Honda Power Equipment MM52 manual Adjusting Cutting Height

Page 34

ADJUSTING CUTTING HEIGHT

1.Park the tractor on a level surface and set the parking brake.

2.Make sure the Main Transmission Lever is in “NEUTRAL”and the PTO levers are “OFF” and the lift lever is in the center (NEUTRAL) position.

3.Start the engine, move the hydraulic cylinder selector lever (if installed) to “FRONT” and raise the mower deck fully with the Lift Selector lever.

4.Turn the Lowering Speed Adjust knob fully clockwise to lock the hydraulic system.

5.Set the Lift Selector lever to “DOWN” to be sure the mower deck is locked in the fully raised position. Deck should not descend. Return the lift lever to “NEUTRAL”and then stop the engine and remove the ignition key.

t A-

mBe sure all moving parts have

stopped before adjusting cutting height. Contacting moving parts can cause injury.

6. Remove the locking ,pin from the gauge wheel and set the wheel for the desired cutting height.

7. Repeat the adjustment procedure for the other gauge wheel.

NOTE: Both gauge wheels must be set to the same height.

8.If necessary, remove the nut and bolt from left, right and center anti-scalping rollers, and set the anti-scalp rollers for the desired cutting height. This height is determined by which hole is used in anti-scalping wheel brackets. As illustrated, top hole sets height of 1.5 in, middle hole 2 in and bottom hole 2 l/2 in. Make sure to set all anti-scalping rollers to same height.

9.Insert the bolt into the anti-scalp roller bracket and secure it with the nut.

30

Page 33 Page 35
Image 34
Page 33 Page 35
Contents Page Page Introduction Safety-Alert Symbol means ATTENTION! Become AlertYour Safety is Involved To the OwnerPage General Information Some Illustrations In this manualPage Contents Safety Rules Your Safety is Involved Safety InformationTraining Operational Safety PreparationMaintenance Safety StorageSafety Decals Replace immediately if damagedSET-UP and Assembly Dealer SET-UP InstructionsParts in Lift Linkage Box Parts in Hardware Bag Pre-Delivery Check List Dealer Responsibility Delivery Check List Dealer ResponsibilityInstalling Front Tensioner Bracket Lift Link Shaft Installing Mower Installing Lift LinkInstalling Rear Deck Links InstaDiing Discharge CoverInstalling Mower Installing Mower Deck Positioning Mower Under TractorAttaching Rear Mower Deck Links Attaching Front Deck Links To MowerAttaching Lift Plates Attaching Front Link ProtectorLeveling Mower Deck Front to Back Leveling Installing Deck Belt Adjusting Lifting Height With Lift Plate Mower Deck Lift Rod Lift Link Rod Removb lock pins Remove linchpins and link shaft Cleaning Mower Deck Exterior Deck Drive BeltPRE-OPERATION Checks Checking Blade ConditionNormal Excessively Worn Cracked Adjusting Cutting Height Lowering Speed Adjustment OperationAn Emergency StartingStopping Normal UseCutting Patterns Operation Service Period Maintenance ScheduleLubrication INFOFiMATlON Maintenance Weekly CheckBlade Installation Blade ServicingSharpening Blades Blade InspectionTorque bolt to 23.4 kg-m 170 ft-lbs Blade Spindle Removal Spindle RepairSpindle Repair Tips Blade Spindle Disassembly Proper adjustment is attained Blade Spindle Assembly1Improper positioning of seals can cause seal failure Blade Spindle Installation Drive Belt Replacement Replacing the BeltsBlade Belt Replacement Cleaning Mower Deck Storage StorageTroubleshooting ProblemsolutionProblem Specifications Warranty Service Owner Satisfaction

MM52 specifications

The Honda Power Equipment MM52 is a versatile and powerful mini-tiller designed to meet the needs of both homeowners and professional landscapers. Renowned for its reliability and efficiency, the MM52 has quickly become a popular choice for gardening enthusiasts and agricultural applications alike.

One of the standout features of the Honda MM52 is its robust and efficient 4-stroke engine. This engine not only provides exceptional power but also maintains excellent fuel efficiency, making it a cost-effective choice for prolonged use. The Easy Start technology further enhances user experience, allowing the engine to start with minimal effort, eliminating the frustration associated with traditional pull-start engines.

The MM52 is equipped with a series of adjustable tines that can rotate at different depths, accommodating various soil types and gardening needs. This feature provides the flexibility to cultivate, aerate, and mix soil easily, whether you’re preparing a new garden bed or maintaining an established landscape. The tilling width is also adjustable, allowing for efficient operation in tight spaces or larger open areas.

Comfort is a key consideration in the design of the Honda MM52. It features ergonomic handlebars that can be adjusted for height, providing a more comfortable grip and better control during operation. Additionally, the tiller’s lightweight construction ensures easy maneuverability, reducing fatigue over extended use.

The Honda MM52 is built to withstand the rigors of regular use. Its durable construction includes a robust frame and quality components that ensure longevity and reliability. With Honda’s reputation for engineering excellence, users can expect not just performance but also the durability that comes with a well-built machine.

Safety features have not been overlooked in the design of the MM52. The tiller includes protective guards and a safety lockout system that prevents accidental starts, ensuring user safety during operation.

In conclusion, the Honda Power Equipment MM52 is a powerful mini-tiller that combines efficiency, power, and user-friendly features. With its innovative technologies, adjustable tilling capabilities, and ergonomic design, it stands out as an excellent tool for anyone looking to enhance their gardening or landscaping projects. Investing in the MM52 means investing in a reliable partner for all your tilling needs.
Top Page Image Contents