Krell Industries KPS-20i/l, KPS-20t manual General Description of KPS-20 SERIF~ Owners Reference

Page 6

GENERAL DESCRIPTION OF KPS-20 SERIF_~ OWNER'S REFERENCE

The features, functions and operation of the transport are identical for all

three KPS-20 Series products. Descriptions of them are divided into two

sections: Basic Operation provides a quick installation procedure; Complete

Transport Features and Functions provides details on all KPS-20 transport

capabilities. Features specific to the KPS-20i, KPS-20i// and KPS-20t are described on pages 13, 15 and 16 respectively.

As with all sophisticated products, a complete reading of this Owner's

Reference will provide thorough understanding of the KPS-20 Series products.

Please contact your authorized dealer, distributor or the factory if you have any questions not addressed by this Reference.

IMPORTANTNOTE: The use of CD rings, mats, or other devices attached to

individual CDs is not recommended. To be completely effective, the KPS-20 clamp must make direct contact with the CD. Otherwise, erratic playback and~or poor sound may occur

AC POWER GUIDELINES

 

 

 

 

 

 

 

 

 

 

The KPS-20 has

superb

regulation

and

does

not

require

a dedicated

AC

circuit.

We strongly

advise against

connections

through

extension

cords

or

multiple

AC adapters.

High

quality

15 amp grounded

AC strips

are

acceptable.

 

High quality ACline

conditioners or

filters

can be utilized

if

they

are

grounded

and meet or exceed the unit's Power Supply rating of 100VA.

 

 

 

 

CAUTION: Do not remove or bypass the ground pin on the end of the AC cord.

This may cause RFI (radio frequency interference) to be induced into your playback system.

5

Image 6
Contents Krell Playback Systems Table of Contents Introduction Krell PLAYBACKSYSTEM-20 KPS-20Page Unpacking and Placement PlacementAC Power Guidelines General Description of KPS-20 SERIF~ Owners ReferenceFaONTvii w KPS-20 Basic Operation Input KPS-20i/I toComplete Transport Features and Functions REPHow to Create an A/B Loop How to Gain Access to a Specific Time in a Track HOW to Write a ProgramHow to Write a DMS Program DMSHow to Play a DMS Program How to Erase a DMS ProgramKPS-20i and KPS-20i/I Details Analog Output ConnectionsEmphasis LED KPS-20i and KPS-20i/1 Details Digital Input ConnectionsDigital Outputs KPS-20i/I Volume Control Volume ControlKPS-20t Details Digital Output ConnectionsTransport to Processor Interlink Considerations Howto Connect ST Cables ST/TIME Sync OutputTime Sync Time SyncRemote Control Remote Control OperationRemote only Functions Battery Installation and Removal Display change~ ~ Questions Answers KPS-20i Typical System Setup KPS-20i/I Typical System Setup KPS-20t Typical System Setup Specifications Warranty and Service Page Krell

KPS-20i/l, KPS-20t, KPS-20i specifications

Krell Industries has long been synonymous with high-end audio excellence, and their KPS-20 series exemplifies this commitment. The KPS-20i, KPS-20t, and KPS-20i/l showcase advanced technologies and features that cater to discerning audiophiles.

At the heart of the KPS-20 series is Krell's proprietary analog processing technology, which delivers unparalleled sound quality. The KPS-20i is equipped with a high-performance DAC (Digital-to-Analog Converter) that supports high-resolution audio formats, ensuring that even the most nuanced recordings are reproduced with clarity and precision. This model is designed to offer an exceptional listening experience, making it perfect for music lovers who prioritize detail and fidelity.

The KPS-20t model focuses on versatility, incorporating multiple input options that allow users to connect various devices. This model’s integrated amplifier provides a robust power output, capable of driving a wide range of speaker systems with ease. The user-friendly interface includes a high-resolution display that simplifies navigation, while also providing real-time feedback about the audio settings being utilized.

One of the standout features of the KPS-20i/l is its lush, full-bodied sound. Krell has utilized their advanced analog circuit design to ensure minimal signal degradation and maximum audio quality. The KPS-20i/l also includes balanced outputs, which are essential for those looking to set up a high-fidelity audio system with minimal interference. This model is especially favored by those who seek to build a reference-grade audio environment.

Each model in the KPS-20 series showcases Krell's commitment to craftsmanship. The meticulously designed chassis not only looks stunning but also serves to reduce unwanted vibrations. Built with premium materials, these models are engineered for durability while also enhancing aesthetic appeal.

In summary, the Krell KPS-20 series—comprising the KPS-20i, KPS-20t, and KPS-20i/l—captures the essence of high-fidelity audio. With cutting-edge technology, versatile connectivity, and exemplary construction, Krell continues to set industry standards. Whether you're an audiophile seeking the ultimate listening experience or a casual listener valuing quality, the KPS-20 series offers something for everyone, affirming Krell Industries' status as a leader in high-performance audio.