Krell Industries KPS-20t, KPS-20i/l manual KPS-20 Basic Operation, Input KPS-20i/I to

Page 8

KPS-20 BASIC OPERATION

Below are instructions for a quick installation of the KPS-20. Please refer to

the Typical System Setup illustrations on pages 24, 25, and 26. Also, allow the unit to settle at room temperature before operation is started.

1. Plug the

KPS-20 into

the standard

wall

AC receptacle.

Connect

the KPS-20

output

to

the

appropriate

location:

KPS-20i to preamp

input; KPS-20i/I to

amplifier

or

crossover

input;

KPS-20t

to

D/A processor

input.

Engage

the

power

switch

on the

rear

panel

by

pushing

it up to the

ON position.

This

powers

the

processor

sections in the KPS-20i and KPS-20i/I.

 

 

2. Press the Power button on the front panel or on the remote control to power

the transport stages. The display section will now illuminate. The processor portion of the KPS-20i and KPS-20i/Iis on at all times once the rear panel

switch is engaged. This is to insure thermal stability and improve sonic performance.

3. Press the Open/Close button on the front panel and the top cover assembly

will open, exposing the CD transport and spindle. Place the compact disc, label side up, onto the drive spindle. Place the five point custom clamp onto the drive spindle, securing the CD in place. Make sure the clamp is centered firmly on the custom CD spindle hub. Press the Open/Close button again or Play and the cover will close.

NOTE: In the event that you wish to rapidly change a number of CDs, the KPS-20 can be played with the cover open. Move the switch on the back panel

marked "Manual~Auto" to the "Manual" position..The KPS-20 will now play with the cover open. However, do not forget that you are compromising the

quality of the music when the CD is exposed to light. Also, it is always preferable to close the cover when playing music at a high volume in order to maintain optimum tracking.

4.Press Play on the front panel or remote control. Note: if you pressed Play in step 3 the disc will already be playing. The disc will start playing from track 1. To select a 'different track you can press the track forward {> I} or track back {I <} button until you reach the desired track number or punch the number of the desired track into the keypad on the front panel or rem'ote control.

5.Press the Stop button to stop play.

7

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Krell Playback Systems Table of Contents Introduction Krell PLAYBACKSYSTEM-20 KPS-20Page Unpacking and Placement PlacementAC Power Guidelines General Description of KPS-20 SERIF~ Owners ReferenceFaONTvii w KPS-20 Basic Operation Input KPS-20i/I toComplete Transport Features and Functions REPHow to Create an A/B Loop How to Gain Access to a Specific Time in a Track HOW to Write a ProgramHow to Write a DMS Program DMSHow to Play a DMS Program How to Erase a DMS ProgramEmphasis LED KPS-20i and KPS-20i/I DetailsAnalog Output Connections Digital Outputs KPS-20i and KPS-20i/1 DetailsDigital Input Connections KPS-20i/I Volume Control Volume ControlTransport to Processor Interlink Considerations KPS-20t DetailsDigital Output Connections Howto Connect ST Cables ST/TIME Sync OutputTime Sync Time SyncRemote only Functions Remote ControlRemote Control Operation Battery Installation and Removal Display change~ ~ Questions Answers KPS-20i Typical System Setup KPS-20i/I Typical System Setup KPS-20t Typical System Setup Specifications Warranty and Service Page Krell

KPS-20i/l, KPS-20t, KPS-20i specifications

Krell Industries has long been synonymous with high-end audio excellence, and their KPS-20 series exemplifies this commitment. The KPS-20i, KPS-20t, and KPS-20i/l showcase advanced technologies and features that cater to discerning audiophiles.

At the heart of the KPS-20 series is Krell's proprietary analog processing technology, which delivers unparalleled sound quality. The KPS-20i is equipped with a high-performance DAC (Digital-to-Analog Converter) that supports high-resolution audio formats, ensuring that even the most nuanced recordings are reproduced with clarity and precision. This model is designed to offer an exceptional listening experience, making it perfect for music lovers who prioritize detail and fidelity.

The KPS-20t model focuses on versatility, incorporating multiple input options that allow users to connect various devices. This model’s integrated amplifier provides a robust power output, capable of driving a wide range of speaker systems with ease. The user-friendly interface includes a high-resolution display that simplifies navigation, while also providing real-time feedback about the audio settings being utilized.

One of the standout features of the KPS-20i/l is its lush, full-bodied sound. Krell has utilized their advanced analog circuit design to ensure minimal signal degradation and maximum audio quality. The KPS-20i/l also includes balanced outputs, which are essential for those looking to set up a high-fidelity audio system with minimal interference. This model is especially favored by those who seek to build a reference-grade audio environment.

Each model in the KPS-20 series showcases Krell's commitment to craftsmanship. The meticulously designed chassis not only looks stunning but also serves to reduce unwanted vibrations. Built with premium materials, these models are engineered for durability while also enhancing aesthetic appeal.

In summary, the Krell KPS-20 series—comprising the KPS-20i, KPS-20t, and KPS-20i/l—captures the essence of high-fidelity audio. With cutting-edge technology, versatile connectivity, and exemplary construction, Krell continues to set industry standards. Whether you're an audiophile seeking the ultimate listening experience or a casual listener valuing quality, the KPS-20 series offers something for everyone, affirming Krell Industries' status as a leader in high-performance audio.
Top Page Image Contents