Homelite UT13120, UT13118 manual Double Insulation, Electrical Connection, Extension Cords

Page 7

ELECTRICAL

DOUBLE INSULATION

Double insulation is a concept in safety in electric power tools, which eliminates the need for the usual three- wire grounded power cord. All exposed metal parts are isolated from the internal metal motor components with protecting insulation. Double insulated tools do not need to be grounded.

It is possible to tie the extension cord and power cord in a knot to prevent them from becoming disconnected during use. Make the knot as shown in figure 1, then connect the plug end of the power cord into the receptacle end of the extension cord. This method can also be used to tie two extension cords together.

WARNING:

The double insulated system is intended to protect the user from shock resulting from a break in the tool’s internal insulation. Observe all normal safety precautions to avoid electrical shock.

NOTE: Servicing of a product with double insulation requires extreme care and knowledge of the system and should be performed only by a qualified service technician. For service, we suggest you return the product to your nearest authorized service center for repair. Always use original factory replace- ment parts when servicing.

ELECTRICAL CONNECTION

This product has a precision-built electric motor. It should be connected to a power supply that is 120 volts, 60 Hz, AC only (normal household current). Do not operate this product on direct current (DC). A substantial voltage drop will cause a loss of power and the motor will overheat. If the product does not operate when plugged into an outlet, double-check the power supply.

EXTENSION CORDS

See Figure 1.

When using a power tool at a considerable distance from a power source, be sure to use an extension cord that has the capacity to handle the current the product will draw. An undersized cord will cause a drop in line voltage, resulting in overheating and loss of power. Use the chart to determine the minimum wire size required in an extension cord. Only round jacketed cords listed by Underwriter’s Laboratories (UL) should be used.

When working outdoors with a product, use an extension cord that is designed for outside use. This type of cord is designated with “WA” on the cord’s jacket.

Before using any extension cord, inspect it for loose or exposed wires and cut or worn insulation.

Fig. 1

**Ampere rating (on product data plate)

0-2.0 2.1-3.4 3.5-5.0 5.1-7.0 7.1-12.0 12.1-16.0

Cord Length

 

Wire Size (A.W.G.)

 

 

 

 

 

 

 

 

 

25'

16

16

16

16

14

14

 

 

 

 

 

 

 

50'

16

16

16

14

14

12

 

 

 

 

 

 

 

100'

16

16

14

12

10

—

 

 

 

 

 

 

 

**Used on 12 gauge - 20 amp circuit. NOTE: AWG = American Wire Gauge

WARNING:

Keep the extension cord clear of the working area. Position the cord so that it will not get caught on lumber, tools, or other obstructions while you are working with a power tool. Failure to do so can result in serious personal injury.

WARNING:

Check extension cords before each use. If damaged replace immediately. Never use the product with a damaged cord since touching the damaged area could cause electrical shock resulting in serious injury.

Page 7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Save this Manual for Future Reference OPERATOR’S ManualIntroduction Table of ContentsRead ALL Instructions General Safety RulesSpecific Safety Rules Name DESIGNATION/EXPLANATION SymbolsSymbol Signal Meaning ServiceElectrical Connection Cord Length Wire Size A.W.GElectrical Double InsulationUT13120 FeaturesProduct Specifications UT13118Assembly Installing Side Discharge Deflector Adjusting HandleInstalling the Mulching Plug To set the blade height Installing the Grass CatcherSetting Blade Height Door ROD Height Adjustment LeverMowing Tips OperationApplications STARTING/STOPPING the MowerEmptying the Grass Catcher Model UT13120 only Slope OperationLubrication MaintenanceGeneral Maintenance Replacing the Cutting BladeTo check the blade balance FAN Assembly Shaft Blade SpacerSharpening the Blade Balancing the BladeTo lower the handle before storing Replacing WheelsStoring the Mower To replace a wheelProblem Possible Cause Solution TroubleshootingModel UT13118 Exploded VIEW/PARTS ListKey Part Description Qty Key Part Description This Warranty is not Transferable and does not Cover Warranty Limited Warranty for Corded Electric ModelsPage Homelite Consumer PRODUCTS, INC

UT13120, UT13118 specifications

The Homelite UT13118 and UT13120 are two standout models in the domain of consumer-grade string trimmers, showcasing advanced design, power, and functionality intended for efficiency in lawn care. Both models cater to homeowners and garden enthusiasts looking for reliability and ease of use in maintaining their lawns.

The UT13118 features a robust 26cc two-cycle engine, delivering impressive power for various trimming tasks. Its lightweight structure allows for easy maneuverability, which is particularly valuable during extended periods of use. This model comes equipped with a 17-inch cutting width, enabling it to cover large areas efficiently while providing a clean finish. One of the significant highlights is its automatic feed spool system, which ensures a continuous supply of trimming line, minimizing downtime for users.

In contrast, the UT13120 is slightly more powerful with a 31cc engine. This additional power translates into enhanced cutting performance, making it suitable for tougher shrubs and thicker grass. The design follows an ergonomic approach, featuring a fully adjustable handle that accommodates various user heights and preferences, promoting comfort during prolonged operation. Like the UT13118, the UT13120 is equipped with a 17-inch cutting width, ensuring efficiency in every pass.

Both models utilize a quick-start technology that allows for easy ignition, reducing the hassle of traditional pull-starts. This feature is particularly appreciated by users seeking convenience without sacrificing performance. The trimmers boast a dual-line bump feed head that not only increases cutting versatility but also simplifies the process of replacing the trimming line.

Additionally, the Homelite UT13118 and UT13120 models are designed with durability in mind. Made from high-quality materials, they withstand the rigors of outdoor use while requiring minimal maintenance. Their compact designs facilitate easy storage and transport, making them practical choices for residential users.

Overall, the Homelite UT13118 and UT13120 are exemplary choices for those in search of a dependable, efficient, and user-friendly string trimmer. Whether you’re maintaining a small garden or tackling larger lawns, both models promise to deliver optimal results, ensuring that your outdoor space remains well-groomed and inviting.
Top Page Image Contents