Homelite UT50500, UT50901 Replacing the Debris Flap, Attaching the Storage Hanger, Spark Arrestor

Page 14

MAINTENANCE

Using a 1/2 in. socket wrench, turn the blade nut coun- terclockwise onto the edger shaft and tighten securely.

NOTE:  Always make sure the blade is correctly installed and securely fastened before each use.

replacing the DEBRIS FLAP

See Figure 12.

Replace the debris flap if it is worn.

Stop the engine. Disconnect the spark plug wire and move it away from spark plug.

Using a 10 mm wrench or socket, remove the hex nuts, washers, and debris flap.

Install the new debris flap. This replacement part is

available­ from the place of purchase, or by calling 1-800-242-4672.

Replace washers and hex nuts.

Tighten securely.

ATTACHING THE STORAGE HANGER

See Figure 13.

There are two ways to hang the attachment for storage.

To use the hanger cap, push in the button and place the hanger cap over end of the lower end attachment shaft. Slightly rotate the cap from side to side until the button locks into place.

The secondary hole in the attachment shaft can be used for hanging purposes as well.

CLEANING THE EXHAUST PORT

Depending on the type of fuel used, the type and amount of lubricant used, and/or your operating conditions, the exhaust port may become blocked with carbon deposits. If you notice a power loss with your gas powered tool, you may need to remove these deposits to restore performance. We highly recommend that only qualified service technicians perform this service.

SPARK ARRESTOR

The spark arrestor must be cleaned or replaced every 25 hours or yearly to ensure proper performance of the prod- uct. Spark arrestors may be in different locations depend- ing on the model purchased. Please contact your nearest service center to have the spark arrestor on your product serviced.

hex nut

edger guard

 

washer

debris flap

Fig. 12

HANGER

CAP

HOLE

SECONDARY

HOLE

BUTTON

Fig. 13

Page 14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Save this Manual for Future Reference ALL VersionsTable of Contents IntroductionRead all instructions  Danger Rotating Cutting MemberSpecific Safety Rules Symbols Symbol Name ExplanationService Symbol Signal MeaningFeatures Product SpecificationsUnpacking AssemblyTOP-MOUNTED Motor Packing ListFront Handle Removing the attachment from the power headAttaching the Front handle BoltFuel Mixture OperationApplications Filling TankIf assistance is required Starting this product Using the EdgerTo Stop the Engine Operating TipsBlade Depth Adjusting Depth of CUTSee Figures 7 Replacing the blade MaintenanceGeneral Maintenance See Figures 9Attaching the Storage Hanger Cleaning the Exhaust PortReplacing the Debris Flap Spark ArrestorSpark Plug Cleaning the AIR Filter ScreenFuel CAP STORing the productTroubleshooting Air Filter Screen earlier in thisScrew Warranty Limited Warranty StatementYour Warranty Rights and Obligations AIR Filter Assy Emissions Maintenance Schedule and Warranted Parts ListThis product was manufactured with a catalyst muffler Fuel Tank AssyPage Parts and Service California Proposition

UT50901, UT50500 specifications

The Homelite UT50500 and UT50901 are two powerful electric string trimmers designed to meet the varied needs of both residential and light commercial users. Known for their reliability and efficiency, these models incorporate innovative technologies and user-friendly features that make yard maintenance a breeze.

At the heart of the Homelite UT50500 is its robust 5.0 Amp motor, providing ample power to tackle tough weeds and overgrown grass. The UT50901, on the other hand, boasts a slightly more powerful 6.5 Amp motor, allowing it to handle heavier vegetation with ease. Both models feature a lightweight design, ensuring that users can maneuver the trimmers comfortably without causing undue strain during extended use.

One of the standout features of the UT50500 and UT50901 is their automatic line feed system. This technology ensures that the trimming line is fed smoothly and efficiently, reducing downtime and enhancing productivity. Users can switch between different cutting widths, with the ability to adjust the cutting path to either 12 inches or 15 inches, catering to various tasks, from edging to trimming.

The trimmers are equipped with a telescopic shaft that can be easily adjusted to accommodate users of varying heights. This feature is critical for user comfort and ensures that anyone can use the trimmer without difficulty. Additionally, the ergonomic handle is designed to provide a comfortable grip and reduce vibration, allowing for extended use without fatigue.

Another notable characteristic of the Homelite UT50500 and UT50901 is their dual-line capability, allowing for more efficient cutting. This feature not only enhances cutting performance but also reduces the amount of time needed to complete trimming tasks. Furthermore, both models are designed for easy string replacement, making maintenance straightforward and quick.

Safety is also a priority, with both trimmers featuring a protective guard that shields users from debris while they work. The lightweight build, combined with the safety features, makes these trimmers suitable for homeowners and professionals alike.

In conclusion, the Homelite UT50500 and UT50901 offer an impressive combination of power, functionality, and ease of use. With their effective motor performance, adjustable features, and user-centric design, these electric string trimmers are excellent choices for anyone looking to maintain a neat and tidy outdoor space. Whether tackling stubborn weeds or simply maintaining the edges of your lawn, these trimmers make yard work an efficient and manageable task.
Top Page Image Contents