Marantz SR9300 Multi Room System, Multi Room Playback Using Multi Room OUT Terminals, Second Room

Page 53

MULTI ROOM SYSTEM

The Multi Room system is a function which allows you to listen to the same or a different source in a room other than the room in which the SR9300 is located.

To use this function, a multi room remote unit and remote control signal receiver available from your Marantz dealer are necessary. The operations possible with the multi room function are explained briefly below.

For details, refer to the instruction manual supplied with the multi room remote control unit and receiver.

When the outputs of the MULTI ROOM OUT terminals are wired and connected to amplifiers installed in other rooms or MULTI SPEAKER OUT terminals are wired and connected to L&R speakers in other room, different sources can be played in rooms other than the main room in which this unit and the playback devices are installed.

SR9300 has some feature to MULTI ROOM SYSTEM as source selector, OSD information, sleep timer, Multi Room Speaker output and remote control.

MULTI ROOM PLAYBACK USING THE

MULTI ROOM OUT TERMINALS

The SR9300 is equipped with audio pre-out terminals for which the volume is adjustable and composite video output terminals as the MULTI ROOM output terminals.

A separately sold stereo power amplifier (PM8100) can be connected to enjoy multi room playback.

Operation to MULTI ROOM OUT without the remote controller.

1.

 

4.

 

 

 

 

3.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1. Press the MULTI button. The unit enters multi room mode and the display indicates “SELCT SOURCE” and flashes the “MULTI” indicator for approx. 10 seconds.

2. In this time, you can select the input source by pressing the input selector buttons.

Then, the display indicates “MULTI VOL” “VOLUME xx dB” for approx. 5 seconds.

3. During this time, you can set the volume level in the multi room as desired.

This will only set the volume in the second room.

4. If you desire to set sleep timer to multi room, press SLEEP button to setup the time.

MULTI ROOM PLAYBACK USING THE

MULTI SPEAKER TERMINALS

The SR9300 allows you to connect another set of speakers and place them in a different room or separated area for listening to music. Operation to MULTI ROOM SPEAKER without the remote controller.

1.

 

4.

 

 

 

 

 

2.

3.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1. Press the MSPK button. The unit enters multi room mode and the display indicates “SELCT SOURCE” and flashes the “MULTI” & “M-SPKR” indicators for approx. 10 seconds.

2.

In this time, you can select the input source by pressing the input

 

4.

selector buttons.

ENGLISH

If you desire to set sleep timer to multi room, press SLEEP button

3.

Then, the display indicates “MULTI VOL” “VOLUME xx dB” for

 

approx. 5 seconds.

During this time, you can set the volume level in the multi room as desired.

This will only set the volume in the multi room. to setup the time.

Notes for MULTI ROOM SPEAKER

•MULTI ROOM SPEAKER On/ Off is available in main room only.

•You can not play the source in 7.1ch playback mode as THX- Surr EX, DTS-ES in the main zone, when MULTI ROOM SPEAKER is active.In other words, the condition of main room is same as "Surr Back Speaker = None" setting.

•You can not turn MULTI SPEAKER on, when you set Speaker setup in OSD menu.

OPERATION TO MULTI ROOM OUTPUTS WITH THE REMOTE CONTROLLER FROM

SECOND ROOM.

1.

1. Tap the MULTI ROOM on on multi room remote control unit from the MULTI ROOM.

This operations will put the SR9300 into multi room mode and “MULTI” will light in the display.

MULTI ROOM Video output will show OSD information to condition of MULTI ROOM setup.

MU L T I ROOM

MU L T I ROOM

:

O F F

MU L T I S P KR

: O F F

V I D EO

:

D V D

A U D I O

:

D V D

V O L UME S E T U P

:

V AR I AB L E

V O L UME L E V E L

:

- 9 0 d B

S L E E P T I ME R

: O F F

- - - - MA I N - ROOM

 

S T A T U S - - - -

V I D EO : D V D

AUD I O : D V D

MA I N

 

E X I T

2. Press the VOL + or VOL – button on the multi room remote control unit to set the desired sound volume.

3. In multi room mode, the multi room remote control unit can be used in the multiroom to operate the following functions.

General:

Controlling volume level, sleep timer, and muting. Selecting input audio and video source

Tuner:

Selecting band, controlling preset channel up and down, tuning up and down, direct frequency call.

Notes for multi room system:

•The MULTI ROOM OUT and MULTI SPEAKER terminals are analog outputs.

These are not support to digital signals input.

If no sound is heard from the selected input source, check if the component is connected to the analog inputs.

•If Tuner (FM or AM) is active in main room, you can not control any function of tuner.

In this case, You can listen the same condition as main room.

