Homelite UT34010 manual Understanding Your Chain SAW Safety Devices, Battery Safety

Page 6

IMPORTANT SAFETY INSTRUCTIONS

UNDERSTANDING YOUR CHAIN SAW SAFETY DEVICES

See Figure 4.

SAFE-T-TIP® Anti-Kickback Nose Guard

The SAFE-T-TIP® prevents kickback from happening, because it covers the tip of the bar where kickback is generated. Never attempt any kind of cutting where the SAFE-T-TIP® would have to be removed from the bar tip.

SAFE-T-TIP

Fig. 4

LOW KICKBACK SAW CHAIN

The rakers (depth gauges) ahead of each cutter can minimize the force of a kickback reaction by preventing the cutters from digging in too deeply at the kickback zone. Only use replacement chain that is equivalent to original chain or has been certified as low kickback chain per ANSI B175.1.

Low kickback saw chain is chain that has met the kickback performance requirements of ANSI B175.1 - 1991 (American National Standard for Power Tools - Gasoline-Powered Chain Saws-Safety Requirements) when tested on the representative sample of chain saws below 3.8 c.i.d. specified in ANSI B175.1 - 1991.

As saw chains are sharpened during their useful life, they lose some of the low kickback qualities and extra caution should be used.

GUIDE BARS

Generally, guide bars with small radius tips have somewhat lower kickback potentials.

When making a replacement, be sure to order one of the Homelite bars listed for your saw in this operator's manual. The proper size SAFE-T-TIP® nose guard comes installed on the bar. Use only guide bars that have a provision for mounting the SAFE-T-TIP®.

BATTERY SAFETY

Battery operated units do not have to be plugged into an electrical outlet; therefore, they are always in operating condition. Be aware of possible haz- ards even when unit is not operating.

Remove the battery pack from the chain saw before cleaning, servicing, storing, removing material from the unit, changing accessories such as the bar and chain, or when not in use.

A battery pack must be recharged only with the specified charger for the battery pack. A charger that may be suitable for one type of battery pack may create a risk of fire when used with another battery pack. Use battery pack only with charger listed.

BATTERY PACK:

Item # 1323701

CHARGER:

Item # 1425701

To reduce the risk of explosion and possible injury, Do not place battery units or their batteries near fire or heat.

Do not open or mutilate the battery pack. Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed.

A damaged battery pack is subject to explosion. To avoid serious personal injury, properly dispose of a damaged battery pack.

Batteries vent hydrogen gas and can explode in the presence of a source of ignition, such as a pilot light. To reduce the risk of serious personal injury, never use any cordless product in the presence of open flame. An exploded battery pack can propel debris and chemicals. If exposed, flush with water immediately.

Do not charge unit in a damp or wet location. Following this rule will reduce the risk of electric shock.

For best results, your battery unit should be charged in a location where the temperature is more than 50°F (10°C) but less than 100°F (38°C). Do not store outside or in vehicles.

Under extreme usage or temperature conditions, battery pack leakage may occur. If liquid comes in contact with your skin, wash immediately with soap and water, then neutralize with lemon juice or vinegar. If liquid gets into your eyes, flush them with clean water for at least 10 minutes, then seek immediate medical attention.

6

Image 6
Contents Operators Manual Table of Contents IntroductionImportant Safety Instructions Read ALL Instructions Basic Safety PrecautionsSafety Apparel Kickback See Figures 1CUTTING/WORK Area Pull PushUnderstanding Your Chain SAW Safety Devices Battery SafetyCharger Safety Symbols Symbol Name ExplanationSymbol Meaning Unpacking SpecificationsFeatures ApplicationsTrigger Lock Button Rear Handle BAR SAFE-T-TIP Chain Battery Pack Hand GuardScabbard HEX KEYGlossary of Terms Front Handle GuardBattery Pack and Charger OperationChain OIL System To Install Battery PackTo Remove Battery Pack LatchesStarting the Chain SAW Starting and Stopping the Chain SAWPreparation for Cutting Stopping the Chain SAWProper Grip Improper Chain Line Proper Cutting Stance Basic Cutting ProcedureWork Area Precautions Tree FellingPlanned Line of Fall Safe Retreat Zone Retreat ZoneNotch Approx /3 Diameter Trunk Back CUT Notch Back CUT Hinge Wedge BuckingSee Figures 15 See Figures 18 throughLOG Supported AT Both Ends Bucking Logs Under StressLOG Supported AT ONE END Load Finishing CUT 1ST CUTOverbucking Types of Cutting UsedLimbing UnderbuckingPruning Springpole SpringpolesLoad Second CUT First CUT 1/3 Diameter Finishing CUT Sprocket MaintenanceAssembling BAR and Chain CoverChain Tensioning Screw Chain Tension See Figures 30Chain Maintenance HOW to Sharpen the CuttersSide Plate Angle TOP Plate Filing AngleLeft Hand Cutters Depth Gauge ClearanceGuide BAR Maintenance Reversing the Guide BARSee Figures 41, 42, See Figures 42 SAFE-T-TIP Nose Guard MAINTE- NanceMounting SAFE-T-TIP Nose Guard Mounting Screw Locking Rivet SAFE-T-TIP Tighten 3/4 A TurnTransporting and Storing Disposal of the Exhausted BatteryBattery Pack Preparation for Recycling BatteriesTroubleshooting BAR and Chain CombinationsRecommended BAR and Chain Combinations Warranty Limited Warranty StatementPage Service Model NO. and Serial no HOW to Order Repair PartsModel Number UT34010 Serial Number

UT34010 specifications

The Homelite UT34010 is a versatile and efficient string trimmer designed for homeowners and landscapers alike. Renowned for its lightweight construction and user-friendly features, this trimmer simplifies yard maintenance tasks, making it an ideal choice for those looking to maintain pristine lawns and gardens.

One of the standout features of the Homelite UT34010 is its powerful 34cc two-stroke gas engine. This engine is designed to deliver robust performance, ensuring that users can tackle even the toughest jobs with ease. The power generated by the engine allows for efficient cutting, helping to streamline the trimming process and reduce the time spent on yard work.

Another key characteristic of the UT34010 is its 18-inch cutting swath. This ample cutting width enables users to cover large areas quickly, making it an effective tool for trimming around fences, trees, and flower beds. The trimmer is equipped with a bump-feed head, which allows for easy line advancement; simply tap the head on the ground, and new line is fed out, ensuring uninterrupted work without tedious manual adjustments.

The design of the Homelite UT34010 also emphasizes comfort and ease of use. It includes a padded handle, reducing strain on the user's hands during prolonged use. Additionally, the unit features an adjustable shoulder strap that aids in weight distribution, making it less taxing on the back and arms. This ergonomic design allows for extended periods of operation without discomfort.

In terms of technology, the UT34010 incorporates a fuel-efficient engine that adheres to modern emission standards, making it a more environmentally friendly choice compared to older models. This focus on efficiency ensures that users can complete their trimming tasks while minimizing their carbon footprint.

The durability of the UT34010 is another important aspect, as it is built with robust materials that can withstand the rigors of regular use. The trimmer's construction ensures longevity, so it can be a reliable tool in any homeowner's landscaping arsenal.

Overall, the Homelite UT34010 string trimmer combines power, efficiency, and comfort in a package designed for ease of use. Whether for occasional yard touch-ups or regular maintenance, this trimmer stands out as a solid investment for anyone seeking a dependable and effective landscaping tool.