Honda Power Equipment BC100 manual Lock Washer

ASSEMBLY

1.Install the wheel assemblies on the frame, using eight 3/8 x l-inch hex bolts, eight 318 inch lock washers, and eight 3/8-inch lock nuts. Take care not to let the washers pinch the pivot seal on the wheel assembly. Torque the lock nuts to 15 ft-lb (3.5 kg-m, 34 Nom).

2.Apply grease to the grease fittings on the axles and swivels.

GREASE: NLGI #2 multi-purpose grease.

3.Inflate the tires

TIRE PRESSURE: 30 psi (207 kPa)

4.Install the U-bracket on the cart bed, using three 5/l 6 x 3/4-inch pan-head screws, three 5/l 6-inch flat washers, three 5/l 6 lock washers, and three 5/ 16 self-locking nuts. Torque the lock nuts to 14 ft-lb (1.9 kg-m, 19 Nom).

5.Turn the cart bed upside down. Install the frame on the U-bracket, using two l/2 x 1-l/4-inch hex bolts and two l/2-inch lock nuts. Torque the lock nuts to 60 ft-lb (8.3 kg-m, 81 Nom).

ASSEMBLY

+-3/B” HEX NUT (8)

3/8” LOCK WASHER (8)

’3/8 x 1” HEX BOLT (8)

” LOCK WASHER (3)

\5/16” FLAT WASHER (3)

5116 x 314” PAN HEAD SCREW (3)

HEX BOLT (2)

LOCKING NUT

Overtightening the l/2-inch lock nuts will bend the frame brackets.

BClOOQ BAGGER CART 17