Honda Power Equipment MM52 manual Blade Spindle Removal, Spindle Repair Tips

Page 43

SPINDLE REPAIR

Blade Spindle Removal

1.Remove blade from spindle.

2.Remove belt shield.

3.Remove belt from pulleys.

4.Remove bolt and flat washer from top of spindle shaft.

5.Disassemble split taper bushing (located on top of pulley) by removing the two bolts and insert- ing them into the threaded holes in bushing flange. Tighten bolts alternately to remove split taper bushing. Remove pulley.

6.Remove three bolts attaching spindle to mower frame and remove spindle.

Spindle Repair Tips

1.As a reference point, the top of spindle housing is the short portion.

2.To minimize wear, bearing cups, cones and sleeves are press fit to shaft and will require a press or similar device for removal.

3.When disassembling, support housing casting to prevent damage.

4.Remove bearing cups by placing a punch in housing slots and drive cup out. Alternate punch positions from side to side. Use care to prevent housing damage.

5.Bore-tite” sealant is used on the outer diameter of the seals, Substitute seals may not meet original equipment specifications and could

cause leakage.

Bore-MeIs a registeredtrademarkof ChicagoRawhideIndustries.

MAINTENANCE

I

c1

1.Spindle assembly

2.Seal

3.Sleeve

4.Bearing cone

5.Housing and cups

6.Cup

7.Shaft

Spindle Assembly

39

Image 43
Contents Page Page To the Owner Safety-Alert Symbol means ATTENTION! Become AlertYour Safety is Involved IntroductionPage Some Illustrations In this manual General InformationPage Contents Safety Rules Your Safety is Involved Safety InformationTraining Preparation Operational SafetyStorage Maintenance SafetyReplace immediately if damaged Safety DecalsDealer SET-UP Instructions SET-UP and AssemblyParts in Lift Linkage Box Parts in Hardware Bag Delivery Check List Dealer Responsibility Pre-Delivery Check List Dealer ResponsibilityInstalling Front Tensioner Bracket Lift Link Shaft Installing Lift Link Installing MowerInstaDiing Discharge Cover Installing Rear Deck LinksInstalling Mower Positioning Mower Under Tractor Installing Mower DeckAttaching Front Deck Links To Mower Attaching Rear Mower Deck LinksAttaching Front Link Protector Attaching Lift PlatesLeveling Mower Deck Front to Back Leveling Installing Deck Belt Adjusting Lifting Height With Lift Plate Mower Deck Lift Rod Lift Link Rod Removb lock pins Remove linchpins and link shaft Deck Drive Belt Cleaning Mower Deck ExteriorChecking Blade Condition PRE-OPERATION ChecksNormal Excessively Worn Cracked Adjusting Cutting Height Operation Lowering Speed AdjustmentNormal Use StartingStopping An EmergencyCutting Patterns Operation Service Period Maintenance ScheduleLubrication INFOFiMATlON Weekly Check MaintenanceBlade Servicing Blade InstallationBlade Inspection Sharpening BladesTorque bolt to 23.4 kg-m 170 ft-lbs Blade Spindle Removal Spindle RepairSpindle Repair Tips Blade Spindle Disassembly Proper adjustment is attained Blade Spindle Assembly1Improper positioning of seals can cause seal failure Blade Spindle Installation Replacing the Belts Drive Belt ReplacementBlade Belt Replacement Cleaning Mower Deck Storage StorageProblemsolution TroubleshootingProblem Specifications Owner Satisfaction Warranty Service

MM52 specifications

The Honda Power Equipment MM52 is a versatile and powerful mini-tiller designed to meet the needs of both homeowners and professional landscapers. Renowned for its reliability and efficiency, the MM52 has quickly become a popular choice for gardening enthusiasts and agricultural applications alike.

One of the standout features of the Honda MM52 is its robust and efficient 4-stroke engine. This engine not only provides exceptional power but also maintains excellent fuel efficiency, making it a cost-effective choice for prolonged use. The Easy Start technology further enhances user experience, allowing the engine to start with minimal effort, eliminating the frustration associated with traditional pull-start engines.

The MM52 is equipped with a series of adjustable tines that can rotate at different depths, accommodating various soil types and gardening needs. This feature provides the flexibility to cultivate, aerate, and mix soil easily, whether you’re preparing a new garden bed or maintaining an established landscape. The tilling width is also adjustable, allowing for efficient operation in tight spaces or larger open areas.

Comfort is a key consideration in the design of the Honda MM52. It features ergonomic handlebars that can be adjusted for height, providing a more comfortable grip and better control during operation. Additionally, the tiller’s lightweight construction ensures easy maneuverability, reducing fatigue over extended use.

The Honda MM52 is built to withstand the rigors of regular use. Its durable construction includes a robust frame and quality components that ensure longevity and reliability. With Honda’s reputation for engineering excellence, users can expect not just performance but also the durability that comes with a well-built machine.

Safety features have not been overlooked in the design of the MM52. The tiller includes protective guards and a safety lockout system that prevents accidental starts, ensuring user safety during operation.

In conclusion, the Honda Power Equipment MM52 is a powerful mini-tiller that combines efficiency, power, and user-friendly features. With its innovative technologies, adjustable tilling capabilities, and ergonomic design, it stands out as an excellent tool for anyone looking to enhance their gardening or landscaping projects. Investing in the MM52 means investing in a reliable partner for all your tilling needs.