Honda Power Equipment MM52 manual Preparation, Operational Safety

Page 9

Preparation

•Always wear relatively tight and belted clothing to avoid entanglement in moving parts. Wear sturdy, rough-soled work shoes and protective equipment for eyes, hands, hearing and head.

•Ensure that mower is properly mounted, ad- justed and in good operating condition.

•Remove accumulated debris from mower to avoid fire hazard.

•Ensure all safety decals are installed and in good condition. (See Safety Decals section for location drawing.)

•Ensure shields and guards are properly in- stalled and in good condition.

•Inspect area to be cut and remove stones, branches or other hard objects that might be thrown, causing injury or damage.

Operational Safety

•You may not be able to stop the tractor safely if the clutch or brake pedal mechanisms are improperly adjusted, allowing them to contact mower components.

•When the mower lift stops are installed as instructed in this manual, properly adjusted clutch and brake pedal mechanisms will not contact mower components. You should frequently check that the tractor clutch and brake pedal mechanisms are in adjustment.

•If the clutch or brake pedal mechanisms can contact mower components, do not operate until properly adjusted.

Do not operate mower unless discharge chute is installed.

Keep bystanders away from equipment while it is in operation.

SAFETY INFORMATION

Never direct discharge toward anyone. Operate only in daylight or good artificial light. Keep hands and feet away from mower while tractor engine is running.

•Stay clear of all moving parts.

•If your tractor is equipped with a ROPS, you must wear your seat belt.

•No riders are allowed on tractor or mower.

•Start engine from operator’s seat after disen- gaging tractor PTO and placing transmission in neutral.

•Always sit in tractor seat when starting the engine or operating controls.

•Disengage power-takeoff, shift tractor into neutral, and place all controls in neutral before starting tractor engine.

Make sure area behind you is clear before operating in reverse.

Do not operate on steep slopes,

Do not stop, start or change directions sud- denly on slopes.

Use extreme care and reduce ground speed on slopes and rough terrain,

•Watch for hidden hazards on the terrain during operation.

•Stop mower and tractor immediately upon striking an obstruction. Turn off engine, remove key, inspect and repair any damage before resuming operation.

•Before working underneath, raise mower, and block securely. Hydraulic system leak down and failure of mechanical or hydraulic system can cause equipment to drop.

•Disengage power to mower, lower mower to ground, stop engine, set parking brake and remove key before dismounting tractor.

5

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Page Page Your Safety is Involved Safety-Alert Symbol means ATTENTION! Become AlertIntroduction To the OwnerPage Some Illustrations In this manual General InformationPage Contents Safety Information Safety Rules Your Safety is InvolvedTraining Preparation Operational SafetyStorage Maintenance SafetyReplace immediately if damaged Safety DecalsDealer SET-UP Instructions SET-UP and AssemblyParts in Lift Linkage Box Parts in Hardware Bag Delivery Check List Dealer Responsibility Pre-Delivery Check List Dealer ResponsibilityInstalling Front Tensioner Bracket Lift Link Shaft Installing Lift Link Installing MowerInstaDiing Discharge Cover Installing Rear Deck LinksInstalling Mower Positioning Mower Under Tractor Installing Mower DeckAttaching Front Deck Links To Mower Attaching Rear Mower Deck LinksAttaching Front Link Protector Attaching Lift PlatesLeveling Mower Deck Front to Back Leveling Installing Deck Belt Adjusting Lifting Height With Lift Plate Mower Deck Lift Rod Lift Link Rod Removb lock pins Remove linchpins and link shaft Deck Drive Belt Cleaning Mower Deck ExteriorChecking Blade Condition PRE-OPERATION ChecksNormal Excessively Worn Cracked Adjusting Cutting Height Operation Lowering Speed AdjustmentStopping StartingAn Emergency Normal UseCutting Patterns Maintenance Schedule Operation Service PeriodLubrication INFOFiMATlON Weekly Check MaintenanceBlade Servicing Blade InstallationBlade Inspection Sharpening BladesTorque bolt to 23.4 kg-m 170 ft-lbs Spindle Repair Blade Spindle RemovalSpindle Repair Tips Blade Spindle Disassembly Blade Spindle Assembly Proper adjustment is attained1Improper positioning of seals can cause seal failure Blade Spindle Installation Replacing the Belts Drive Belt ReplacementBlade Belt Replacement Cleaning Mower Deck Storage StorageProblemsolution TroubleshootingProblem Specifications Owner Satisfaction Warranty Service

MM52 specifications

The Honda Power Equipment MM52 is a versatile and powerful mini-tiller designed to meet the needs of both homeowners and professional landscapers. Renowned for its reliability and efficiency, the MM52 has quickly become a popular choice for gardening enthusiasts and agricultural applications alike.

One of the standout features of the Honda MM52 is its robust and efficient 4-stroke engine. This engine not only provides exceptional power but also maintains excellent fuel efficiency, making it a cost-effective choice for prolonged use. The Easy Start technology further enhances user experience, allowing the engine to start with minimal effort, eliminating the frustration associated with traditional pull-start engines.

The MM52 is equipped with a series of adjustable tines that can rotate at different depths, accommodating various soil types and gardening needs. This feature provides the flexibility to cultivate, aerate, and mix soil easily, whether you’re preparing a new garden bed or maintaining an established landscape. The tilling width is also adjustable, allowing for efficient operation in tight spaces or larger open areas.

Comfort is a key consideration in the design of the Honda MM52. It features ergonomic handlebars that can be adjusted for height, providing a more comfortable grip and better control during operation. Additionally, the tiller’s lightweight construction ensures easy maneuverability, reducing fatigue over extended use.

The Honda MM52 is built to withstand the rigors of regular use. Its durable construction includes a robust frame and quality components that ensure longevity and reliability. With Honda’s reputation for engineering excellence, users can expect not just performance but also the durability that comes with a well-built machine.

Safety features have not been overlooked in the design of the MM52. The tiller includes protective guards and a safety lockout system that prevents accidental starts, ensuring user safety during operation.

In conclusion, the Honda Power Equipment MM52 is a powerful mini-tiller that combines efficiency, power, and user-friendly features. With its innovative technologies, adjustable tilling capabilities, and ergonomic design, it stands out as an excellent tool for anyone looking to enhance their gardening or landscaping projects. Investing in the MM52 means investing in a reliable partner for all your tilling needs.
Top Page Image Contents