPage Homelite Consumer PRODUCTS, INC

UT13120, UT13118 specifications

The Homelite UT13118 and UT13120 are two standout models in the domain of consumer-grade string trimmers, showcasing advanced design, power, and functionality intended for efficiency in lawn care. Both models cater to homeowners and garden enthusiasts looking for reliability and ease of use in maintaining their lawns.

The UT13118 features a robust 26cc two-cycle engine, delivering impressive power for various trimming tasks. Its lightweight structure allows for easy maneuverability, which is particularly valuable during extended periods of use. This model comes equipped with a 17-inch cutting width, enabling it to cover large areas efficiently while providing a clean finish. One of the significant highlights is its automatic feed spool system, which ensures a continuous supply of trimming line, minimizing downtime for users.

In contrast, the UT13120 is slightly more powerful with a 31cc engine. This additional power translates into enhanced cutting performance, making it suitable for tougher shrubs and thicker grass. The design follows an ergonomic approach, featuring a fully adjustable handle that accommodates various user heights and preferences, promoting comfort during prolonged operation. Like the UT13118, the UT13120 is equipped with a 17-inch cutting width, ensuring efficiency in every pass.

Both models utilize a quick-start technology that allows for easy ignition, reducing the hassle of traditional pull-starts. This feature is particularly appreciated by users seeking convenience without sacrificing performance. The trimmers boast a dual-line bump feed head that not only increases cutting versatility but also simplifies the process of replacing the trimming line.

Additionally, the Homelite UT13118 and UT13120 models are designed with durability in mind. Made from high-quality materials, they withstand the rigors of outdoor use while requiring minimal maintenance. Their compact designs facilitate easy storage and transport, making them practical choices for residential users.

Overall, the Homelite UT13118 and UT13120 are exemplary choices for those in search of a dependable, efficient, and user-friendly string trimmer. Whether you’re maintaining a small garden or tackling larger lawns, both models promise to deliver optimal results, ensuring that your outdoor space remains well-groomed and inviting.
Top Page Image Contents