49

Page 52 Page 54
Image 53
Page 52 Page 54
Contents Model SR9300 User Guide Risk of Electric Shock Read Before Operating Equipment Important Safety InstructionsPage Table of Contents Precautions FeaturesC. Boundary Gain Compensation DescriptionA. Advanced Speaker Array English Front Panel 4MUTE button @5PHONES jack for stereo headphones5INPUT Function Selector buttons AUDIO/ Video 6AUX1 input jacksCINEMA, Music FL DisplayMUSIC, PRO Logic ¡3THX Surr EX THX Surround EX mode indicator ¡2AUTO.SURR Auto Surround mode indicator¡4DTS-ES mode indicators DISC6.1 MTX6.1 ¡5PEAK indicatorSBR, C Rear Panel⁄1AC Inlet Component Video INPUT/OUTPUT⁄2AC Outlets ⁄3VIDEO IN/OUT TV, DVD, DSS, LD VCR1, VCR2Loading Batteries REMOTE-CONTROLLABLE Range Activating the RC3200AOperating Devices Main Tone AdjustOperating AMP & Tuner Input Select Tuner Surround ModeMulti Room Tuner page 3/3 Show the Status of SR9300 on LCD of RC3200ATuner page 2/3 First Setup Adjusting the SettingsAdjust the Backlight Timeout Change the Beep volumeTo Exit Setup Mode Second SetupThird Setup Remote controls to RC3200As learning eye. To do this, place Learning CommandsRecording Macros Learn SequenceEnglish Minimum System Requirements RC3200A EditImportant Notices Cleaning RC3200AHOW to Reset the RC3200A Height of the Speaker Units Speaker PlacementConnections Connecting a Subwoofer Connecting SpeakersConnecting Banana Plug Connecting Digital Audio Components Connecting the Audio ComponentsSacd Player CD Player Tape Deck MD PlayerConnect to the S-VIDEO Jacks and Component Connecting Video ComponentsConnect to the Video Jacks VIDEO, S-VIDEO , Component Jacks Connect to the Monitor and Video CameraVideo jack Component jackConnecting External Power Amplifier Advanced ConnectingConnecting Multi Channel Audio Source Connecting the Supplied Antennas Connecting the Antenna TerminalsConnecting AN FM Outdoor Antenna Connecting AN AM Outdoor AntennaConnecting for the Multi Room Connecting Remote Control JacksOn Screen Display Menu System SetupSpeaker Size Input Setup Assignable Digital InputSpeaker Setup Speaker Distance Time Alignment THX Audio SetupBass Peak Level Speakers LevelEffect Level PreferenceSurround CS II Circle Surround II Parameter Plii PRO Logic II Music ParameterCH Input Level DC Trigger SetupSelecting the Surround Mode Adjusting the Main VolumeAdjusting the Tonebass & Treble Control Basic Operation Play BackNight Mode Using the Sleep TimerTemporarily Turning OFF the Sound Dialogue Normalization MessageSurround Mode DSP Surround HALL, MATRIX, Movie PRO Logic II MOVIE, PRO Logic II MUSIC, PRO LogicStereo Circle Surround II CSII-CINEMA, CSII-MUSIC, CSII-MONODirect AutoDTS DTS ESStereo DolbyMovie HallOther Function Listening to Recording AN Analog SourceRecording a Digital Source AUX2 Input CH InputListening to the Tuner Preset MemoryBasic Operation Tuner Recalling a Preset Station Manual Preset MemoryChecking the Preset Stations Preset Scan← Down Sorting Preset StationsName Input of the Preset Station Multi Room Playback Using Multi Speaker Terminals Multi Room Playback Using Multi Room OUT TerminalsMulti Room System Second RoomAre the power amplifiers and speaker working properly ? TroubleshootingHOW to Reset the Unit Dimension Technical SpecificationsIs a registered trademark

SR9300 specifications

The Marantz SR9300 is a high-performance audio/video receiver that has garnered a reputation for delivering exceptional sound quality and enhanced functionality. This receiver is part of the esteemed Marantz lineup, a brand that has been synonymous with premium audio equipment for decades. The SR9300 integrates advanced technologies and robust features that make it a favorite among audiophiles and home theater enthusiasts alike.

One of the standout features of the SR9300 is its multi-channel amplification capability. With a power output of 110 watts per channel across seven channels, it ensures that every sound detail is reproduced with clarity and precision, filling even the largest rooms with rich, immersive audio. This model supports a wide range of surround sound formats, including Dolby Digital EX and DTS ES, providing an enveloping sound experience that brings movies and music to life.

The SR9300 also incorporates Marantz’s proprietary technology, such as the HDAM (Hyper Dynamic Amplifier Module), which enhances the receiver's signal processing capabilities. This results in superior sound quality that minimizes distortion and noise, allowing the listener to appreciate the finer details of their favorite tracks. The unit is also equipped with a high-quality digital processor that supports advanced audio formats and ensures a seamless transition between stereo and surround sound.

In terms of video capabilities, the SR9300 offers multiple HDMI inputs and outputs, allowing for easy integration with various devices, including Blu-ray players and gaming consoles. It supports 1080p video pass-through, ensuring the highest video quality when connected to HD displays. The receiver also features upscaling technology, which enhances lower-resolution video sources to near-HD quality, providing a rich visual experience.

User-friendliness is another hallmark of the Marantz SR9300. The intuitive on-screen setup makes installation straightforward, while the included remote control provides convenient access to all features and settings. Additionally, the unit is compatible with various home automation systems, making it a flexible option for smart home integration.

Overall, the Marantz SR9300 stands out with its combination of powerful performance, versatile connectivity options, and superior sound quality, making it an excellent choice for anyone looking to elevate their home audio-visual experience. Whether you’re enjoying a blockbuster film or listening to your favorite album, the SR9300 delivers an unparalleled auditory experience that is sure to impress.
Top Page Image Contents