Homelite UT10516/16 IN. 33CC, UT10514/14 IN. 33CC manual Table of contents, Introduction

Page 2

 

table of contents

Introduction

2

General Safety Rules

3-4

Specific Safety Rules

4

Symbols

5-6

Glossary of Terms

7

 Features

8-9

 Assembly

10

Operation

10-21

Maintenance

22-32

Bar and Chain Combinations

33

Troubleshooting

33-34

Warranty

35-37

Parts Ordering / Service

Back Page

 

introduction

This product has many features for making its use more pleasant and enjoyable. Safety, performance, and dependability have been given top priority in the design of this product making it easy to maintain and operate.

Page 

Image 2
Contents OPERATOR’S Manual Table of contents IntroductionGeneral safety rules Read ALL InstructionsKickback Specific safety rulesRefueling do not Smoke Symbols Symbol NameService Glossary of terms Front hand guard/Chain Brake Handle Cylinder Cover FeaturesProduct Specifications Primer bulb TriggerLOW Kickback SAW Chain Know Your Chain SAWChoke Lever SAFE-T-TIP ANTI-KICKBACK Nose GuardUnpacking AssemblyOperation Packing ListPremium Exact MIX Handling the Fuel SafelyMixing the Fuel See Figures 4 Operating the Chain BrakeSee Figure Run Position BrakeStarting the Engine See Figures 6To Start a Warm Engine Throttle Lock button Trigger Ignition switchStopping the Engine See Figures 12Adjusting Idle Speed Pull and PushSee Figures 16 Kickback PrecautionsProper Grip on Handles Proper Cutting Stance Work Area PrecautionsBasic OPERATING/CUTTING Procedures Thumb on Underside­of Handle bar Straight Chain line ArmSee Figures 21 Proper Procedure for Tree FellingHazardous Conditions Vertical Cut Loose SectioN Horizontal Kickback Removing Buttress RootsBucking Overbucking Bucking with a WedgeBucking Logs Under Stress Cutting Springpoles UnderbuckingLimbing and Pruning See Figures 31Lubrication MaintenanceGeneral Maintenance See Figures 34Chain tensioning Pin hole ADJUSTINGCutters chain rotation Chain drive links Chain tensioning Screw Bar Groove Chain drive linksAdjusting the Chain Tension See Figures 44≈ .050 Chain MaintenanceSee Figures 47 Raker depth gauge clearance 025 Inspect drive SprocketSharpening the Cutters See Figures 49Maintaining Depth Gauge Clearance TOP Plate Filing AngleSide Plate Angle SeeMaintaining the SAFE-T-TIP Nose Guard Maintaining the Guide BARMounting the SAFE-T-TIP Nose Guard See Figures 59See Figures 61 Cleaning the AIR FilterChoose one of the following cleaning options Before adjusting the carburetor Adjusting the CarburetorCleaning the Starter Unit See Figures 64Checking the Fuel Filter Cleaning the EngineClean Cylinder­ Fins Clean flywheel Fuel filter Replacing the Spark PlugStoring the Product See Figures 72Troubleshooting Bar and chain combinationsCall US First Warranty Limited Warranty StatementYour Warranty Rights and Obligations Warranty California Proposition Serial Number