Homelite UT34010 manual Maintenance, Assembling BAR and Chain, Sprocket, Cover

Page 23

MAINTENANCE

ASSEMBLING BAR AND CHAIN

See Figures 25, 26, 27, 28 and 29.

CAUTION:

Remove the battery pack from the chain saw and make sure the chain has stopped before you do any work on the saw.

WARNING:

The safety instructions in this section are to protect the user from serious personal injury.

CAUTION:

Always wear gloves when handling the bar and chain; these components are sharp and may contain burrs.

SPROCKET

ADJUSTING

PIN

 

 

BAR

WASHER

 

CHAIN

 

CHAIN TENSION

 

CHAIN

PIN HOLE

 

CHAIN

COVER

 

 

COVER

SCREW

 

 

Fig. 25

WARNING:

Never touch or adjust the chain while the motor is running. The saw chain is very sharp, always wear protective gloves when performing maintenance to the chain.

1.Remove the battery pack before you do any work on the chain saw.

2.Remove the hex key from the storage area and use it to remove the chain cover screw, washer and chain cover from the chain saw.

3.Remove the bar and chain from the mounting surface.

4.Remove the old chain from the bar.

5.Lay out the new saw chain in a loop and straighten any kinks. The cutters should face in the direction of chain rotation. If they face the opposite direction, turn the loop over.

6.Place the chain drive links into the bar groove. Position the chain so there is a loop at the back of the bar. Hold the chain in position on the bar and place the loop around the sprocket of the chain saw. Fit the bar flush against the mounting surface so that the bar stud is in the long slot of the bar.

NOTE: When placing the bar on the bar stud, assure that the adjusting pin is in the chain tension pin hole.

23

CHAIN DRIVE

LINKS

BAR

GROOVE

Fig. 26

Image 23
Contents Operators Manual Introduction Table of ContentsSafety Apparel Important Safety InstructionsRead ALL Instructions Basic Safety Precautions See Figures 1 KickbackPull Push CUTTING/WORK AreaBattery Safety Understanding Your Chain SAW Safety DevicesCharger Safety Symbol Name Explanation SymbolsSymbol Meaning Applications SpecificationsFeatures UnpackingHEX KEY Rear Handle BAR SAFE-T-TIP Chain Battery Pack Hand GuardScabbard Trigger Lock ButtonFront Handle Guard Glossary of TermsOperation Battery Pack and ChargerLatches To Install Battery PackTo Remove Battery Pack Chain OIL SystemStopping the Chain SAW Starting and Stopping the Chain SAWPreparation for Cutting Starting the Chain SAWProper Grip Improper Chain Line Tree Felling Basic Cutting ProcedureWork Area Precautions Proper Cutting StanceNotch Approx /3 Diameter Trunk Back CUT Planned Line of Fall Safe Retreat ZoneRetreat Zone See Figures 18 through BuckingSee Figures 15 Notch Back CUT Hinge WedgeLoad Finishing CUT 1ST CUT Bucking Logs Under StressLOG Supported AT ONE END LOG Supported AT Both EndsUnderbucking Types of Cutting UsedLimbing OverbuckingLoad Second CUT First CUT 1/3 Diameter Finishing CUT PruningSpringpole Springpoles Cover MaintenanceAssembling BAR and Chain SprocketChain Tensioning Screw See Figures 30 Chain TensionHOW to Sharpen the Cutters Chain MaintenanceDepth Gauge Clearance TOP Plate Filing AngleLeft Hand Cutters Side Plate AngleSee Figures 41, 42, Guide BAR MaintenanceReversing the Guide BAR Mounting Screw Locking Rivet SAFE-T-TIP Tighten 3/4 A Turn SAFE-T-TIP Nose Guard MAINTE- NanceMounting SAFE-T-TIP Nose Guard See Figures 42Batteries Disposal of the Exhausted BatteryBattery Pack Preparation for Recycling Transporting and StoringRecommended BAR and Chain Combinations TroubleshootingBAR and Chain Combinations Limited Warranty Statement WarrantyPage Model Number UT34010 Serial Number Service Model NO. and Serial noHOW to Order Repair Parts

UT34010 specifications

The Homelite UT34010 is a versatile and efficient string trimmer designed for homeowners and landscapers alike. Renowned for its lightweight construction and user-friendly features, this trimmer simplifies yard maintenance tasks, making it an ideal choice for those looking to maintain pristine lawns and gardens.

One of the standout features of the Homelite UT34010 is its powerful 34cc two-stroke gas engine. This engine is designed to deliver robust performance, ensuring that users can tackle even the toughest jobs with ease. The power generated by the engine allows for efficient cutting, helping to streamline the trimming process and reduce the time spent on yard work.

Another key characteristic of the UT34010 is its 18-inch cutting swath. This ample cutting width enables users to cover large areas quickly, making it an effective tool for trimming around fences, trees, and flower beds. The trimmer is equipped with a bump-feed head, which allows for easy line advancement; simply tap the head on the ground, and new line is fed out, ensuring uninterrupted work without tedious manual adjustments.

The design of the Homelite UT34010 also emphasizes comfort and ease of use. It includes a padded handle, reducing strain on the user's hands during prolonged use. Additionally, the unit features an adjustable shoulder strap that aids in weight distribution, making it less taxing on the back and arms. This ergonomic design allows for extended periods of operation without discomfort.

In terms of technology, the UT34010 incorporates a fuel-efficient engine that adheres to modern emission standards, making it a more environmentally friendly choice compared to older models. This focus on efficiency ensures that users can complete their trimming tasks while minimizing their carbon footprint.

The durability of the UT34010 is another important aspect, as it is built with robust materials that can withstand the rigors of regular use. The trimmer's construction ensures longevity, so it can be a reliable tool in any homeowner's landscaping arsenal.

Overall, the Homelite UT34010 string trimmer combines power, efficiency, and comfort in a package designed for ease of use. Whether for occasional yard touch-ups or regular maintenance, this trimmer stands out as a solid investment for anyone seeking a dependable and effective landscaping tool.