Homelite UT50500, UT50901 manual Specific Safety Rules

Page 4

important safety instructions

Service on the product must be performed by qualified repair personnel only. Service or maintenance performed by unqualified personnel could result in injury to the user or damage to the product.

Use only identical replacement parts when servicing the product. Use of unauthorized parts may create a risk of serious injury to the user, or damage to the product.

SPECIFIC SAFETY RULES

Be sure all guards are properly and securely attached.

Replace dull or worn blade; do not attempt to sharpen.

Use this edger for edging along sidewalks, driveways, flower beds, and similar areas. Do not use for any other purpose.

Do not use the edger on or near graveled surfaces.

Start engine carefully. Make certain all attachments are disengaged before attempting to start. Keep hands, feet, clothing, and the like away from blade and moving parts.

If the edger strikes any type of foreign object:

a)Stop the edger and remove the spark plug wire or disconnect from the power supply.

b)Inspect for damage to the edger attachment.

c)Correct damage before using the edger attachment. Failure to do so can cause serious injury.

Make yourself familiar with the area you are edging. Be aware of uneven sidewalks and holes in the terrain as well as other similar hazardous conditions (example: wire or wire rope which can break off and become a dangerous projectile). Always push the edger attachment slowly over rough ground.

Never direct discharge of material toward bystanders or allow anyone near the area of operation. Use care in di- recting discharge to avoid glass enclosures, automobiles, and the like.

Always stop the engine and remove the spark plug wire or disconnect from power supply before attempting to remove any obstruction caught or jammed in the blade, installing attachment, or making any adjustments.

To reduce the risk of fire, do not allow excessive grass, leaves, or grease to accumulate on the product.

Do not attempt to remove cut material nor hold material to be cut when the engine is running or when the cutting blade is moving.

Always keep your right hand on the rear handle and your left hand on the front handle when the blade is rotating.

A coasting blade can cause injury while it continues to spin after the engine is stopped or throttle trigger released. Maintain proper control until the blade has completely stopped rotating.

Take all possible precautions when leaving the product unattended. Disengage attachments, shift into neutral, and stop engine.

Save these instructions. Refer to them frequently and use them to instruct others who may use this tool. If you loan someone this tool, loan them these instructions also to prevent misuse of the product and possible injury.

Page 

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Save this Manual for Future Reference ALL VersionsTable of Contents IntroductionRead all instructions  Danger Rotating Cutting MemberSpecific Safety Rules Symbols Symbol Name ExplanationService Symbol Signal MeaningFeatures Product SpecificationsAssembly TOP-MOUNTED MotorUnpacking Packing ListRemoving the attachment from the power head Attaching the Front handleFront Handle BoltOperation ApplicationsFuel Mixture Filling TankUsing the Edger To Stop the EngineIf assistance is required Starting this product Operating TipsSee Figures 7 Adjusting Depth of CUTBlade Depth Maintenance General MaintenanceReplacing the blade See Figures 9Cleaning the Exhaust Port Replacing the Debris FlapAttaching the Storage Hanger Spark ArrestorCleaning the AIR Filter Screen Fuel CAPSpark Plug STORing the productTroubleshooting Air Filter Screen earlier in thisScrew Warranty Limited Warranty StatementYour Warranty Rights and Obligations Emissions Maintenance Schedule and Warranted Parts List This product was manufactured with a catalyst mufflerAIR Filter Assy Fuel Tank AssyPage Parts and Service California Proposition

UT50901, UT50500 specifications

The Homelite UT50500 and UT50901 are two powerful electric string trimmers designed to meet the varied needs of both residential and light commercial users. Known for their reliability and efficiency, these models incorporate innovative technologies and user-friendly features that make yard maintenance a breeze.

At the heart of the Homelite UT50500 is its robust 5.0 Amp motor, providing ample power to tackle tough weeds and overgrown grass. The UT50901, on the other hand, boasts a slightly more powerful 6.5 Amp motor, allowing it to handle heavier vegetation with ease. Both models feature a lightweight design, ensuring that users can maneuver the trimmers comfortably without causing undue strain during extended use.

One of the standout features of the UT50500 and UT50901 is their automatic line feed system. This technology ensures that the trimming line is fed smoothly and efficiently, reducing downtime and enhancing productivity. Users can switch between different cutting widths, with the ability to adjust the cutting path to either 12 inches or 15 inches, catering to various tasks, from edging to trimming.

The trimmers are equipped with a telescopic shaft that can be easily adjusted to accommodate users of varying heights. This feature is critical for user comfort and ensures that anyone can use the trimmer without difficulty. Additionally, the ergonomic handle is designed to provide a comfortable grip and reduce vibration, allowing for extended use without fatigue.

Another notable characteristic of the Homelite UT50500 and UT50901 is their dual-line capability, allowing for more efficient cutting. This feature not only enhances cutting performance but also reduces the amount of time needed to complete trimming tasks. Furthermore, both models are designed for easy string replacement, making maintenance straightforward and quick.

Safety is also a priority, with both trimmers featuring a protective guard that shields users from debris while they work. The lightweight build, combined with the safety features, makes these trimmers suitable for homeowners and professionals alike.

In conclusion, the Homelite UT50500 and UT50901 offer an impressive combination of power, functionality, and ease of use. With their effective motor performance, adjustable features, and user-centric design, these electric string trimmers are excellent choices for anyone looking to maintain a neat and tidy outdoor space. Whether tackling stubborn weeds or simply maintaining the edges of your lawn, these trimmers make yard work an efficient and manageable task.
Top Page Image Contents