Marantz SR9300 manual Sorting Preset Stations, Name Input of the Preset Station, ← Down

SORTING PRESET STATIONS

ENGLISH

Stored preset stations number can be kept line.

To sort the numbers, press and hold the MEMO and the F/P buttons. “PRESET SORT” will appear on the display and sorting will be done.

NAME INPUT OF THE PRESET STATION.

This function allows the name of each preset channel to be entered using alphanumeric characters.

Before name inputting, need to store preset stations with the preset memory operation.

4.5.6. 4. 2.5.6.

5.6.

VOL OK CH

HS

Ex M

4.

4.

2.5. 4.

1.Recall the preset number to be inputted name with the method described in “Recalling” a preset station.

2.Press the MEMO button on the front panel or touch Memo on the remote for more than 3 seconds.

3.The left most column of the station name indicator flashes, indicating the character entry ready status.

4.When the SELECT knob is turned or press Up / Down button on the remote alphabetic and numeric characters will be displayed in

the following order:

A → B → C ...Z → 1 → 2 → 3..... 0 → – → + → / → (Blank) → A

UP →

←DOWN

To fill blank, press CLEAR button or tap CLR on the remote.

5. After selecting the first character to be entered, press the MEMO or ENTER buttons, press OK button on the remote.

The entry in this column is fixed and the next column starts to flash. Fill the next column same as.

To move back and forth between the characters, rotate GYRO TUNING dial or press Left / Right buttons on the remote.

Note:

Unused columns should be filled by entering blanks.

6. To save name, press the MEMO or ENTER button, press OK

button on the remote for more than 2 seconds.

48