Krell Industries KPS-20t KPS-20i and KPS-20i/I Details, Analog Output Connections, Emphasis LED

Page 14

KPS-20i AND KPS-20i/I DETAILS

This is a description of the additional features and functions commonto the

KPS-20i and KPS-20i/I.Please contact your KRELLdealer or the KRELLstaff for assistance if there are any questions not covered~in this Reference. Please

refer to the KPS-20i and KPS-20i/ITypical System Setups illustrations on pages 24 and 25.

CAUTION: When making connections to this component or any other, make sure

the power amplifier is OFF and the preamplifier is in the MUTEor STANDBY mode.

ANALOG OUTPUT CONNECTIONS

The KPS-20i and KPS-20i/Iare equipped with two analog output

configurations: Single-ended via RCA connectors and balanced via XLR

connectors. If your preamplifier has high level balanced inputs, we recommend

the balanced outputs be used. There are considerable sonic benefits to be gained with use of the balanced format.

The XLRpin configuration is described below.

Pin 1 Ground

°)

Pin 2 Non-inverting (0

°)

Pin 3 Inverting ( 180

The left and right channel RCAand balanced outputs are labeled on the back

panel. Care should be taken that the correct left/right orientation is maintained.

NOTE: These two outputs can be used to simultaneously feed different systems.

EMPHASIS

LED

 

 

 

 

 

 

 

 

Emphasis

is

part

of an

encode/decode

recording

technique.

Discs

and/or

tracks that

were

recorded

with this process

will

cause

the Emphasis

LED to

illuminate.

 

Whenthe Emphasis LEDis lit

the

appropriate

circuitry

is activated

to provide

fiat frequency

response.

 

 

 

~

 

 

13

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Krell Playback Systems Table of Contents Introduction Krell PLAYBACKSYSTEM-20 KPS-20Page Unpacking and Placement PlacementAC Power Guidelines General Description of KPS-20 SERIF~ Owners ReferenceFaONTvii w KPS-20 Basic Operation Input KPS-20i/I toComplete Transport Features and Functions REPHow to Create an A/B Loop How to Gain Access to a Specific Time in a Track HOW to Write a ProgramHow to Write a DMS Program DMSHow to Play a DMS Program How to Erase a DMS ProgramEmphasis LED KPS-20i and KPS-20i/I DetailsAnalog Output Connections Digital Outputs KPS-20i and KPS-20i/1 DetailsDigital Input Connections KPS-20i/I Volume Control Volume ControlTransport to Processor Interlink Considerations KPS-20t DetailsDigital Output Connections Howto Connect ST Cables ST/TIME Sync OutputTime Sync Time SyncRemote only Functions Remote ControlRemote Control Operation Battery Installation and Removal Display change~ ~ Questions Answers KPS-20i Typical System Setup KPS-20i/I Typical System Setup KPS-20t Typical System Setup Specifications Warranty and Service Page Krell

KPS-20i/l, KPS-20t, KPS-20i specifications

Krell Industries has long been synonymous with high-end audio excellence, and their KPS-20 series exemplifies this commitment. The KPS-20i, KPS-20t, and KPS-20i/l showcase advanced technologies and features that cater to discerning audiophiles.

At the heart of the KPS-20 series is Krell's proprietary analog processing technology, which delivers unparalleled sound quality. The KPS-20i is equipped with a high-performance DAC (Digital-to-Analog Converter) that supports high-resolution audio formats, ensuring that even the most nuanced recordings are reproduced with clarity and precision. This model is designed to offer an exceptional listening experience, making it perfect for music lovers who prioritize detail and fidelity.

The KPS-20t model focuses on versatility, incorporating multiple input options that allow users to connect various devices. This model’s integrated amplifier provides a robust power output, capable of driving a wide range of speaker systems with ease. The user-friendly interface includes a high-resolution display that simplifies navigation, while also providing real-time feedback about the audio settings being utilized.

One of the standout features of the KPS-20i/l is its lush, full-bodied sound. Krell has utilized their advanced analog circuit design to ensure minimal signal degradation and maximum audio quality. The KPS-20i/l also includes balanced outputs, which are essential for those looking to set up a high-fidelity audio system with minimal interference. This model is especially favored by those who seek to build a reference-grade audio environment.

Each model in the KPS-20 series showcases Krell's commitment to craftsmanship. The meticulously designed chassis not only looks stunning but also serves to reduce unwanted vibrations. Built with premium materials, these models are engineered for durability while also enhancing aesthetic appeal.

In summary, the Krell KPS-20 series—comprising the KPS-20i, KPS-20t, and KPS-20i/l—captures the essence of high-fidelity audio. With cutting-edge technology, versatile connectivity, and exemplary construction, Krell continues to set industry standards. Whether you're an audiophile seeking the ultimate listening experience or a casual listener valuing quality, the KPS-20 series offers something for everyone, affirming Krell Industries' status as a leader in high-performance audio.
Top Page Image Contents