Homelite UT34010 manual TOP Plate Filing Angle, Left Hand Cutters, Side Plate Angle

Page 27

MAINTENANCE

5.Put a few firm strokes on every tooth. File all left hand cutters in one direction. Then move to the other side and file the right hand cutters in the opposite direction. Occasionally remove filings from the file with a wire brush.

WARNING:

Improper chain sharpening increases the potential of kickback.

WARNING:

Failure to replace or repair damaged chain can cause serious injury.

WARNING:

The saw chain is very sharp, always wear protective gloves when performing maintenance to the chain.

TOP PLATE FILING ANGLE

See Figure 36.

LEFT HAND

CUTTERS

RIGHT HAND

 

 

CUTTERS

 

Fig. 35

CORRECT TOP PLATE

INCORRECT TOP PLATE

FILING ANGLE

FILING ANGLE

 

LESS

MORE

30°

THAN 30°

THAN 30°

 

 

Fig. 36

■CORRECT 30° - File holders are marked with guide marks to align file properly to produce correct top plate angle.

■LESS THAN 30° - For Cross Cutting.

■MORE THAN 30° - Feathered Edge Dulls Quickly.

SIDE PLATE ANGLE

See Figure 37.

■CORRECT- 80o Produced automatically if correct diameter file is used in file holder.

■HOOK- “Grabs” and dulls quickly. Increases potential of KICKBACK.

Results from using a file with diameter too small, or file held too low.

■BACKWARD SLOPE- Needs too much feed pressure, causes excessive wear to bar and chain.

Results from using a file with diameter too large, or file held too high.

DEPTH GAUGE CLEARANCE

See Figure 38.

CORRECT SIDE

PLATE FILING

ANGLE

80°

INCORRECT SIDE PLATE

FILING ANGLE

HOOK BACKWARD SLOPE

Fig. 37

RAKER CLEARANCE

.025 in. (0.6 mm)

1.The depth gauge should be maintained at a clear- ance of .025 in. (0.6 mm). Use a depth gauge tool for checking the depth gauge clearances.

2.Every time the chain is filed, check the depth gauge clearance.

27

Fig. 38

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Operators Manual Introduction Table of ContentsImportant Safety Instructions Read ALL Instructions Basic Safety PrecautionsSafety Apparel See Figures 1 KickbackPull Push CUTTING/WORK AreaBattery Safety Understanding Your Chain SAW Safety DevicesCharger Safety Symbol Name Explanation SymbolsSymbol Meaning Applications SpecificationsFeatures UnpackingHEX KEY Rear Handle BAR SAFE-T-TIP Chain Battery Pack Hand GuardScabbard Trigger Lock ButtonFront Handle Guard Glossary of TermsOperation Battery Pack and ChargerLatches To Install Battery PackTo Remove Battery Pack Chain OIL SystemStopping the Chain SAW Starting and Stopping the Chain SAWPreparation for Cutting Starting the Chain SAWProper Grip Improper Chain Line Tree Felling Basic Cutting ProcedureWork Area Precautions Proper Cutting StancePlanned Line of Fall Safe Retreat Zone Retreat ZoneNotch Approx /3 Diameter Trunk Back CUT See Figures 18 through BuckingSee Figures 15 Notch Back CUT Hinge WedgeLoad Finishing CUT 1ST CUT Bucking Logs Under StressLOG Supported AT ONE END LOG Supported AT Both EndsUnderbucking Types of Cutting UsedLimbing OverbuckingPruning Springpole SpringpolesLoad Second CUT First CUT 1/3 Diameter Finishing CUT Cover MaintenanceAssembling BAR and Chain SprocketChain Tensioning Screw See Figures 30 Chain TensionHOW to Sharpen the Cutters Chain MaintenanceDepth Gauge Clearance TOP Plate Filing AngleLeft Hand Cutters Side Plate AngleGuide BAR Maintenance Reversing the Guide BARSee Figures 41, 42, Mounting Screw Locking Rivet SAFE-T-TIP Tighten 3/4 A Turn SAFE-T-TIP Nose Guard MAINTE- NanceMounting SAFE-T-TIP Nose Guard See Figures 42Batteries Disposal of the Exhausted BatteryBattery Pack Preparation for Recycling Transporting and StoringTroubleshooting BAR and Chain CombinationsRecommended BAR and Chain Combinations Limited Warranty Statement WarrantyPage Service Model NO. and Serial no HOW to Order Repair PartsModel Number UT34010 Serial Number

UT34010 specifications

The Homelite UT34010 is a versatile and efficient string trimmer designed for homeowners and landscapers alike. Renowned for its lightweight construction and user-friendly features, this trimmer simplifies yard maintenance tasks, making it an ideal choice for those looking to maintain pristine lawns and gardens.

One of the standout features of the Homelite UT34010 is its powerful 34cc two-stroke gas engine. This engine is designed to deliver robust performance, ensuring that users can tackle even the toughest jobs with ease. The power generated by the engine allows for efficient cutting, helping to streamline the trimming process and reduce the time spent on yard work.

Another key characteristic of the UT34010 is its 18-inch cutting swath. This ample cutting width enables users to cover large areas quickly, making it an effective tool for trimming around fences, trees, and flower beds. The trimmer is equipped with a bump-feed head, which allows for easy line advancement; simply tap the head on the ground, and new line is fed out, ensuring uninterrupted work without tedious manual adjustments.

The design of the Homelite UT34010 also emphasizes comfort and ease of use. It includes a padded handle, reducing strain on the user's hands during prolonged use. Additionally, the unit features an adjustable shoulder strap that aids in weight distribution, making it less taxing on the back and arms. This ergonomic design allows for extended periods of operation without discomfort.

In terms of technology, the UT34010 incorporates a fuel-efficient engine that adheres to modern emission standards, making it a more environmentally friendly choice compared to older models. This focus on efficiency ensures that users can complete their trimming tasks while minimizing their carbon footprint.

The durability of the UT34010 is another important aspect, as it is built with robust materials that can withstand the rigors of regular use. The trimmer's construction ensures longevity, so it can be a reliable tool in any homeowner's landscaping arsenal.

Overall, the Homelite UT34010 string trimmer combines power, efficiency, and comfort in a package designed for ease of use. Whether for occasional yard touch-ups or regular maintenance, this trimmer stands out as a solid investment for anyone seeking a dependable and effective landscaping tool.
Top Page Image Contents